Puig 21960H

Puig 21960H New Generation Sport Windscreen Instruction Manual

Model: 21960H | Brand: Puig

For Honda CB650R Neo Sports Cafe 2024 and CB650R Neo Sports Cafe eClutch 2024

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Puig 21960H New Generation Sport Windscreen. Designed specifically for the Honda CB650R Neo Sports Cafe 2024 and CB650R Neo Sports Cafe eClutch 2024, this windscreen enhances both the aesthetics and aerodynamic performance of your motorcycle. Please read these instructions carefully before proceeding with installation or use.

2. Safety Information

  • Always wear appropriate safety gear, including eye protection, during installation.
  • Ensure the motorcycle is stable and securely supported before beginning any work.
  • Do not overtighten fasteners, as this may damage components. Refer to your motorcycle's service manual for torque specifications if available.
  • After installation, verify that all components are securely fastened and do not interfere with the motorcycle's controls or operation.
  • This product is approved for public road use and includes a TÜV homologation certificate.

3. Package Contents

Verify that all components are present before beginning installation:

  • Puig New Generation Sport Windscreen (Model 21960H)
  • Mounting Kit (specific to Honda CB650R Neo Sports Cafe 2024 models)
  • Detailed Installation Instructions (this manual)
  • TÜV Homologation Certificate

4. Setup and Installation

Installation is designed to be straightforward and typically takes less than 20 minutes. No specialized mechanical skills are required, but basic tools will be needed.

  1. Prepare the Motorcycle: Park your Honda CB650R on a level surface and ensure it is stable. Turn off the engine and remove the ignition key.
  2. Identify Mounting Points: Locate the designated mounting points on your motorcycle, typically around the headlight or dashboard area. Refer to the specific diagrams provided in your physical mounting kit instructions for precise locations.
  3. Attach Mounting Brackets: Secure the provided mounting brackets to the motorcycle using the hardware included in the kit. Ensure they are finger-tight initially.
  4. Position the Windscreen: Carefully align the Puig New Generation Sport Windscreen with the attached mounting brackets.
  5. Secure the Windscreen: Attach the windscreen to the brackets using the remaining hardware. Once aligned, gradually tighten all fasteners, ensuring even pressure. Do not overtighten.
  6. Final Check: After installation, gently shake the windscreen to ensure it is firmly attached. Verify that it does not obstruct your view, steering, or any other controls.
Side view of Puig 21960H windscreen installed on a Honda CB650R Neo Sports Cafe 2024 motorcycle.

Image 1: Side view of the Puig 21960H windscreen installed on a Honda CB650R Neo Sports Cafe 2024 motorcycle, showcasing its integration with the bike's design.

Front-quarter view of Puig 21960H windscreen on a Honda CB650R Neo Sports Cafe 2024 motorcycle, highlighting the headlight area.

Image 2: Front-quarter view of the Puig 21960H windscreen on a Honda CB650R Neo Sports Cafe 2024 motorcycle, showing how it surrounds the upper part of the headlight.

5. Operating (Usage)

The Puig New Generation Sport Windscreen is designed to improve your riding experience by enhancing aerodynamics and providing protection.

  • Aerodynamic Protection: The windscreen reduces wind pressure on the rider, contributing to a more comfortable and less fatiguing ride, especially during longer journeys or at higher speeds.
  • Impact and Splash Protection: The high-quality 3mm methacrylate material offers protection against small impacts, debris, and splashes from the road.
  • Visibility: The light smoke finish provides a stylish look while maintaining clear visibility through the windscreen.
Rider's perspective view of the Puig 21960H windscreen installed on a Honda CB650R Neo Sports Cafe 2024 motorcycle.

Image 3: View from the rider's perspective, showing the Puig 21960H windscreen's position relative to the handlebars and dashboard.

6. Maintenance

To ensure the longevity and clarity of your Puig windscreen, follow these maintenance guidelines:

  • Cleaning: Clean the windscreen regularly with a soft cloth and mild soap and water. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the methacrylate.
  • Drying: Dry the windscreen with a clean, soft microfiber cloth to prevent water spots and streaks.
  • Inspection: Periodically inspect the windscreen and its mounting hardware for any signs of damage, cracks, or loose fasteners. Tighten any loose bolts as necessary.
  • Storage: If storing the motorcycle for an extended period, consider covering the windscreen to protect it from dust and UV exposure.

7. Troubleshooting

ProblemPossible CauseSolution
Windscreen feels loose after installation.Fasteners not tightened sufficiently.Check and tighten all mounting bolts. Do not overtighten.
Excessive wind noise or buffeting.Incorrect installation or rider height/position.Ensure windscreen is installed correctly and securely. While the windscreen reduces pressure, some wind noise is normal. Adjust riding posture if possible.
Scratches or haziness on the windscreen.Improper cleaning methods or abrasive materials used.Clean only with mild soap and water and a soft cloth. Avoid harsh chemicals. Minor scratches may be polished with specialized plastic polish.

8. Specifications

  • Model: Puig New Generation Sport Windscreen (21960H)
  • Compatibility: Honda CB650R Neo Sports Cafe 2024, Honda CB650R Neo Sports Cafe eClutch 2024
  • Material: High-quality 3mm Methacrylate
  • Dimensions (W x H): 348 x 290 mm (approximately 13.7 x 11.4 inches)
  • Height above dashboard: 175 mm (approximately 6.9 inches)
  • Color: Light Smoke (Ahumado)
  • Item Weight: 890 g (approximately 1.96 lbs)
  • Installation Time: Less than 20 minutes
  • Homologation: TÜV certified, approved for public road use
  • Manufacturer: Motoplastic, S.A.
  • Origin: Designed and manufactured in Barcelona, Spain
Graphic showing Puig product features: OEM Compatible, Product Tested, 60 Years Experience, Designed in Barcelona.

Image 4: Key features of Puig products, including OEM compatibility, product testing, 60 years of experience, and design/manufacturing in Barcelona.

9. Warranty and Support

Puig products are manufactured to high-quality standards. For specific warranty information, please refer to the documentation included with your product or visit the official Puig website. For technical support or inquiries regarding your Puig 21960H windscreen, please contact Puig customer service through their official channels.

Official Website: www.puig.tv

Brand Store: Puig Amazon Store

Related Documents - 21960H

Preview Puig PRO 2.0 Crash Pads Installation Guide for Honda CB650F/CB650R
Comprehensive installation guide and parts list for Puig PRO 2.0 Crash Pads (Protector Motor) designed for Honda CB650F (2014-2019) and Honda CB650R Neo Sports Cafe (2019-2022). Includes assembly steps, torque specifications, warnings, and detailed part identification.
Preview Puig Semifairing Retro Mounting Instructions for Honda CB650R '24-
Comprehensive guide for installing the Puig Semifairing Retro (Black and Carbon Look) on the Honda CB650R 2024 model. Includes a detailed parts list, step-by-step assembly instructions with torque specifications, and visual descriptions of diagrams.
Preview Puig Downforce Sport Side Spoilers Mounting Instructions for Honda CBR650R '21-
Detailed installation guide for Puig Downforce Sport Side Spoilers (REF 21333) on the Honda CBR650R '21-. Includes parts list, tools required, and step-by-step assembly instructions.
Preview Instrucciones de Montaje Puig Frontal Spoiler GP para Honda CBR600RR '24-
Guía detallada de montaje para el Puig Frontal Spoiler GP, diseñado específicamente para la motocicleta Honda CBR600RR modelo '24-. Incluye lista de piezas y pasos de instalación.
Preview Puig V-Tech Touring Windscreen Mounting Instructions for Yamaha NMAX 125 (2021-)
Detailed mounting instructions for the Puig V-Tech Touring windscreen on the Yamaha NMAX 125 (2021 model year and onwards). Includes parts list and step-by-step assembly guide.
Preview Puig Wave Windshield Mounting Instructions - Universal & Kawasaki Z900RS
Comprehensive mounting instructions for Puig Wave Windshields. This guide covers universal fitment (REF 2208) with detailed parts lists and assembly steps, as well as specific installation for the Kawasaki Z900RS '18- kit (REF 10931). Includes important warnings regarding thread-lock glue and maintenance tips.