Hamilton Beach FlexBrew Advanced 4-in-1 Single Serve Hot & Iced Coffee Maker

Introduction

This manual provides instructions for the safe and efficient operation of your Hamilton Beach FlexBrew Advanced 4-in-1 Single Serve Coffee Maker. This appliance is designed to brew both hot and iced coffee using either K-Cup®* pods or ground coffee. Please read all instructions carefully before use and retain for future reference.

*K-CUP is a registered trademark of Keurig Green Mountain, Inc. Use of the K-CUP trademark does not imply any affiliation with or endorsement by Keurig Green Mountain, Inc.

Important Safeguards

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons, including the following:

• Read all instructions.
• Do not touch hot surfaces. Use handles or knobs.
• To protect against electrical shock, do not place cord, plug, or coffee maker in water or other liquid.
• Close supervision is necessary when any appliance is used by or near children.
• Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.
• Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been dropped or damaged in any manner. Contact manufacturer for information on examination, repair, or adjustment.
• The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock, or injury to persons.
• Do not use outdoors.
• Do not let cord hang over edge of table or counter, or touch hot surfaces.
• Do not place on or near a hot gas or electric burner, or in a heated oven.
• To disconnect, turn any control to "off," then remove plug from wall outlet.
• Do not use appliance for other than intended use.
• Scalding may occur if the lid is removed during the brewing cycle.

Parts and Features

Familiarize yourself with the components of your coffee maker:

• Removable 45 oz. Water Reservoir
• Lid
• Pod Holder
• Single-Serve Brew Basket for Ground Coffee
• Brew Head
• LED Touchscreen Display
• Cup Rest (removable)
• Drip Tray

Image: The Hamilton Beach FlexBrew Advanced 4-in-1 Single Serve Coffee Maker, showcasing its compact design and ability to brew both hot and iced coffee. A light blue mug of hot coffee sits on the cup rest, and a clear tumbler of iced coffee is next to it.

Setup and First Use

1. Unpack: Remove all packaging materials and accessories.
2. Clean Components: Wash the removable water reservoir, pod holder, single-serve brew basket, cup rest, and drip tray in warm, soapy water. Rinse thoroughly and dry.
3. Position: Place the coffee maker on a flat, stable surface. Ensure it is only 5.5 inches wide, making it suitable for compact spaces.
4. Fill Water Reservoir: Fill the removable 45 oz. water reservoir with fresh, cold water up to the MAX fill line. Place it back onto the coffee maker.
5. First Clean Cycle: Before brewing coffee, run a clean cycle.
   • Ensure no pod or ground coffee is in the brew head.
   • Place a large mug or container on the cup rest.
   • Select a large brew size (e.g., 14 oz) and press the brew button.
   • Discard the hot water after the cycle is complete. Repeat if desired.

Image: A front view of the Hamilton Beach FlexBrew coffee maker on a kitchen counter, illustrating its compact dimensions: 5.5 inches wide, 10.7 inches deep, and 12.8 inches high. A clear cup with ice is positioned on the cup rest, and the pod holder and ground coffee basket are shown separately.

Image: A hand lifting the removable 45 oz. water reservoir from the back of the Hamilton Beach FlexBrew coffee maker, demonstrating its easy removal for filling or cleaning. The reservoir is transparent, showing the water level.

Operating Instructions

Brewing Hot Coffee with a K-Cup®* Pod

1. Ensure the water reservoir is filled with fresh, cold water.
2. Lift the brew head handle.
3. Insert a K-Cup®* pod into the pod holder. Close the brew head handle firmly until it clicks.
4. Place your mug on the cup rest. The cup rest is removable to accommodate travel mugs up to 7.5 inches tall.
5. On the LED touchscreen, select your desired hot coffee brew size (8, 10, 12, or 14 oz).
6. To adjust strength, press the coffee bean icon for "Bold" brew if desired, or leave for "Regular" brew.
7. Press the brew button (power icon) to start brewing. The coffee maker will brew an 8 oz. cup in approximately 2 minutes.
8. When brewing is complete, carefully remove your mug.

Brewing Hot Coffee with Ground Coffee

1. Ensure the water reservoir is filled with fresh, cold water.
2. Lift the brew head handle.
3. Place the single-serve brew basket into the brew head. Add your desired amount of ground coffee (refer to coffee packaging for recommended amounts). Do not overfill.
4. Close the brew head handle firmly until it clicks.
5. Place your mug on the cup rest.
6. On the LED touchscreen, select your desired hot coffee brew size (8, 10, 12, or 14 oz).
7. To adjust strength, press the coffee bean icon for "Bold" brew if desired, or leave for "Regular" brew.
8. Press the brew button (power icon) to start brewing.
9. When brewing is complete, carefully remove your mug.

Brewing Iced Coffee with a K-Cup®* Pod

1. Ensure the water reservoir is filled with fresh, cold water.
2. Fill your serving cup with ice.
3. Lift the brew head handle.
4. Insert a K-Cup®* pod into the pod holder. Close the brew head handle firmly until it clicks.
5. Place your ice-filled cup on the cup rest.
6. On the LED touchscreen, select your desired iced coffee brew size (10, 12, or 14 oz).
7. Press the brew button (power icon) to start brewing.
8. When brewing is complete, carefully remove your cup.

Brewing Iced Coffee with Ground Coffee

1. Ensure the water reservoir is filled with fresh, cold water.
2. Fill your serving cup with ice.
3. Lift the brew head handle.
4. Place the single-serve brew basket into the brew head. Add your desired amount of ground coffee.
5. Close the brew head handle firmly until it clicks.
6. Place your ice-filled cup on the cup rest.
7. On the LED touchscreen, select your desired iced coffee brew size (10, 12, or 14 oz).
8. Press the brew button (power icon) to start brewing.
9. When brewing is complete, carefully remove your cup.

Image: A close-up view of the Hamilton Beach FlexBrew coffee maker's LED touchscreen, showing the "Hot" brew setting at 14 oz and a finger pressing the "Bold" coffee bean icon to select a stronger brew strength.

Image: The Hamilton Beach FlexBrew coffee maker actively brewing hot coffee into a light blue mug. A graphic overlay indicates "Brews in 2 min," highlighting the fast brewing capability for an 8 oz. cup.

Image: The Hamilton Beach FlexBrew coffee maker displayed on a kitchen counter, surrounded by various cup sizes. Graphics indicate available iced coffee sizes (10 oz, 12 oz, 14 oz) and hot coffee sizes (8 oz, 10 oz, 12 oz, 14 oz), demonstrating the customization options.

Maintenance and Cleaning

Regular cleaning ensures optimal performance and extends the life of your coffee maker.

• Daily Cleaning:
  • Unplug the coffee maker.
  • Remove the pod holder, single-serve brew basket, cup rest, and drip tray. Wash these parts in warm, soapy water or on the top rack of a dishwasher.
  • Wipe the exterior of the coffee maker with a damp cloth. Do not immerse the coffee maker in water.
  • The LED touchscreen can be wiped clean with a damp cloth.
• Descaling (Mineral Deposit Removal):

  Over time, mineral deposits (calcium) can build up in your coffee maker, affecting performance. Descale every 1-3 months, depending on water hardness.

  1. Empty the water reservoir.
  2. Fill the reservoir with one part white vinegar and two parts cold water.
  3. Place a large mug on the cup rest.
  4. Run several brew cycles until the reservoir is empty. Do not use a pod or ground coffee during this process.
  5. Rinse the reservoir and fill with fresh, cold water.
  6. Run several more brew cycles with fresh water to flush out any remaining vinegar.

Troubleshooting

Specifications

• Model: 49925
• Brand: Hamilton Beach
• Color: Black
• Product Dimensions: 10.7"D x 5.5"W x 12.8"H
• Water Reservoir Capacity: 45 oz.
• Coffee Input Type: K-Cup®* Pods, Ground Coffee
• Brew Strength Options: Regular, Bold
• Hot Coffee Brew Sizes: 8 oz, 10 oz, 12 oz, 14 oz
• Iced Coffee Brew Sizes: 10 oz, 12 oz, 14 oz
• Voltage: 120V
• Human Interface Input: Touchscreen
• Included Components: FlexBrew Advanced coffee machine, removable 45 oz. water reservoir, pod holder, single-serve brew basket for ground coffee.

Warranty and Support

For warranty information, product registration, or customer support, please refer to the official Hamilton Beach website or contact their customer service department. Keep your purchase receipt as proof of purchase for warranty claims.

Online Support: Visit www.hamiltonbeach.com

Customer Service: Refer to your product packaging or the Hamilton Beach website for current contact information.