Introduction
This manual provides comprehensive instructions for the installation, use, and maintenance of your Futanwei Tempered Glass Screen Protector for the FOXBOX FV6 Smart Watch. Please read this guide carefully to ensure proper application and optimal performance of the product.
Image: FOXBOX FV6 Smartwatch with the Futanwei screen protector applied, illustrating its protective coverage.
Compatibility
This screen protector is specifically designed for the FOXBOX FV6 Smart Watch (1.85 Inches). Ensure your device model matches this specification for a perfect fit and optimal protection. It is not compatible with other smartwatch models.
Installation Guide
Follow these steps carefully for a bubble-free and precise installation of your screen protector.
- Step 1: Clean the Screen
Gently clean your smartwatch screen using the included wet wipe (labeled "1"). Follow this by drying the screen thoroughly with the dry wipe (labeled "2"). Ensure no dust, smudges, or moisture remains on the screen surface. - Step 2: Remove Dust
Use the provided dust absorber sticker to carefully remove any remaining dust particles from the screen. Lightly dab the sticker across the screen surface. - Step 3: Prepare the Protector
Carefully peel off the protective film from the back of the tempered glass screen protector. Avoid touching the adhesive side to prevent fingerprints. - Step 4: Align and Apply
Align the screen protector precisely with your smartwatch screen. Once aligned, gently press the middle part of the protector with your finger. The adhesive will spread automatically. If bubbles appear, gently push them towards the edges with a soft cloth.
Image: Visual guide detailing the four steps for screen protector installation: cleaning, dust removal, film peeling, and application.
Product Features
- 9H Hardness: Provides superior scratch resistance, protecting your smartwatch screen from daily wear and tear.
- Oleophobic and Hydrophobic Coating: Repels sweat and oil residue, reducing fingerprints and making the screen easier to clean.
- High Transparency (99.9%): Maintains the original display quality, ensuring clear visuals and vibrant colors without distortion.
- High Touch Sensitivity: Preserves the original touch response of your smartwatch, allowing for smooth and accurate interactions.
- Bubble-Free Application: Designed for easy, seamless application without air bubbles when following the installation guide.
- Shatterproof Design: In case of extreme impact, the tempered glass is designed to break into small, blunt pieces, making it safer than regular glass.
- Case Friendly: Engineered to fit with most smartwatch cases without interference.
Image: Infographic highlighting the main features of the Futanwei screen protector, including its hardness, transparency, and protective qualities.
Maintenance
To maintain the clarity and effectiveness of your screen protector:
- Wipe the screen gently with a soft, lint-free cloth to remove smudges or fingerprints.
- Avoid using harsh chemicals or abrasive materials, as these can damage the oleophobic coating.
- If the screen protector becomes severely scratched or damaged, it is recommended to replace it to maintain optimal protection and visual clarity.
Troubleshooting
- Bubbles After Installation: Small bubbles often disappear within 24-48 hours. For larger bubbles, gently lift the nearest edge of the protector and reapply, pushing the bubble out with a soft cloth. Ensure the screen is completely dust-free before reapplication.
- Misalignment: If the protector is misaligned, carefully lift it from one corner and re-align. This is best done immediately after initial application.
- Reduced Touch Sensitivity: Ensure the screen protector is fully adhered to the screen. If issues persist, verify that the protector is indeed for the FOXBOX FV6 model, as incorrect sizing can affect sensitivity.
Specifications
| Brand | Futanwei |
| Compatible Model | FOXBOX FV6 Smart Watch (1.85 Inches) |
| Material | Tempered Glass |
| Item Hardness | 9H |
| Special Features | Anti-Scratch, Anti-Fingerprint, Bubble Free, Oleophobic, Hydrophobic |
| Finish Type | Glossy |
| Product Dimensions | 7.2 x 4.2 x 0.5 inches (Package) |
| Item Weight | 0.32 ounces |
Warranty and Support
Specific warranty information for this product is not provided in this manual. For details regarding warranty coverage, returns, or technical support, please contact the manufacturer, Futanwei, or your point of purchase directly. Refer to the product packaging or the seller's website for contact information.
Disclaimer
While this screen protector is designed to offer significant protection, Futanwei cannot guarantee that your device will be immune to all forms of damage. This product is intended to reduce the risk of scratches and minor impacts to the screen.
