1. Product Overview
The Anpviz JB35X is a full metal ceiling mount junction box bracket designed for specific Anpviz IP PoE cameras. This bracket provides a secure and organized solution for camera installation, protecting network cables from environmental elements.
Key Features:
- Full metal construction with surface spray treatment for durability.
- Integrated cable holes for organized cable management and protection.
- Suitable for both indoor and outdoor ceiling mounting applications.
Compatibility:
This junction box is compatible with the following Anpviz camera series:
- U-Series Cameras: IPC-D350W-S, IPC-D363WD-SA, IPC-D383WD-SA, IPC-D351WD-SL, IPC-D381WD-SL.
- H-Series Cameras: IPC-D3053WD-S, IPC-D3083WD-S, IPC-D383WD-S, IPC-D3653WD-SA, IPC-D3853WD-SA.
Figure 1: Front view of the Anpviz JB35X Ceiling Mount Junction Box Bracket. This image shows the white, circular metal housing designed to protect camera wiring.
2. Package Contents
Please verify that all items are present in the package:
- Anpviz JB35X Junction Box Bracket
- Mounting Screws
- Other accessories as specified by the manufacturer (e.g., holes sticker, cable tie, foam pad, if applicable).
Figure 2: Diagram illustrating the Anpviz JB35X junction box, its compatibility with certain camera models, and a list of included accessories such as screws, cable tie, and foam pad.
3. Installation Guide
Follow these steps for proper installation of the Anpviz JB35X junction box bracket.
- Prepare the Mounting Surface: Ensure the ceiling or wall surface is clean, flat, and capable of supporting the weight of the junction box and the camera.
- Mark Drilling Points: Use the junction box as a template to mark the drilling points for the mounting screws. Ensure proper alignment for cable entry. Refer to the dimension diagram for precise measurements.
- Drill Holes: Drill pilot holes at the marked locations. The size of the drill bit should be appropriate for the provided mounting screws and any wall anchors if necessary.
- Route Cables: If routing cables through the mounting surface, ensure the necessary holes are made for cable passage into the junction box.
- Mount the Junction Box: Secure the junction box to the prepared surface using the provided screws. Ensure it is firmly attached and stable.
- Connect Camera Wiring: Route the camera's network and power cables through the designated cable holes in the junction box. Make all necessary connections inside the box.
- Attach the Camera: Mount the compatible Anpviz camera onto the junction box bracket according to the camera's specific installation instructions. Ensure all connections are secure and weatherproofed if installed outdoors.
Figure 3: Technical diagram displaying the precise dimensions of the Anpviz JB35X junction box, including its diameter (128mm), height (32.5mm), and screw hole spacing (99mm and 51.5mm). This is crucial for accurate installation planning.
4. Operating Instructions
The Anpviz JB35X junction box is a passive mounting accessory. Once installed correctly, its primary function is to provide a stable mounting platform and protect the camera's wiring connections. No active operation is required from the junction box itself.
Ensure that all cables are properly routed and secured within the junction box to prevent damage or interference.
5. Maintenance
To ensure the longevity and optimal performance of your Anpviz JB35X junction box and the attached camera, consider the following maintenance guidelines:
- Regular Inspection: Periodically inspect the junction box and its mounting for any signs of loosening, corrosion, or damage, especially in outdoor environments.
- Cleaning: If necessary, gently clean the exterior of the junction box with a soft, damp cloth. Avoid using harsh chemicals or abrasive materials that could damage the finish.
- Cable Integrity: Ensure that all cables entering and exiting the junction box remain intact and free from cuts or wear.
- Rust Resistance: While the product is designed to be rust-resistant, extreme conditions may still affect its finish over time. Address any signs of rust promptly to prevent further degradation.
6. Troubleshooting
This section addresses common issues related to the installation and function of the junction box.
- Junction Box Not Mounting Securely:
- Verify that the mounting surface is appropriate and structurally sound.
- Ensure the correct drill bit size was used for pilot holes and that screws are fully tightened.
- If mounting to drywall or similar materials, use appropriate wall anchors (not included unless specified).
- Cables Not Fitting or Protected:
- Confirm that cable diameters are within the capacity of the junction box's cable entry points.
- Ensure cables are routed neatly to avoid pinching or excessive bending.
- Camera Not Attaching to Junction Box:
- Double-check the compatibility list in Section 1 to ensure your camera model is supported.
- Align the camera's mounting holes with those on the junction box.
7. Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 4.99 x 4.99 x 1.38 inches (128 x 128 x 35 mm approx.) |
| Item Weight | 10.7 ounces (0.30 kg) |
| Model Number | JB35X |
| Material | Full Metal Design |
| Color | White |
| Special Features | Rust Resistant |
| Mounting Type | Ceiling Mount |
| Compatible Devices | Anpviz U-Series and H-Series IP PoE Cameras |
8. Warranty Information
For detailed warranty information regarding the Anpviz JB35X Ceiling Mount Junction Box Bracket, please refer to the official Anpviz website or contact Anpviz customer support directly. Warranty terms and conditions may vary by region and purchase date.
9. Customer Support
If you encounter any issues or have questions not covered in this manual, please visit the official Anpviz support page or contact their customer service team for assistance. Contact details are typically available on the Anpviz website.
Anpviz Official Website: www.anpviz.com (Please note: This is a placeholder URL. Refer to your product packaging or official Anpviz documentation for the correct support website.)
