PoolMr Cordless Robotic Pool Cleaner User Manual

Introduction

Thank you for choosing the PoolMr Cordless Robotic Pool Cleaner. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new pool cleaner. Please read it thoroughly before first use and keep it for future reference.

Important Safety Information

• Keep away from children.
• Do not vacuum corrosive liquid, flammable or combustible liquids such as gasoline, or operate in the presence of explosive or flammable fumes.
• Never insert or drop any object into any opening on the device. Keep all openings free of leaves, rocks, or anything that may reduce water flow.
• Always turn off and unplugged from the charger before cleaning, filter replacement, or any routine maintenance.
• Do not charge the product with wet hands and barefoot, and do not touch the product with wet hands or barefoot while charging. And keep the machine and charger away from sharp objects or hot surfaces.

Product Overview & Components

The PoolMr Robotic Pool Cleaner is designed for efficient and hassle-free cleaning of above-ground pools. Its unique stingray-like design allows for agile movement and effective debris collection.

The main unit of the PoolMr Cordless Robotic Pool Cleaner.

Included Components:

• PoolMr Ray Robotic Pool Cleaner
• User Manual
• Power Adapter (Charger)
• Retrieval Hook

Unboxing Video:

Setup

Charging the Cleaner:

Before first use, fully charge your PoolMr Robotic Pool Cleaner. The charging time is approximately 4 hours. Ensure the charging port is dry before connecting the power adapter.

The cleaner charging, indicated by the LED light. A full charge takes about 4 hours.

Initial Installation:

The cleaner requires minimal assembly, typically taking about 1 minute. Follow the instructions in the video below for proper installation and preparation for use.

Operating Instructions

One-Click Start:

Simply press the power button on the top of the unit to activate the cleaner. It will begin its cleaning cycle automatically.

The cleaner features a simple one-click start button for easy operation.

Placement in Pool:

Gently lower the cleaner into the pool. It will sink and begin navigating the pool floor. The cleaner is suitable for above-ground pools with depths between 6-82 feet.

Key Cleaning Features:

• Powerful 40W Strong Suction: Equipped with a 0.2-inch suction port and a high-capacity 40LPM water purification system, it removes 2X more debris, 3X more leaves, and 8.5X more sand than conventional models. Ideal for stubborn dirt, tiny sand, and large debris.
• Dual-Layer Cleaning System: Combines a 180µm mesh for leaves and larger debris with a 250µm sponge for fine particles like sand and silt, ensuring thorough cleaning.
• Long 90-Minute Runtime: A robust battery provides up to 90 minutes of cleaning, covering up to 860 sq. ft. on a single charge, perfect for various above-ground pool sizes.
• Exceptional Barrier-Crossing Ability: Easily crosses 0.2-inch wrinkles and drains, and climbs slopes up to 15°. Regular cleaning of the vacuum is recommended to maintain climbing power.
• Debris Backflow Stopping System: An upgraded water outlet system ensures captured debris stays locked inside, preventing trash from flowing back into your pool when lifted.
• Edge Cleaning with Extra Suction: Automatically boosts suction power at pool edges to target stubborn debris and docks securely for thorough cleaning of hard-to-reach spots.
• Improved Cleaning Efficiency: With a boosted travel speed of 52 ft/min, it cleans your pool quickly, saving time and energy.
• Auto-Flip and Smart Parking: Automatically rights itself if it flips over. When the battery is low, it parks near the pool edge for easy retrieval with the included hook.
• Cord-Free Convenience: Cordless design ensures hassle-free operation without limited reach or tripping hazards.

The cleaner efficiently removes various types of debris from your pool.

The dual-layer purification system effectively captures both large and fine particles.

Enjoy extended cleaning sessions with up to 90 minutes of runtime.

The debris backflow stopping system ensures a clean pool after retrieval.

The cleaner boosts suction for thorough edge cleaning.

The cleaner automatically parks near the pool edge when the battery is low.

Maintenance

Cleaning the Filter:

The dual-layer filter system is designed for easy cleaning. Simply remove the filter tray and rinse it with a hose to remove collected debris.

Product Care Instructions:

When not in use, please store the pool vacuum cleaner in a cool, dry place, away from direct sunlight. It is recommended to charge it every 3 months to ensure battery performance.

Troubleshooting

If you encounter any issues with your PoolMr Robotic Pool Cleaner, please refer to the following general troubleshooting tips:

• Cleaner not moving: Ensure the battery is fully charged. Check for any obstructions in the wheels or suction port.
• Reduced suction: Clean the dual-layer filter thoroughly. Accumulated debris can reduce performance.
• Cleaner not parking correctly: Ensure the pool edge is clear of obstructions.
• Unusual noises: Turn off the unit and check for any foreign objects caught in the internal mechanisms.

For more detailed troubleshooting or persistent issues, please contact PoolMr customer support.

Specifications

Warranty & Support

The PoolMr Cordless Robotic Pool Cleaner comes with a 1-year warranty.

For product support, warranty claims, or any inquiries, please visit the official PoolMr Store on Amazon: PoolMr Store