Introduction
Thank you for choosing the ASD 8 Inch LED Indoor Wall Sconce. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new lighting fixture. Please read all instructions carefully before beginning installation and retain this manual for future reference.
Image: The ASD 8 Inch LED Indoor Wall Sconce, showcasing its modern design and matte black finish.
Safety Information
To reduce the risk of death, personal injury, or property damage from fire, electric shock, falling parts, cuts/abrasions, and other hazards, please read all warnings and instructions included with and on the fixture box and all fixture labels.
- Installation must be performed by a qualified electrician in accordance with the National Electrical Code and local codes.
- Always turn off power at the circuit breaker before installation, removal, or servicing.
- Ensure all electrical connections are secure and properly insulated.
- Do not install in wet locations. This fixture is rated for damp locations only.
- Do not modify the fixture or use it for purposes other than its intended use.
Product Features
The ASD LED Indoor Wall Sconce is designed with advanced features for optimal performance and aesthetic appeal:
- Modern Design: Combines stylish aesthetics with efficient lighting, featuring a durable housing resistant to rust and impact.
- Color Selectable (5CCT): Offers five color temperature options (2700K Soft White, 3000K Warm White, 3500K Neutral White, 4000K Cool White, 5000K Daylight) adjustable via a simple switch.
- Dimmable: Smooth Triac dimming from 10% to 100% allows for adjustable brightness and energy saving. Compatible with modern LED dimmers.
- Acrylic Lens: Provides a 215° beam angle for perfectly even light distribution.
- Damp Locations Rated: Suitable for use in areas with moderate moisture.
Image: Visual representation of the sconce's key features, including its durable housing and acrylic lens.
Installation Instructions
Follow these steps for proper installation of your wall sconce. Ensure power is OFF at the circuit breaker before starting.
- Prepare Fixture: Unscrew the two fixture screws from both sides of the wall sconce. Remove the mounting plate and attach it to the existing outlet box using two mounting screws.
- Select Color Temperature: Before connecting wires, choose your preferred color temperature (2700K, 3000K, 3500K, 4000K, or 5000K) by adjusting the switch position located on the fixture.
- Connect Wires: Connect the wires: Black to Black, White to White, and Green to Green (ground). Secure each connection with wire nuts.
- Mount Fixture: Fix the wall sconce to the mounting plate using the two fixture screws on both sides. Before tightening the screws, align the holes of both the fixture and the mounting plate to ensure a solid fit.
Image: Detailed visual guide for the installation process of the wall sconce.
Operating Instructions
Color Temperature Selection
The wall sconce features a 5CCT (Correlated Color Temperature) switch, allowing you to select from five different light temperatures to suit your preference or room ambiance. This switch is located on the fixture and should be set during installation before final mounting.
- 2700K: Soft White, ideal for a warm, cozy atmosphere.
- 3000K: Warm White, slightly brighter than soft white, good for living spaces.
- 3500K: Neutral White, a balanced white light suitable for most general applications.
- 4000K: Cool White, a brighter, more invigorating light, often used in kitchens or offices.
- 5000K: Daylight, a very bright, crisp white light, mimicking natural daylight.
Image: Visual guide to the five selectable color temperature options.
Dimming Function
This fixture is designed for smooth Triac dimming, allowing you to adjust the light output from 10% to 100%. To utilize this feature, ensure you are using a compatible LED dimmer switch (not included) with your electrical system.
Image: Illustration of the seamless dimming capability of the sconce.
Maintenance
The ASD LED Indoor Wall Sconce requires minimal maintenance. Follow these guidelines to ensure its longevity and optimal performance:
- Cleaning: Turn off power before cleaning. Use a soft, dry, or slightly damp cloth to wipe the fixture. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or acrylic lens.
- Inspection: Periodically check for any loose connections or signs of wear. If any issues are found, consult a qualified electrician.
- LED Longevity: The integrated LED light source is designed for a long lifespan (up to 54,000 hours). It is not user-replaceable.
Troubleshooting
If you experience issues with your wall sconce, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture. Loose wire connection. Faulty switch or dimmer. | Check circuit breaker. Verify all wire connections are secure (ensure power is off). Test switch/dimmer or replace if necessary. |
| Light flickers or dims inconsistently. | Incompatible dimmer switch. Loose wire connection. Overloaded circuit. | Ensure dimmer is LED compatible (Triac). Check wire connections. Reduce load on the circuit or consult an electrician. |
| Light output is too low or too high. | Dimmer setting. Incorrect color temperature selected. | Adjust dimmer to desired brightness. Verify the 5CCT switch is set to the preferred color temperature. |
| Fixture is hot to the touch. | Normal operation (LEDs generate some heat). Improper ventilation. | Ensure fixture is installed in an open area with adequate airflow. If excessively hot, turn off power and consult an electrician. |
Product Specifications
Image: Detailed product specifications including dimensions and electrical ratings.
| Specification | Detail |
|---|---|
| Brand | ASD |
| Model Name | LWS-12 |
| Item Model Number | A-LWS12-8D10AC-BK |
| Color | 8 Inch - Matte Black |
| Material | Durable Alloy Aluminum, Frosted Acrylic Glass |
| Style | Contemporary |
| Product Dimensions (L x W x H) | 4.75" x 1.8" x 8.69" (120mm x 47mm x 220mm) |
| Item Weight | 1.43 pounds |
| Power Source | Hardwired |
| Voltage | 120 Volts |
| Wattage | 10 watts |
| Brightness | 611 Lumens |
| Light Color | Adjustable (2700K, 3000K, 3500K, 4000K, 5000K) |
| Color Rendering Index (CRI) | 80.00 |
| Average Life | 54,000 Hours |
| Indoor/Outdoor Usage | Indoor use only |
| Water Resistance Level | Not Water Resistant (Damp Locations Rated) |
| UPC | 810128118071 |
Warranty and Support
ASD provides a 5-year limited warranty for this product, ensuring top quality and safety. This warranty covers defects in materials and workmanship under normal use and service.
Image: ASD product quality assurance and warranty information.
For warranty claims, technical assistance, or any questions regarding your ASD LED Indoor Wall Sconce, please contact ASD customer service. Refer to your purchase documentation for specific contact details or visit the official ASD website.
