Introduction
Thank you for choosing the Ambition Sally 270 Wireless Rotary Tattoo Machine. This manual provides essential information for the safe and effective operation, maintenance, and care of your device. Please read it thoroughly before initial use.
Package Contents:
- 1x Ambition Sally 270 Battery Tattoo Pen
- 1x RCA Adapter
- 1x USB Fast Charging Data Cable
- 1x RCA Clip Cord
- 1x Storage Box
Image: The Ambition Sally 270 machine with its included accessories: RCA adapter, USB charging cable, RCA clip cord, and storage box.
Safety Information
For professional use only. This device is intended for tattooing and permanent makeup applications by trained and certified artists. Improper use can lead to injury or damage to the device.
- External Use Only: This device is for external application only.
- Avoid Contact with Eyes: Keep the device and its components away from eyes.
- Keep Away from Naked Flame: Do not expose the device to open flames or high heat sources.
- Sterilization: Always ensure all components that come into contact with skin are properly sterilized before each use.
- Power Source: Use only the provided charging cable and a 5V/2A charging adapter.
- Battery Care: Do not completely drain the battery before charging, as this can damage the battery.
Product Features
- Material & Design: Constructed from aluminum, featuring a lightweight and slim body. Length: 147 mm (5.8 inches); Diameter: 25 mm (0.98 inches); Weight: 143 g (5 oz).
- Coreless Motor: Equipped with a custom 25x16 mm stainless steel coreless motor, providing stable output and fast coloring. Operates without overheating during extended use. Motor speed: 10V/12000Rpm.
- High Torque: Driven by a 270 g.cm high torque hollow cup motor, enhancing machine stability and reliability. Prevents needle skipping or thread breaking even at low voltages.
- Adjustable Stroke Length: Supports stroke lengths of 2.0mm, 2.3mm, 2.6mm, 2.9mm, 3.2mm, and 3.5mm. Adjust the stroke by turning the knob, suitable for various tattooing styles including soft black and grey shading, blending colors, lip shaping, eyebrow, eyeliner, and hairline procedures.
- Battery & Power: Single battery capacity of 1300 mAh. Provides 4-5 hours of working time at 5-8V. Full charge achieved in approximately 1.5 hours. Features 0.5V voltage adjustment and an LCD high-definition screen display.
- Compatibility: Compatible with major brands of tattoo needle cartridges.
- Dual Mode Operation: Can be used wirelessly with the integrated battery or wired via the included RCA adapter and clip cord.
Image: A table summarizing key specifications of the Ambition Sally 270, including weight, size, motor details, battery capacity, and stroke range.
Image: Close-up view highlighting the 270 g.cm high-torque coreless motor, emphasizing its stability and reliability.
Image: Illustrates the 1-12V wider voltage range and battery charging information, including capacity, life, and charging time.
Image: Demonstrates the adjustable stroke mechanism, showing the range from 2.0mm to 3.5mm and its versatility for various applications.
Image: Highlights the balanced weight, low noise, and minimal vibration features of the machine, contributing to comfort and stable needle output.
Image: Shows the flexibility of switching between wireless operation (with battery) and wired operation (with RCA adapter) for continuous use.
Setup
- Charge the Battery: Before first use, fully charge the battery using the provided USB cable and a 5V/2A adapter. The LCD screen will indicate charging status. Avoid completely draining the battery.
- Attach Needle Cartridge: Insert a compatible tattoo needle cartridge into the machine's grip. Twist gently to secure it in place.
- Adjust Needle Depth: Rotate the grip to adjust the needle depth to your desired setting.
- Wireless Operation: Ensure the battery pack is securely attached to the machine body.
- Wired Operation (Optional): If the battery is depleted or for preference, detach the battery pack and attach the RCA adapter. Connect the RCA clip cord to the adapter and to a compatible power supply (not included).
Operating Instructions
- Power On/Off: Press and hold the power button (usually the central button on the battery pack) to turn the machine on or off. The LCD screen will illuminate.
- Adjust Voltage: Use the '+' and '-' buttons on the battery pack to adjust the operating voltage. The voltage range is 1-12 volts, with 0.5V increments. The LCD screen displays the current voltage.
- Adjust Stroke Length: Rotate the gold-colored adjustment knob on the machine body to select the desired stroke length (2.0mm, 2.3mm, 2.6mm, 2.9mm, 3.2mm, or 3.5mm). This can be done while the machine is running.
- Begin Operation: Once voltage and stroke are set, the machine is ready for use.
- Monitoring: The LCD screen displays voltage, battery level, and working time. Monitor these indicators during operation.
Maintenance
- Cleaning: After each use, wipe down the exterior of the machine with a sterile wipe or disinfectant solution. Ensure no liquids enter the motor housing or battery compartment.
- Sterilization: Components that come into contact with skin or ink must be properly sterilized according to industry standards.
- Lubrication: Periodically apply a small amount of machine oil (specifically designed for tattoo machines) to moving parts as recommended by professional guidelines to ensure smooth operation and longevity.
- Storage: Store the machine in its provided storage box in a clean, dry environment away from direct sunlight and extreme temperatures.
- Battery Care: Do not store the battery completely discharged. Charge it periodically if not in use for extended periods.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Machine not turning on. | Battery discharged; loose connection; power button not pressed correctly. | Charge the battery; ensure battery pack is securely attached or RCA cable is firm; press and hold power button. |
| Machine running weakly or inconsistently. | Low battery; incorrect voltage setting; needle cartridge issue. | Recharge battery; increase voltage; replace needle cartridge. |
| Needle skipping or breaking. | Low voltage; faulty needle cartridge; improper stroke setting. | Increase voltage; replace needle cartridge; verify stroke setting is appropriate for the task. |
| Machine overheating. | Prolonged high voltage use; motor issue. | Reduce voltage or take breaks; if problem persists, contact support. |
Specifications
- Model: Sally 270
- Material: Aluminum
- Length: 147 mm (5.8 inches)
- Diameter: 25 mm (0.98 inches)
- Weight: 143 g (5 oz)
- Motor: Custom 25x16 mm Stainless Steel Coreless Motor
- Motor Speed: 10V/12000Rpm
- Torque: 270 g.cm
- Voltage Range: 1-12 Volts (0.5V adjustment)
- Stroke Lengths: 2.0mm, 2.3mm, 2.6mm, 2.9mm, 3.2mm, 3.5mm (adjustable)
- Battery Capacity: 1300 mAh
- Working Time: 4-5 hours (at 5-8V)
- Charging Time: Approximately 1.5 hours
- Charging Input: 5V/2A (recommended)
- Compatibility: Major brands tattoo needle cartridges
- Product Dimensions: 5.9 x 3 x 2.3 inches (packaged)
- UPC: 810174731576
Warranty and Support
Ambition products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official Ambition website. Keep your purchase receipt as proof of purchase.
Manufacturer: Ambition
For further assistance, please contact Ambition customer service.
