Linkifly XT1 Cordless Vacuum Cleaner User Manual

1. Introduction

Thank you for choosing the Linkifly XT1 Cordless Vacuum Cleaner. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new vacuum cleaner. Please read it thoroughly before first use and keep it for future reference.

The Linkifly XT1 is designed for powerful and versatile cleaning, featuring a 550W brushless motor, up to 70 minutes of runtime, and an intuitive LED touch screen. Its self-standing design and anti-tangle roller brush make cleaning effortless across various surfaces, including carpets and hardwood floors.

2. Safety Information

Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, or injury.

• Do not use outdoors or on wet surfaces.
• Do not allow to be used as a toy. Close attention is necessary when used by or near children.
• Use only as described in this manual. Use only manufacturer's recommended attachments.
• Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.
• Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Do not handle plug or appliance with wet hands.
• Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow.
• Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Use extra care when cleaning on stairs.
• Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
• Do not use without dust cup and/or filters in place.
• Prevent unintentional starting. Ensure the switch is in the off-position before connecting to battery pack, picking up or carrying the appliance.
• Recharge only with the charger specified by the manufacturer.

3. What's Included in the Package

Your Linkifly XT1 Cordless Vacuum Cleaner package includes the following components:

Image: Overview of all included components.

• Vacuum Head (Main Unit)
• Removable Battery
• Extension Tube
• Electronic Floor Brush
• 2-in-1 Brush Tool
• Crevice Tool
• HEPA Filter (x2)
• Charger
• User Manual
• Wall Mount

4. Setup

4.1 Assembly

To assemble your Linkifly XT1 Cordless Vacuum Cleaner, follow these steps:

1. Insert the extension tube into the main vacuum head until it clicks securely into place.
2. Attach the electronic floor brush to the other end of the extension tube, ensuring it clicks firmly.
3. Slide the removable battery into the designated slot on the main vacuum head until it locks.
4. For handheld use, detach the extension tube and attach desired accessories (2-in-1 brush tool or crevice tool) directly to the main vacuum head.

Image: Versatile configurations for different cleaning needs.

4.2 Charging the Battery

Before first use, fully charge the battery. The battery can be charged while attached to the vacuum or separately.

• Connect the charger to the charging port on the battery or the main vacuum unit.
• Plug the charger into a power outlet.
• The LED display will indicate charging status and battery percentage. A full charge provides up to 70 minutes of runtime on Level I (Eco Mode).

4.3 Wall Mount Installation

For convenient storage and charging, you can install the included wall mount.

1. Choose a suitable location near a power outlet.
2. Mark the drilling points using the wall mount as a template.
3. Drill holes and insert wall anchors (if necessary).
4. Secure the wall mount with screws.
5. Hang the vacuum cleaner on the mount for storage and charging.

Image: Wall-mount storage for convenient charging and space-saving.

5. Operating Instructions

5.1 Power On/Off and Suction Modes

The Linkifly XT1 features an intuitive LED touch screen for easy control.

• To power on, press the power button on the handle.
• Use the power level switching button on the LED display to cycle through three suction modes:
  • Level I (Eco Mode): 50-70 minutes runtime, ideal for light cleaning on hard floors.
  • Level II (Standard Mode): 25-30 minutes runtime, suitable for daily cleaning and moderate debris.
  • Level III (Max Mode): 15-20 minutes runtime, for deep cleaning and stubborn dirt on carpets.
• The LED display shows real-time battery percentage, current suction mode, and maintenance alerts.

Image: Intuitive LED display for smart control.

5.2 Cleaning Different Surfaces

The electronic floor brush is designed for effective cleaning on both hard floors and carpets.

• For hard floors, the soft roller brush ensures gentle yet thorough cleaning, capturing fine dust and debris. The integrated LED lights illuminate dust for better visibility.
• For carpets, the powerful suction and anti-tangle roller brush effectively lift embedded dirt and pet hair without clogging.

Image: Powerful suction on hard floors.

Image: Anti-tangle roller brush for hassle-free cleaning.

5.3 Using Attachments

Your vacuum comes with versatile attachments for specialized cleaning tasks:

• 2-in-1 Brush Tool: Ideal for cleaning upholstery, keyboards, and delicate surfaces.
• Crevice Tool: Perfect for reaching tight corners, sofa gaps, and car interiors.
• Extended Tube: Use with attachments for high ceilings or under low furniture.

Image: 2-in-1 Brush Tool for versatile cleaning.

Image: Crevice Tool for hard-to-reach areas.

Image: Extended Tube for reaching high and low.

6. Maintenance

6.1 Emptying the Dust Cup

To maintain optimal suction, empty the dust cup regularly, especially when it reaches the MAX fill line.

1. Ensure the vacuum is turned off.
2. Press the dust cup release button to detach it from the main unit.
3. Hold the dust cup over a trash bin and press the bottom release latch to open the flap and empty contents.
4. Close the flap and reattach the dust cup to the main unit until it clicks.

Image: Easy dust cup emptying for hygienic disposal.

6.2 Cleaning Filters

The Linkifly XT1 features a 5-stage HEPA filtration system. Regular cleaning of filters is crucial for maintaining suction power and air quality.

• Remove the dust cup and then carefully remove the HEPA filter and mesh filter.
• Tap off loose dirt. Rinse filters under cold water until the water runs clear.
• Allow filters to air dry completely for at least 24 hours before reinserting. Do not use a hairdryer or other heating methods.
• Replace HEPA filters every 3-6 months, or as needed, to ensure optimal performance.

Image: 5-Stage HEPA Filtration System for cleaner air.

6.3 Cleaning the Roller Brush

Although designed to be anti-tangle, occasional cleaning of the roller brush may be necessary.

1. Turn off the vacuum and detach the electronic floor brush.
2. Locate the release tab on the side of the brush head and remove the roller brush.
3. Remove any tangled hair or debris using scissors if necessary.
4. Reinsert the roller brush and secure the release tab.

7. Troubleshooting

8. Specifications

9. Warranty and Support

Linkifly is committed to providing exceptional quality and customer satisfaction.

• 12-Month Normal Warranty: Your product is covered by a 12-month warranty from the date of purchase.
• 30-Day Money Back Guarantee: If you are not satisfied with your purchase, you may be eligible for a refund within 30 days.
• 24/7 Customer Support: For any questions, concerns, or assistance, our customer support team is available 24 hours a day, 7 days a week.
• 100% Customer Satisfaction: We strive for complete customer satisfaction with our products and services.

Image: Linkifly's commitment to customer support.

For further assistance, please visit the official Linkifly Store: Linkifly Store on Amazon.