Sandberg Wireless Charger Deck 15W (Model 441-60) User Manual

Introduction

Thank you for choosing the Sandberg Wireless Charger Deck 15W. This manual provides essential information for the safe and efficient use of your new wireless charging device. Please read these instructions carefully before use and retain them for future reference.

Product Overview

The Sandberg Wireless Charger Deck 15W is designed to provide convenient and fast wireless charging for compatible devices. Its compact design makes it suitable for various environments.

Figure 1: Sandberg Wireless Charger Deck 15W. An overhead view of the Sandberg Wireless Charger Deck 15W, featuring a gray fabric surface with the Sandberg logo and a silver-colored metallic edge.

Package Contents:

• Sandberg Wireless Charger Deck 15W (Model 441-60)
• USB-C to USB-A Cable (or similar power cable, depending on model)
• User Manual (this document)

Setup

1. Connect Power: Insert the small end of the provided USB cable into the charging port on the Sandberg Wireless Charger Deck.
2. Connect to Power Source: Plug the larger end of the USB cable into a compatible USB power adapter (not included) or a powered USB port. Ensure the power adapter provides sufficient output (e.g., 9V/2A or 12V/1.5A for 15W charging).
3. Placement: Place the charger deck on a flat, stable surface, away from direct sunlight, heat sources, and metallic objects.
4. Power Indicator: A small LED indicator (if present) may light up briefly to confirm power connection.

Operating Instructions

1. Ensure Compatibility: Verify that your device supports Qi wireless charging.
2. Place Device: Carefully place your Qi-compatible device (e.g., smartphone, earbuds case) onto the center of the Sandberg Wireless Charger Deck.
3. Charging Confirmation:
   • Your device's screen should indicate that it is charging.
   • The charger deck may have an LED indicator that changes color or status to show active charging.
4. Optimal Placement: If charging does not begin, slightly adjust the position of your device on the charging deck until charging is initiated.
5. Remove Device: Once your device is fully charged or you wish to stop charging, simply lift it from the charging deck.

Important Notes:

• Remove any thick protective cases or cases containing metal before charging, as they may interfere with wireless charging.
• Do not place foreign metallic objects (e.g., coins, keys, credit cards) on the charging surface, as this can cause overheating or damage.
• Charging speed may vary depending on the device, power adapter, and environmental conditions.

Maintenance

• Cleaning: Disconnect the charger from the power source before cleaning. Use a soft, dry, lint-free cloth to wipe the surface of the charger. Do not use abrasive cleaners, solvents, or chemical agents.
• Storage: When not in use, store the charger in a cool, dry place, away from extreme temperatures and humidity.
• Handling: Avoid dropping or subjecting the charger to strong impacts. Do not disassemble or attempt to repair the device yourself.

Troubleshooting

Specifications

Warranty and Support

Sandberg products are manufactured to high quality standards. For information regarding warranty terms and conditions, please refer to the official Sandberg website or contact your local retailer.

For technical support or inquiries, please visit the official Sandberg website for contact details and support resources.