Flieks Twin Size Murphy Bed with Bedside Shelves and Wardrobe Bed Frame

Introduction

Thank you for choosing the Flieks Twin Size Murphy Bed with Bedside Shelves and Wardrobe Bed Frame. This manual provides essential information for the safe assembly, operation, and maintenance of your new furniture. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Safety Information

• Always follow assembly instructions precisely. Incorrect assembly can lead to instability and injury.
• Ensure all hardware is securely tightened before use. Periodically check and re-tighten as necessary.
• Do not exceed the recommended weight capacity of the bed.
• Keep small parts and packaging materials away from children during assembly.
• Use on a level surface to prevent tipping.

Package Contents

Before assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.

• Murphy Bed Frame components (Pine Wood + MDF)
• Bedside Shelves (3 open shelves)
• Wardrobe section with hanging rod
• Large pullable storage drawer
• All necessary assembly hardware (screws, bolts, connectors, etc.)
• Assembly Instruction Guide

Setup and Assembly Instructions

This Murphy bed requires assembly. A detailed, step-by-step assembly instruction guide is included in your package. Please refer to that guide for specific instructions, diagrams, and hardware identification. Ensure you have adequate space and the necessary tools (typically a screwdriver and possibly a hammer) before beginning.

General Assembly Tips:

• Unpack all components and lay them out on a clean, soft surface to prevent scratches.
• Identify all parts and hardware using the provided list in the separate assembly guide.
• Follow the numerical or alphabetical sequence of steps in the assembly guide.
• Do not overtighten screws initially; tighten them fully once the section is assembled.
• It is recommended to have two adults for assembly due to the size and weight of some components.

Operating Instructions

The Flieks Murphy Bed is designed for easy transformation between a compact cabinet and a comfortable bed, offering versatile use of space.

To Open the Bed:

1. Ensure the area in front of the cabinet is clear of obstructions.
2. Locate the handles on the front panel of the cabinet.
3. Gently pull the front panel outwards and downwards. The bed frame will pivot out from the cabinet.
4. As the bed lowers, the support legs will automatically extend. Ensure they are fully extended and stable on the floor.
5. Once fully extended, the bed is ready for use.

To Close the Bed:

1. Remove all bedding and pillows from the bed frame.
2. Lift the bed frame upwards, guiding it back into the cabinet. The support legs will retract automatically.
3. Push the front panel firmly until it is flush with the cabinet and securely latched.
4. Ensure the bed is fully closed and stable before using the cabinet features.

Using Storage Features:

• Wardrobe: Utilize the hanging rod for clothes. Avoid overloading to ensure smooth operation of the bed mechanism.
• Bedside Shelves: The three open shelves are suitable for books, decorative items, or small personal belongings.
• Storage Drawer: The large pullable drawer provides additional concealed storage for various items.

Maintenance

Proper care will extend the life and appearance of your Flieks Murphy Bed.

• Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, which can damage the finish.
• Hardware: Periodically check all screws and bolts to ensure they remain tight. Re-tighten as needed to maintain stability.
• Mechanism: Keep the folding mechanism free of dust and debris. Do not lubricate unless specifically instructed by the manufacturer.
• Sunlight: Avoid prolonged exposure to direct sunlight to prevent fading or warping of the wood.

Troubleshooting

If you encounter any issues with your Murphy bed, please refer to the following common solutions:

• Bed does not open/close smoothly: Ensure no items are obstructing the mechanism. Check that all assembly hardware is correctly installed and tightened.
• Bed feels unstable: Verify that the bed is placed on a level surface. Check and tighten all connection points and hardware. Ensure support legs are fully extended when the bed is open.
• Drawer sticks: Check for any obstructions in the drawer slides. Ensure the drawer is correctly aligned on its runners.

For issues not covered here, please contact Flieks customer support.

Specifications

Warranty and Support

For warranty information or customer support, please refer to the documentation included with your purchase or contact Flieks directly through their official website or customer service channels. Please have your model number (GX000733AAK-MZJ) and purchase date available when contacting support.