User Manual: BYTECH TWS Earbuds

Introduction

Thank you for choosing the BYTECH TWS Earbuds. This manual provides essential information for setting up, operating, and maintaining your new wireless earbuds. Please read this manual carefully before use to ensure optimal performance and longevity of your device.

These earbuds feature advanced Bluetooth 5.3 technology and True Wireless Stereo (TWS) connectivity, offering a seamless audio experience.

What's in the Box?

• BYTECH TWS Earbuds (Left and Right)
• Wireless Charging Case
• User Manual (this document)
• (Note: Charging cable may be included but not explicitly listed in product specifications. Please check packaging.)

Product Overview

Figure 1: The BYTECH TWS Earbuds in their open wireless charging case. The case features a digital display indicating the battery level, and the earbuds are white with a sleek design. The case also shows subtle color gradients, possibly from an LED indicator.

Figure 2: Retail packaging for the BYTECH Orbit True Wireless Earbuds. The box highlights key features such as Bluetooth connectivity, touch control, 20+ hours of play, auto pairing, and compatibility with Siri and Google Assistant.

Setup

1. Charging the Earbuds and Case

Before first use, fully charge the earbuds and the charging case. Place the earbuds into the charging case. The case is equipped with wireless charging capability. Connect the charging case to a power source using a compatible charging cable (not explicitly listed as included, please check your package) or place it on a wireless charging pad.

• The digital display on the charging case will indicate the battery level.
• Ensure the earbuds are properly seated in their slots for charging.

2. Pairing with Your Device (Bluetooth)

1. Ensure the earbuds are charged.
2. Open the charging case. The earbuds will automatically enter pairing mode (indicated by flashing lights on the earbuds, if applicable).
3. On your smartphone or Bluetooth-enabled device, go to the Bluetooth settings.
4. Turn on Bluetooth.
5. Search for new devices. You should see "BYTECH BC-AU-BE-146-WT" or a similar name appear in the list of available devices.
6. Select the device name to connect. Once connected, a voice prompt will confirm the successful pairing, and the indicator lights on the earbuds will stop flashing.
7. For subsequent uses, the earbuds will automatically connect to the last paired device when taken out of the case, provided Bluetooth is enabled on your device.

These earbuds support True Wireless Stereo (TWS) connectivity, meaning both earbuds connect to each other wirelessly to provide a stereo sound experience.

Operating the Earbuds

The BYTECH TWS Earbuds feature intuitive touch controls for various functions. While specific touch gestures are not detailed in the product description, common functions typically include:

• Play/Pause: Single tap on either earbud.
• Next Track: Double tap on the right earbud.
• Previous Track: Double tap on the left earbud.
• Answer/End Call: Single tap on either earbud during an incoming call.
• Reject Call: Press and hold either earbud for 2 seconds during an incoming call.
• Activate Voice Assistant: Triple tap or press and hold (check specific model behavior) to activate Siri (for iOS devices) or Google Assistant (for Android devices).
• Volume Control: Some models allow volume adjustment via touch (e.g., tap and hold left for volume down, right for volume up). If not, adjust volume directly on your connected device.

Please refer to the quick start guide included in your packaging for precise touch control instructions specific to your BC-AU-BE-146-WT model.

Maintenance

Proper maintenance ensures the longevity and optimal performance of your earbuds.

• Cleaning: Regularly clean the earbuds and charging case with a soft, dry, lint-free cloth. Do not use abrasive cleaners, alcohol, or chemical solvents. Gently remove any earwax or debris from the earbud tips and speaker mesh using a small, soft brush or cotton swab.
• Storage: When not in use, always store the earbuds in their charging case to protect them from dust, dirt, and physical damage. Store the case in a cool, dry place away from direct sunlight and extreme temperatures.
• Battery Care: To preserve battery life, avoid fully discharging the earbuds and case frequently. Charge them regularly, even if not used for extended periods.
• Water Resistance: These earbuds are not specified as water-resistant. Avoid exposure to water, sweat, and high humidity to prevent damage.

Troubleshooting

If you encounter issues with your BYTECH TWS Earbuds, try the following solutions:

• Earbuds not pairing with device:
  • Ensure earbuds are charged and out of the case.
  • Turn off and on Bluetooth on your device.
  • Forget the device ("BYTECH BC-AU-BE-146-WT") from your device's Bluetooth settings and try pairing again.
  • Ensure no other devices are connected to the earbuds.
• Only one earbud working:
  • Place both earbuds back into the charging case, close the lid, wait a few seconds, then take them out again.
  • Ensure both earbuds are charged.
  • Try resetting the earbuds (refer to quick start guide for specific reset procedure).
• No sound or low volume:
  • Check the volume level on both your connected device and the earbuds.
  • Ensure the earbuds are properly seated in your ears.
  • Clean any debris from the earbud speaker mesh.
• Charging issues:
  • Ensure the charging cable (if used) is securely connected and functional.
  • If using wireless charging, ensure the case is correctly placed on the charging pad.
  • Check for any debris in the charging port of the case.

If problems persist, please contact customer support.

Specifications

Warranty and Support

For warranty information and customer support, please refer to the documentation included with your product packaging or visit the official BYTECH website. Warranty terms and conditions may vary by region and retailer.

Keep your proof of purchase for any warranty claims.