Introduction
This user manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your InFocus IN114A DLP Projector. Please read this manual thoroughly before using the projector to ensure proper functionality and to maximize its lifespan. Keep this manual for future reference.
Important Safety Information
- Do not block ventilation openings. Ensure adequate airflow around the projector.
- Do not look directly into the projector lens when the lamp is on. The bright light can damage your eyes.
- Avoid placing the projector in direct sunlight, near heat sources, or in environments with high humidity or excessive dust.
- Use only the power cord supplied with the projector.
- Unplug the projector from the power outlet before cleaning or when not in use for extended periods.
- Refer all servicing to qualified service personnel.
Package Contents
Please check that all items are present and in good condition:
- InFocus IN114A DLP Projector
- Power Cord
- VGA Cable
- Remote Control (with batteries)
- User Manual (this document)
Product Overview
Figure 1: Front-side view of the InFocus IN114A DLP Projector, showing the lens and control panel.
This image displays the InFocus IN114A DLP Projector from a front-side angle, highlighting its compact black casing. The projector lens is prominently visible on the front, emitting a bright light, indicating its operational state. The top surface features subtle ventilation grilles and branding. This view provides a general understanding of the projector's design and primary light output.
Figure 2: Front view of the InFocus IN114A DLP Projector, focusing on the lens.
This image provides a direct front view of the InFocus IN114A DLP Projector, with a clear focus on the central projection lens. The lens is dark and circular, surrounded by the projector's black casing. A small, circular button or sensor is visible below the lens. This perspective emphasizes the primary component responsible for image projection.
Figure 3: Rear view of the InFocus IN114A DLP Projector, detailing the input/output ports.
This image shows the rear panel of the InFocus IN114A DLP Projector, clearly displaying its array of input and output ports. From left to right, ports include S-VIDEO, AUDIO 1 (L/R), AUDIO 2, VIDEO, COMPUTER 1 (VGA), MONITOR OUT (VGA), HDMI, RS-232, and USB-B. A power input socket is located at the bottom left. Various logos such as InFocus, DLP, and HDMI are also visible, indicating connectivity and technology features.
Key Features:
- XGA (1024 x 768) Resolution: Provides clear and sharp images.
- 3000 Lumens Brightness: Ensures vibrant projections in various lighting conditions.
- 15,000:1 Contrast Ratio: Delivers deep blacks and bright whites for enhanced image quality.
- Long Lamp Life: Up to 10,000 hours, reducing total cost of ownership.
- Multiple Connectivity Options: HDMI, VGA, Composite, S-video inputs for versatile device connection.
- 3D Ready: Compatible with 3D content from Blu-ray, PCs, and cable boxes.
Setup Guide
1. Placement
Place the projector on a stable, flat surface or mount it securely to a ceiling. Ensure the projector is positioned perpendicular to the projection screen or wall for optimal image geometry. Allow sufficient space around the projector for ventilation.
2. Connecting Power
- Connect the supplied power cord to the projector's power inlet (refer to Figure 3).
- Plug the other end of the power cord into a grounded electrical outlet.
3. Connecting Video Sources
The InFocus IN114A offers various input options:
- HDMI: For high-definition digital video and audio. Connect an HDMI cable from your source device (e.g., Blu-ray player, laptop) to the HDMI port on the projector.
- VGA (Computer 1/2): For analog video from computers. Connect a VGA cable from your computer's VGA output to either the COMPUTER 1 or COMPUTER 2 port.
- Composite Video: For standard definition video. Connect a composite video cable (yellow RCA) to the VIDEO port.
- S-Video: For enhanced standard definition video. Connect an S-video cable to the S-VIDEO port.
4. Connecting Audio Sources
If your video source does not transmit audio via HDMI, or if you prefer separate audio, use the audio input ports:
- Connect audio cables (red/white RCA or 3.5mm jack) from your source device to the AUDIO 1 or AUDIO 2 ports on the projector.
- The projector has an internal speaker, but for better audio quality, connect the AUDIO OUT port to an external sound system.
Operating Instructions
1. Powering On/Off
- Power On: Press the Power button on the projector's control panel or the remote control. The power indicator light will turn steady blue.
- Power Off: Press the Power button twice. The projector will enter a cooling down cycle, and the power indicator will flash. Do not unplug the projector until the fan stops and the indicator light turns off.
2. Selecting Input Source
Press the "Source" or "Input" button on the projector or remote control repeatedly to cycle through available input sources (HDMI, VGA, Video, S-Video) until your desired source is displayed.
3. Adjusting Image
- Focus: Rotate the focus ring on the projector lens until the image is sharp and clear.
- Zoom: Rotate the zoom ring on the projector lens to adjust the image size without moving the projector.
- Keystone Correction: If the image appears trapezoidal, use the "Keystone" function in the projector's OSD (On-Screen Display) menu to correct it.
- Brightness/Contrast/Color: Access the OSD menu to fine-tune image settings for optimal viewing.
4. OSD Menu Navigation
Use the arrow buttons and "Menu" / "Enter" buttons on the projector or remote control to navigate the On-Screen Display menu for advanced settings and adjustments.
Maintenance
1. Cleaning the Projector
- Casing: Wipe the projector casing with a soft, dry, lint-free cloth. Do not use abrasive cleaners or solvents.
- Lens: Use a professional lens cleaning kit (blower brush, lens cleaning fluid, microfiber cloth) to gently clean the lens. Avoid touching the lens surface with your fingers.
- Ventilation Openings: Periodically use a soft brush or compressed air to clear dust from the ventilation openings to ensure proper airflow.
2. Lamp Replacement
The projector lamp has a finite lifespan (up to 10,000 hours). When the lamp life is nearing its end, a warning message may appear, or the image brightness may significantly decrease. Refer to the projector's full service manual for detailed lamp replacement instructions. Always use genuine InFocus replacement lamps.
3. Air Filter Cleaning/Replacement
Some projector models include an air filter that requires regular cleaning or replacement to prevent dust buildup and maintain cooling efficiency. Consult your projector's specific documentation for air filter location and maintenance procedures.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No image on screen | Projector not powered on; Incorrect input source selected; Loose video cable connection. | Ensure power cord is securely connected and projector is on. Press "Source" button to select correct input. Check video cable connections (HDMI, VGA). |
| Image is blurry | Lens out of focus; Projector too close/far from screen. | Adjust the focus ring on the lens. Adjust the zoom ring or move the projector to an appropriate distance. |
| Image is trapezoidal | Projector not perpendicular to screen. | Use the Keystone correction function in the OSD menu. Reposition the projector if necessary. |
| No audio | Volume too low; Incorrect audio input selected; Audio cable not connected. | Increase volume. Ensure audio cables are connected correctly. If using HDMI, check source device audio settings. |
| Projector overheats and shuts down | Blocked ventilation; Dusty air filter. | Ensure ventilation openings are clear. Clean or replace air filter if applicable. Allow projector to cool down before restarting. |
Specifications
| Feature | Detail |
|---|---|
| Brand | InFocus |
| Model | IN114A |
| Display Technology | DLP |
| Native Resolution | XGA (1024 x 768) |
| Brightness | 3000 Lumens |
| Contrast Ratio | 15,000:1 |
| Lamp Life | Up to 10,000 hours |
| Connectivity | HDMI, VGA, Composite, S-Video, RS-232, USB-B |
| Special Features | 3D-Ready, Energy Star compliant |
| Item Weight | 5.29 pounds |
| Product Dimensions | 14.5 x 12.1 x 8.3 inches |
Warranty and Support
As an Amazon Renewed product, this InFocus IN114A DLP Projector is backed by the Amazon Renewed Guarantee. Please refer to the Amazon Renewed product page or your purchase documentation for specific warranty details and return policies.
For technical support or further assistance, please visit the official InFocus support website or contact their customer service. Keep your purchase receipt and product serial number handy when seeking support.
