ZEBRONICS ZEB-PODS K2

ZEBRONICS PODS K2 Wireless Earbuds User Manual

Model: ZEB-PODS K2

1. Introduction

The ZEBRONICS PODS K2 are in-ear wireless earbuds designed to provide a superior audio experience for music, gaming, and calls. They feature Bluetooth v5.4 for stable connectivity, 10mm drivers for clear sound, and Quad Microphones with Environmental Noise Cancellation (ENC) for clear conversations. The earbuds offer dual EQ modes, a dedicated gaming mode, rapid charging, and touch controls for convenient operation.

2. Package Contents

  • ZEBRONICS PODS K2 Earbuds (2 units)
  • Wireless Charging Case
  • USB Type-C Charging Cable
  • QR Code Guide (1 unit)

3. Product Overview

Familiarize yourself with the components of your ZEB-Pods K2 earbuds.

ZEBRONICS PODS K2 Wireless Earbuds and Charging Case

Image 1: ZEBRONICS PODS K2 Wireless Earbuds and Charging Case. The image displays the white earbuds placed inside their charging case, which features a digital battery indicator.

ZEBRONICS PODS K2 Features: 10mm Drivers, BTv5.4, Flash Connect, Splash Proof

Image 2: Key features of the ZEB-Pods K2. This image highlights the 10mm audio drivers, Bluetooth v5.4 connectivity, Flash Connect for quick pairing, and splash-proof design, with an earbud shown in use and the charging case near water droplets.

4. Setup

4.1. Charging the Earbuds and Case

Before first use, fully charge the earbuds and the charging case.

  • Connect the provided USB Type-C cable to the charging port on the case and to a compatible USB power source.
  • The LED battery indicator on the charging case will show the charging status.
  • Place the earbuds into the charging case to charge them. The case will charge the earbuds automatically.
  • A 10-minute rapid charge provides approximately 120 minutes of playback.
ZEBRONICS PODS K2 Type-C Charging and Rapid Charging

Image 3: Charging the ZEB-Pods K2. This image illustrates the Type-C charging port on the case and highlights the rapid charging capability, showing earbuds charging in the case.

4.2. Bluetooth Pairing (Flash Connect)

The ZEB-Pods K2 feature Flash Connect for automatic and effortless reconnection.

  1. Open the charging case. The earbuds will automatically enter pairing mode.
  2. On your device (smartphone, tablet, etc.), enable Bluetooth.
  3. Search for "ZEB-PODS K2" in the list of available Bluetooth devices.
  4. Select "ZEB-PODS K2" to connect. Once paired, the earbuds will automatically connect to the last paired device when removed from the case.

5. Operating Instructions

5.1. Power On/Off

  • Power On: Open the charging case, and the earbuds will power on automatically.
  • Power Off: Place the earbuds back into the charging case and close the lid. They will power off automatically.

5.2. Touch Controls

The earbuds feature intuitive touch controls for managing various functions.

ZEBRONICS PODS K2 Touch Control and Gaming/Music Mode

Image 4: Touch controls and mode switching. This image shows a person interacting with the earbud via touch, and another person using the earbuds while gaming, illustrating the touch control and gaming/music mode features.

ActionFunction
Single TapPlay/Pause music, Answer/End call
Double Tap (Left Earbud)Previous Track
Double Tap (Right Earbud)Next Track
Triple Tap (Left Earbud)Volume Down
Triple Tap (Right Earbud)Volume Up
Long Press (2 seconds)Reject Call, Activate Voice Assistant

5.3. Dual EQ Modes

The ZEB-Pods K2 offer two Equalizer (EQ) modes to optimize your listening experience.

  • Switch between EQ modes to toggle between a balanced sound profile and a bass-heavy 'sound monster' mode.
  • Refer to the QR Code Guide for specific instructions on how to switch between these modes using touch controls.
ZEBRONICS PODS K2 Dual EQ Modes

Image 5: Dual EQ Modes. This image shows a smartphone displaying a music player with an equalizer graphic, alongside the earbuds and charging case, illustrating the dual EQ mode feature.

5.4. Gaming Mode

Optimize your audio for gaming with the low latency gaming mode.

  • Easily switch between Gaming Mode for reduced audio latency and Music Mode for a balanced sound.
  • Refer to the QR Code Guide for specific instructions on how to activate Gaming Mode.

5.5. Voice Assistant Support

Access your device's voice assistant directly from the earbuds.

  • Long press the touch control (typically 2 seconds) to activate Siri or Google Assistant.
ZEBRONICS PODS K2 Quad Mic with ENC

Image 6: Quad Mic with ENC. This image shows a person using the earbuds while on a call, emphasizing the clear call quality provided by the Quad Microphones with Environmental Noise Cancellation.

6. Maintenance

  • Clean the earbuds and charging case regularly with a soft, dry cloth.
  • Avoid using harsh chemicals or abrasive materials.
  • The earbuds are splash-proof; however, avoid submerging them in water.
  • Store the earbuds in their charging case when not in use to protect them and maintain battery life.

7. Troubleshooting

ProblemPossible Solution
Earbuds not pairingEnsure earbuds are charged. Turn off and on Bluetooth on your device. Forget the device in Bluetooth settings and re-pair.
No sound from one earbudPlace both earbuds back in the case, close the lid, then reopen. Check device audio balance settings.
Low volumeAdjust volume on both earbuds and your connected device. Ensure earbuds are properly seated in your ears.
Charging issuesCheck the charging cable and adapter. Ensure the charging contacts on the earbuds and case are clean.

8. Specifications

FeatureDetail
Model NameZEB-PODS K2
Connectivity TechnologyWireless (Bluetooth v5.4)
Audio Driver Size10mm
Noise ControlEnvironmental Noise Cancellation (ENC)
MicrophonesQuad Mic
Battery LifeUp to 40 hours (at 50% volume)
Rapid Charging10 minutes charge for 120 minutes use
Charging PortType-C
Control MethodTouch
Water Resistance LevelWater Resistant (Splash-proof)
Item Weight32 Grams
Product Dimensions5 x 6 x 2.9 cm

9. Official Product Video

Watch this video for a visual overview of the ZEBRONICS PODS K2 Wireless Earbuds and their features.

Video 1: ZEBRONICS PODS K2 promotional video showcasing the earbuds' design, features, and different color options (white and black). It highlights the convenience and audio quality for daily use.

10. Warranty and Support

For warranty information and customer support, please refer to the QR Code Guide included in your package or visit the official ZEBRONICS website. Keep your purchase receipt for warranty claims.

Related Documents - ZEB-PODS K2

Preview Zebronics ZEB-PODS 131 Wireless Earbuds User Manual
Comprehensive user manual for Zebronics ZEB-PODS 131 Wireless Earbuds, covering features, specifications, pairing, usage, and charging instructions. Includes BT v5.4, ENC, and long battery backup.
Preview Zebronics ZEB-PODS O Wireless Earbuds User Manual
User manual for Zebronics ZEB-PODS O Open-ear Wearable Stereo Earbuds, covering features, specifications, and usage instructions.
Preview Zebronics ZEB-PODS B15 Wireless Earbuds User Manual | Features, Specifications, and Usage Guide
Comprehensive user manual for Zebronics ZEB-PODS B15 wireless earbuds. Find detailed information on features, technical specifications, pairing instructions, usage controls, charging methods, and warranty policy.
Preview Zebronics ZEB-PODS 121 Wireless Earbuds User Manual
User manual for Zebronics ZEB-PODS 121 wireless earbuds. Learn about features, specifications, pairing, usage instructions, and charging for your Bluetooth earbuds.
Preview Zebronics ZEB-PODS O2 Wireless Earbuds User Manual
User manual for Zebronics ZEB-PODS O2 wireless earbuds, covering features, specifications, usage instructions, and charging details.
Preview Zebronics ZEB-PODS 141 Wireless Earbuds User Manual
Comprehensive user manual for Zebronics ZEB-PODS 141 Wireless Earbuds, detailing features, specifications, usage instructions, pairing, functions, and charging information.