COLAMY Convertible Sleeper Chair

Important Safety Information

Please read and understand all instructions before assembly and use. Keep this manual for future reference.

• Maximum Weight Capacity: Do not exceed 300 lbs (136 kg) to ensure stability and prevent damage.
• USB Port: Keep the USB port and connected devices away from liquids and avoid overloading to prevent electrical hazards.
• Ensure all bolts and connections are securely tightened before use.
• Keep small parts away from children during assembly to prevent choking hazards.
• Do not stand on the chair or use it as a step stool.

Product Overview

The COLAMY Convertible Sleeper Chair is a versatile 3-in-1 furniture piece designed for various uses: a single sofa chair, a lounge chair, or a small sofa bed. It features an adjustable backrest, a built-in USB charging port, and a foldable side table for enhanced convenience.

Figure 1: The COLAMY Convertible Sleeper Chair demonstrating its reading, relaxing, and napping configurations.

Product Features

• 3-in-1 Convertible Design: Easily transforms from a sofa chair to a lounge chair or a small sofa bed.
• Adjustable Backrest: Offers 3 positions (105°, 150°, 180°) for customized comfort.
• Built-in USB Port: Conveniently charge electronic devices.
• Foldable Side Table: Provides a handy surface for drinks or books, and folds away when not in use.
• Sturdy Metal Frame: Ensures durability and stability with a 300 lbs weight capacity.
• Removable Pillow: Offers additional neck and head support.
• Soft, Breathable Fabric: Provides comfort for extended use.

Figure 2: Key features including the USB port, foldable table, and fabric texture.

Figure 3: Unique features of the COLAMY Sleeper Chair.

Assembly Instructions

For a visual guide, please refer to the assembly video below. Detailed steps are also provided.

Step-by-Step Assembly

1. Attach Armrest Connections: Attach one Connection Iron M-R to the left side of the Right Armrest C, and two Corner Iron K pieces to the right side of the Right Armrest C. Use four Bolts N and tighten to 50% with Wrench Q, then fully tighten to 100%. Repeat this process for the Left Armrest C. (Note: Armrest C and Connection Iron M are marked 'L' or 'R' for correct placement).
2. Attach Large Connection Irons to Cushion A: Secure two Large Connection Iron P pieces to Cushion A using six Bolts N. Tighten these bolts to 50% with Wrench Q.
3. Connect Cushion A to Armrests: Connect Cushion A to the Right Armrest C using the Large Connection Iron P. Align the screw holes and use three Bolts N, then tighten all bolts to 100% with Wrench Q. Repeat this step to connect Cushion A to the Left Armrest C. This forms the main seat frame.
4. Attach Rear Board E: Attach the Rear Board E to both armrests using Connecting Iron K. Align the screw holes, insert four Bolts N, and tighten them with Wrench Q.
5. Install Legs: Place four Plastic Spacers S onto each Leg J. Then, attach the four Legs J to the bottom of the seat frame by tightening them securely. This completes the main chair body.
6. Assemble Moveable Supports: Attach the Right Moveable Support G to the Right Bracket H using three Bolts N, tightening with Wrench Q. Repeat this for the Left Moveable Support G and Left Bracket H. (Note: Supports G and Brackets H are marked 'L' or 'R').
7. Attach Rungs to Iron Frame: Attach two Rungs I to the assembled iron frame using four Bolts O. Tighten these bolts to 50% with Wrench Q. This forms the iron frame base.
8. Connect Iron Frame Base to Expandable Padding B: Place Expandable Padding B upside down on the ground. Attach the iron frame base to Expandable Padding B using four Bolts N. Tighten these bolts with Wrench Q.
9. Attach Front Board F: Attach the Front Board F to Bracket H, aligning their screw holes. Use four Bolts N and tighten with Wrench Q. Finally, tighten the four Bolts O to 100% with Wrench Q. This completes the padding base.
10. Final Assembly: Push the finished padding base into the finished chair body. Place Pillow D onto the chair. Your multifunctional chair is now successfully assembled.

Figure 4: Visual guide for the easy conversion mechanism.

Operating Instructions

Converting the Chair (3-in-1 Function)

1. Sofa Chair to Lounge Chair: Gently pull the hidden pull-out bed mechanism from beneath the seat. The footrest will extend forward.
2. Lounge Chair to Sofa Bed: Adjust the backrest to a fully flat (180°) position. The extended footrest and flattened backrest create a small sofa bed.
3. Reverting to Sofa Chair: Push the footrest back under the seat and adjust the backrest to an upright position.

Adjusting the Backrest

The backrest can be adjusted to three positions:

• 105°: Ideal for reading or upright seating.
• 150°: Suitable for relaxing or lounging.
• 180°: Fully flat for sleeping.

To adjust, gently push the backrest forward slightly, then recline it to your desired angle. Ensure it locks into place before use.

Using the USB Port

Locate the built-in USB charging port on the side of the armrest. Connect your device's USB cable to the port to charge. Ensure the chair is connected to a power source if required (check product specifications for power requirements).

Using the Foldable Side Table

The side table is integrated into the armrest. To use, gently pull it out and unfold it. To store, fold it back into the armrest until it is flush with the chair's side.

Care and Maintenance

• Cleaning: Wipe clean with a dry cloth. For spills, blot immediately with a clean, dry cloth. Avoid harsh chemicals.
• Pillow Care: The pillow is removable for easier cleaning or adjustment. Follow fabric care instructions for the pillow cover.
• Frame Maintenance: Periodically check all bolts and connections to ensure they remain tight. Retighten as necessary.
• Avoid Direct Sunlight: Prolonged exposure to direct sunlight may cause fabric fading.
• Avoid Sharp Objects: Keep sharp objects away from the fabric to prevent tears or damage.

Troubleshooting

• Chair feels unstable: Check all assembly bolts and ensure they are fully tightened. Verify that the legs are securely attached and evenly placed on the floor.
• Backrest not adjusting smoothly: Ensure no obstructions are behind the backrest. Check the adjustment mechanism for any loose parts or debris.
• USB port not charging: Verify that the chair is properly connected to a power source (if applicable, some USB ports require external power). Try a different USB cable or device to rule out device-specific issues. Ensure the USB port is clean and free of debris.
• Difficulty converting to bed mode: Ensure the area around the chair is clear of obstructions. Gently pull the hidden mechanism with even force. If stiff, check for any misaligned parts or debris in the tracks.

Product Specifications

Figure 5: Product dimensions and weight capacity.

Warranty and Support

COLAMY products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your purchase or contact COLAMY customer support directly.

If you encounter any issues or have questions regarding your product, please contact our customer support team:

• Customer Support: Refer to the contact information provided in your purchase documentation or visit the official COLAMY website.