VELPAX XCB-S10
VELPAX Mini 10L 1500W Instant Electric Water Heater User Manual
Model: XCB-S10
Introduction
This manual provides essential information for the safe and efficient operation of your VELPAX Mini 10L 1500W Instant Electric Water Heater, Model XCB-S10. Please read these instructions thoroughly before installation and use, and retain them for future reference.
Important Safety Information
Failure to follow these safety instructions could result in electric shock, fire, property damage, or personal injury. Always consult a qualified professional for installation and maintenance if you are unsure.
- Ensure the power supply matches the specifications of the water heater (220V, 1500W).
- Do not operate the water heater if it is damaged or malfunctioning.
- Always disconnect power before performing any maintenance or repairs.
- This appliance must be properly grounded.
- Do not block the pressure relief valve.
- Keep flammable materials away from the water heater.
- Protect the unit from freezing temperatures to prevent damage.
- The maximum temperature increase is 70°C. Exercise caution to prevent scalding.
Figure 1: Multiple Safety Protections. The VELPAX Mini Water Heater is equipped with overheat, overpressure, anti-freeze, grounding, waterproof, and corrosion-resistant protections to ensure safe operation.
Product Features
- Instant Hot Water: 1500W heating system provides hot water in seconds without preheating.
- Compact Design: 10L capacity, dimensions 36.8 x 21.8 x 27 cm, suitable for under-sink, wall, or floor mounting.
- Durable Construction: Internal layers of high-temperature calcined and enamel for corrosion and rust resistance. Stainless steel heating tubes and integrated magnesium rods purify water and extend lifespan.
- Energy Efficient: Thermal efficiency up to 90%, providing hot water only as needed.
- Digital Display: Smart LED digital display for effortless temperature adjustment between 30°C and 70°C.
- Multiple Protections: Anti-freeze, overheat, overpressure, grounding, waterproof, and corrosion-resistant protections.
Figure 2: Compact Design and Key Features. The water heater offers space-saving installation, 1500W heating, and energy efficiency.
Setup and Installation
This water heater is designed for easy installation. However, for electrical and plumbing connections, it is recommended to consult a qualified professional to ensure compliance with local codes and safety standards.
Package Contents:
- VELPAX Mini Electric Water Heater (Model XCB-S10)
- Leak protection fitting (1/2 inch NPT)
- Pressure relief valve
- Two 0.9m hoses
Installation Steps:
- Mounting: Choose a suitable location (under-sink, wall, or floor) that is discreet and allows for proper ventilation and access for maintenance. Ensure the surface can support the weight of the unit when full.
- Valve Body Installation: Install the valve body to the unit.
- Cold Water Pipe Connection: Connect the cold water inlet pipe to the designated port on the water heater. Ensure a secure, leak-free connection.
- Hot Water Pipe Fittings Installation: Install the hot water pipe fittings.
- Hot Water Pipe Connection: Connect the hot water outlet pipe to the designated port.
- Pressure Relief Valve Hose Connection: Connect the pressure relief valve hose. This is critical for safety.
- Wastewater Discharge Switch: Ensure the wastewater discharge switch is correctly installed and accessible.
- Electrical Connection: Connect the water heater to a grounded 220V power outlet. Ensure the circuit can handle 1500W. Verify the plug type is compatible with your local outlets.
- Fill the Tank: Before powering on, open a hot water faucet to allow the tank to fill completely and air to escape. Close the faucet once water flows steadily.
Figure 3: Installation Overview. This diagram illustrates the key steps for connecting the water heater to your plumbing system.
Operating Instructions
The VELPAX Mini Water Heater features an intelligent digital touch screen for easy operation.
Digital Display Functions:
- Current Temperature Display: Shows the current water temperature.
- Set Temperature Display: Indicates the desired water temperature.
- Time Display: Shows the current time.
- Heating Mode: Activates the heating function.
- ON/OFF Switch: Powers the unit on or off.
- Up/Down Buttons: Adjust the set temperature (range 30°C to 70°C).
- Set Button: Confirms temperature settings or enters other modes.
- Reservation Heating Time: Allows scheduling of heating cycles.
- Purification of Hot Water: Indicates water purification status (if applicable).
Basic Operation:
- Power On: Press the ON/OFF button to turn on the water heater. The digital display will illuminate.
- Set Temperature: Use the Up and Down buttons to adjust the desired water temperature. The set temperature will be displayed.
- Heating: The unit will automatically begin heating to reach the set temperature. The "Heating" indicator will be visible on the display.
- Power Off: Press the ON/OFF button again to turn off the water heater.
Figure 4: Intelligent Digital Touch Screen. This image details the various indicators and control buttons on the water heater's display panel.
Figure 5: 24-Hour Hot Water Supply. The water heater provides continuous hot water for various daily needs.
Maintenance
Regular maintenance ensures the longevity and efficient operation of your water heater. Always disconnect power before performing any maintenance.
- Cleaning: Wipe the exterior of the unit with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Pressure Relief Valve: Periodically check the pressure relief valve for any blockages or leaks. Test it according to local regulations (usually annually).
- Drainage: If the unit will be unused for an extended period or if there is a risk of freezing, drain the tank completely. Refer to the installation section for wastewater discharge.
- Anode Rod Inspection: The integrated magnesium rods help purify water and prevent corrosion. While designed for long life, consider professional inspection and replacement if water quality issues arise.
Troubleshooting
Before contacting customer support, please refer to the following common issues and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| No hot water / Unit not heating | No power; circuit breaker tripped; unit turned off; thermostat set too low. | Check power connection and circuit breaker. Ensure unit is on and thermostat is set to desired temperature. |
| Water not hot enough | Thermostat set too low; excessive hot water demand; incoming cold water temperature too low. | Increase thermostat setting. Reduce hot water usage. Allow more time for heating. |
| Water leaking from unit | Loose connections; faulty pressure relief valve; tank damage. | Tighten all water connections. Inspect pressure relief valve; replace if faulty. If tank damage is suspected, disconnect power and water supply immediately and contact a professional. |
| Error Code E2 | Indicates a specific internal fault. | Disconnect power, wait a few minutes, then reconnect. If the error persists, contact customer support. |
| Unit trips circuit breaker | Overload on circuit; short circuit within unit. | Ensure the circuit is dedicated and can handle 1500W. If it continues to trip, disconnect and seek professional electrical inspection. |
Specifications
| Parameter | Value |
|---|---|
| Brand | VELPAX |
| Model Number | XCB-S10 |
| Capacity | 10 Liters (2.6 Gallons) |
| Rated Power | 1500W |
| Rated Voltage | 220V |
| Rated Frequency | 50Hz |
| Rated Pressure | 0.7MPa |
| Maximum Temperature | 70°C |
| Efficiency | 90% |
| Waterproof Rating | IPX4 |
| Electrical Category | I Class |
| Product Dimensions (L x H) | 37 cm x 27 cm (14.5 inches x 10.6 inches) |
| Installation Type | Wall-mounted (or floor/shelf) |
| Color | Grey |
Figure 6: Product Parameter Information. Detailed dimensions and electrical specifications of the water heater.
Warranty and Support
VELPAX offers a satisfaction guarantee. If you are not satisfied with your mini water heater, please contact us for a 100% refund or replacement within 3 months of purchase.
For technical support, troubleshooting assistance, or warranty claims, please contact VELPAX customer service through your purchase platform or the official VELPAX website.
Note: The product is designed for specific electrical standards (220V). Ensure compatibility with your local electrical system. Some users have reported concerns regarding CE/UKCA approval; verify local certification requirements before installation to ensure compliance and avoid potential issues with insurance or professional installation services.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.