Arcchio 10023883

Arcchio R7s LED Lamp User Manual

Model: 10023883 | Brand: Arcchio

1. Product Overview

The Arcchio R7s LED Lamp is an energy-efficient lighting solution designed for various indoor applications. It features advanced LED technology for high efficiency and a long lifespan. The transparent design ensures optimal light distribution, creating a pleasant ambiance. This lamp also includes a dim-to-warm function, allowing you to adjust the light color from 3000K to 2200K during dimming for a cozy atmosphere.

Figure 1: Arcchio R7s LED Lamp, showing its transparent casing and internal LED array.

2. Safety Instructions

Always disconnect power before installing, removing, or servicing the lamp.
Ensure the lamp is compatible with your fixture's R7s fitting (117.6 mm) and voltage (230V).
Do not use in enclosed fixtures without adequate ventilation, as this may shorten lamp life.
This lamp is designed for indoor use only (IP20 protection class). Do not expose to moisture or extreme temperatures.
Do not disassemble or modify the lamp. There are no user-serviceable parts inside.
Handle with care to avoid damage to the glass or plastic components.

3. Setup and Installation

Follow these steps to properly install your Arcchio R7s LED Lamp:

Power Off: Before beginning installation, ensure the power supply to the fixture is turned off at the circuit breaker to prevent electrical shock.
Remove Old Lamp: If replacing an existing lamp, carefully remove the old R7s lamp from its fitting. Allow it to cool down if it was recently in use.
Insert New Lamp: Gently insert the Arcchio R7s LED Lamp into the R7s fitting. Ensure both ends of the lamp are securely seated in the contacts. Do not force the lamp into the fitting.
Secure Fixture: Close and secure any covers or protective elements of your lighting fixture, if applicable.
Power On: Restore power to the fixture at the circuit breaker.
Test: Turn on the light switch to confirm the lamp is functioning correctly.

Note: This lamp is designed for a standard R7s 117.6 mm fitting and operates on 230V. Verify your fixture's requirements before installation.

4. Operating Instructions

The Arcchio R7s LED Lamp operates like a standard light bulb once installed. It offers a dim-to-warm feature for adjustable ambiance.

Turning On/Off: Use your existing light switch to turn the lamp on or off.
Dimming and Dim-to-Warm: If connected to a compatible dimmer switch, you can adjust the brightness of the lamp. As the lamp is dimmed, its color temperature will automatically shift from 3000 Kelvin (warm white) to 2200 Kelvin, providing a warmer, cozier light. Ensure your dimmer switch is compatible with LED lamps.

5. Maintenance and Care

The Arcchio R7s LED Lamp requires minimal maintenance due to its long lifespan and durable construction.

Cleaning: Ensure the lamp is cool and the power is off before cleaning. Wipe the lamp gently with a soft, dry, lint-free cloth. Do not use liquid cleaners, abrasive materials, or solvents, as these can damage the lamp's surface or internal components.
Replacement: When the lamp reaches the end of its lifespan, replace it with another Arcchio R7s LED Lamp (Model 10023883) or a compatible R7s 117.6 mm LED lamp. Follow the installation steps outlined in Section 3.
Storage: If storing the lamp, keep it in its original packaging in a cool, dry place away from direct sunlight and extreme temperatures.

6. Troubleshooting

If you encounter issues with your Arcchio R7s LED Lamp, refer to the following common problems and solutions:

Problem	Possible Cause	Solution
Lamp does not light up.	No power to the fixture. Lamp not properly seated. Lamp is faulty. Fixture is faulty.	Check circuit breaker and light switch. Ensure lamp is fully inserted into the R7s fitting. Test with a known working lamp or in another fixture. Consult a qualified electrician if the fixture is suspected to be faulty.
Lamp flickers or dims unexpectedly.	Incompatible dimmer switch. Loose connection. Voltage fluctuations.	Ensure dimmer is LED-compatible. Check lamp seating in the fixture. Consult an electrician if voltage issues are suspected.
Light color is not as expected.	Dim-to-warm feature active. Incorrect lamp type.	Increase brightness to achieve 3000K warm white. Verify you have the correct Arcchio R7s LED Lamp.

If the problem persists after trying these solutions, please contact Arcchio customer support.

7. Product Specifications

Feature	Specification
Model Number	10023883
Brand	Arcchio
Fitting Type	R7s (117.6 mm)
Wattage	17 Watts
Voltage	230 Volts
Luminous Flux (Brightness)	2100 Lumens
Color Temperature	3000 Kelvin (Warm White) to 2200 Kelvin (Dim-to-Warm)
Material	Plastic, Ceramic
Product Dimensions (L x W x H)	11.8 x 2.9 x 2.9 cm
Weight	80 g
Protection Class	IP20 (Indoor Use Only)
Safety Class	II

Product Data Sheet for Arcchio R7s LED Lamp

Figure 2: Product Data Sheet, providing detailed technical specifications for the lamp.

Figure 3: EU Energy Label for the Arcchio R7s LED Lamp, showing its energy efficiency class E and energy consumption of 17 kWh/1000h. More details can be found at eprel.ec.europa.eu/qr/1891703.

8. Warranty and Support

Arcchio products are designed for quality and durability. If you have any questions regarding your Arcchio R7s LED Lamp or require technical assistance, please contact Arcchio customer support through your retailer or the official Arcchio website.

For general inquiries or support, you may refer to the contact information provided by your seller, Lampen24NL, on Amazon.

Note: Specific warranty terms and conditions may vary by region and retailer. Please retain your proof of purchase for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.