GuliKit KK2 T Wireless Game Controller Instruction Manual

Introduction

The GuliKit KK2 T Wireless Game Controller is a versatile and high-performance peripheral designed for an enhanced gaming experience across multiple platforms. Featuring advanced anti-drift TMR magnetic joysticks, six-axis gyroscope, and Auto-Pilot Gaming (APG) functionality, this controller offers precision, durability, and customizable settings for both casual and competitive players. It is compatible with Windows, PC, Switch, Switch OLED, Switch Lite, Steam Deck, Android, and iOS/macOS systems.

Key Features

Multi-Platform Compatibility

The GuliKit KK2 T controller supports a wide range of devices, including Windows, PC, Nintendo Switch (including OLED and Lite models), Steam Deck, Android phones, and iOS/macOS systems. It offers both wired and wireless (Bluetooth) connection options for flexible gameplay. Please note that Switch 2 wake-up is not supported.

Image: GuliKit KK2 T controller highlighting its compatibility with various operating systems and gaming platforms.

Electromagnetic TMR Thumbsticks

Equipped with new TMR (Tunnel Magnetoresistance) joystick technology, these thumbsticks provide exceptional anti-drift durability, high precision, strong responsiveness, good temperature stability, and low power consumption. This technology ensures a longer lifespan and a superior gaming experience compared to traditional joysticks.

Image: Detailed view of the TMR electromagnetic joystick, emphasizing its anti-drift and high-precision capabilities.

Wired and Wireless Connectivity

Enjoy gaming without limitations. The controller supports up to 10 meters of Bluetooth wireless connection. For PC gaming, a 1000Hz polling rate wired connection ensures faster response times and minimal delay, providing a competitive edge.

Image: The GuliKit KK2 T controller connected via USB-C cable for wired PC gaming and indicating Bluetooth wireless capability.

Gyro Motion and Customizable Settings

Experience immersive motion sense control on Switch with the built-in six-axis gyroscope. The patented motion aim assist function aids in faster aiming for PC FPS games. Quick settings allow on-the-fly adjustments for stick sensitivity, vibration, Turbo function, 8-way/4-way D-Pad, Auto-Pilot Gaming, and button layout swap. NFC Amiibo support and Switch Wake-up functionality are also included.

Image: A user holding the GuliKit KK2 T controller, illustrating the six-axis gyroscope for immersive motion control in games.

Image: The GuliKit KK2 T controller with an Amiibo figure, indicating support for NFC Amiibo and Switch Wake-up features.

Auto-Pilot Gaming (APG)

The innovative APG feature allows you to record any series of inputs up to 10 minutes and map them to the APG button. This enables custom commands or macros for auto-replay, providing hands-free gaming for repetitive tasks or complex sequences.

Image: A detailed view of the GuliKit KK2 T controller's buttons, emphasizing the APG feature for recording and replaying inputs.

Hall Effect Triggers

The controller features Hall Effect Triggers, known for their high precision and long lifespan, ensuring consistent and reliable input during intense gaming sessions.

Image: A close-up of the Hall Effect Triggers on the GuliKit KK2 T controller, highlighting their precision and durability.

Long Battery Life

With optimized power management, the controller's battery can last for up to 25 hours with Turbo settings enabled, providing extended gameplay without frequent recharging.

Image: An icon representing the 950mAh battery capacity of the GuliKit KK2 T controller.

Adjustable D-pad

The D-pad supports changing from a default 8-direction mode to a 4-direction mode, which helps to avoid D-pad ghosting issues in FPS games, providing more precise control.

Image: A diagram illustrating the adjustable D-pad feature of the GuliKit KK2 T controller, allowing mode changes to prevent ghosting.

Setup Guide

1. Charging the Controller: Connect the included USB-C to USB-A cable to the controller's USB-C port and the other end to a compatible USB power source (e.g., computer, wall adapter). The indicator lights on the controller will show charging status.

   Image: The GuliKit KK2 T controller, showing its USB-C port for charging.

2. Power On/Off: Press and hold the GuliKit logo button (center button) to power the controller on or off.
3. Platform Selection: Use the mode switch buttons located on the top edge of the controller to select the desired platform (Switch, Windows, Android, iOS/macOS). The corresponding indicator light will illuminate.

   Image: Top view of the GuliKit KK2 T controller, showing the mode switch buttons for different platforms.

4. Pairing (Wireless):
   • For Nintendo Switch: Go to "Controllers" -> "Change Grip/Order" on your Switch console. Press and hold the sync button on the top of the GuliKit controller until the indicator lights flash rapidly. The controller will pair automatically.
   • For PC/Android/iOS/macOS: Enable Bluetooth on your device. Search for "GuliKit Controller" in the Bluetooth settings and select it to pair.
5. Wired Connection (PC): Connect the USB-C cable from the controller to your PC. The controller will automatically switch to wired mode.

Operating Instructions

• Adjusting Stick Sensitivity: The controller allows for on-the-fly adjustment of joystick sensitivity. Refer to the included quick start guide for specific button combinations to cycle through sensitivity levels.
• Vibration Adjustment: Customize the intensity of the vibration feedback. Consult the quick start guide for instructions on how to change vibration levels.
• Turbo Function: Enable Turbo mode for rapid firing of buttons. This feature is useful in games requiring quick, repeated inputs.
• D-Pad Mode Switching: Switch between 8-way and 4-way D-pad modes to optimize control for different game genres, particularly useful for fighting games or precise platforming.
• Auto-Pilot Gaming (APG): To record an APG sequence, press the dedicated APG button (refer to manual for location) and perform the desired inputs. Press the APG button again to stop recording. To replay, simply press the APG button.
• Button Layout Swap: The controller supports swapping button layouts (e.g., A/B and X/Y) to match different console conventions (e.g., Nintendo vs. Xbox layout). This can be done through quick settings.
• NFC Amiibo Support: For Nintendo Switch, place compatible Amiibo figures on the designated NFC area of the controller to scan them into your games.
• Switch Wake-up: The controller can wake up your Nintendo Switch console from sleep mode, providing convenient access to your games.

Maintenance

• Cleaning: Use a soft, dry cloth to wipe down the controller. Avoid using harsh chemicals or abrasive materials.
• Storage: When not in use, store the controller in its protective case to prevent dust accumulation and physical damage. Avoid exposing it to extreme temperatures or direct sunlight.

  Image: The GuliKit KK2 T controller shown with its included protective case, emphasizing safe storage.

• Battery Care: For optimal battery life, avoid fully discharging the controller frequently. Charge it regularly, even if not in constant use.

Troubleshooting

• Controller Not Connecting/Unresponsive:
  • Ensure the controller is charged.
  • Verify the correct platform mode is selected.
  • Try re-pairing the controller with your device.
  • Perform a factory reset (refer to quick start guide for button combination).
  • Update the controller firmware if available (check GuliKit's official website).
• Joystick Drift: The TMR joysticks are designed to be anti-drift. If you experience drift, ensure the controller firmware is up to date. If the issue persists, contact customer support.
• Buttons Reversed (A/B, X/Y): This is often due to different console button conventions. Use the button layout swap feature in the controller's quick settings to adjust to your preferred layout.
• Amiibo Scanning Issues: Ensure the Amiibo is placed correctly on the NFC touchpoint of the controller. Try repositioning the Amiibo.

Specifications

Warranty and Support

GuliKit offers hassle-free customer support. For any inquiries or assistance, please contact customer support within 24 hours. Refer to the product packaging or GuliKit's official website for specific warranty details and contact information.