1. Introduction
The MiBOXER FUT088 RGB+CCT Full Touch Remote is an advanced wireless controller designed for seamless management of RGB+CCT (Color Changing + Tunable White) lighting systems. This remote provides intuitive control and customization of your lighting environment, allowing for dynamic and personalized ambiance.
It features a sleek, ergonomic design with a responsive full-touch interface, utilizing 2.4GHz RF technology for reliable wireless connectivity up to 30 meters. The FUT088 is compatible with MiBoxer/Mi-Light 2.4G series products, offering control over 16 million colors, brightness, color temperature, and saturation.
2. Product Overview
2.1 Key Features
- 2.4G RF Wireless Transmission: Ensures strong anti-interference and a control distance of up to 30 meters.
- RGB+CCT Control: Full control over 16 million colors, brightness, color temperature (2700K-6500K), and saturation.
- Full-Touch Interface: Responsive touch-sensitive controls for intuitive operation.
- Multi-Zone Compatibility: Can be paired with multiple lights or zones for synchronized or independent control (requires compatible MiBoxer/Mi-Light 2.4G series products).
- Dynamic Lighting Modes: Includes pre-set lighting effects.
- Dimming Support: Flicker-free, stepless dimming for precise light adjustment.
- Delay Off Function: Convenient 60-second or 10-minute delay off options.
2.2 Remote Control Layout
The FUT088 remote features a clear and intuitive layout. Refer to the diagram below for an understanding of each control element.
Figure 1: FUT088 Remote Control Function Diagram. This diagram illustrates the various touch and button controls on the remote, including the Color Ring, Saturation/CCT Control, Dimming Slider, and individual function buttons.
- Color Ring: Touch to select any of 16 million colors.
- Indicator Light: Illuminates to confirm button presses or touch input.
- Saturation / CCT Control: Slide to adjust color saturation or color temperature (Cool White to Warm White).
- Dimming Slider: Slide to adjust brightness from 1% to 100%.
- ON / Link (Unlink): Press to turn lights ON. For linking/unlinking, see Section 3.2.
- W (White): Press to switch to pure white light mode.
- OFF: Press to turn lights OFF.
- R (Red): Press for static red light.
- G (Green): Press for static green light.
- B (Blue): Press for static blue light.
- S- / 60s Delay OFF: In dynamic mode, press to decrease speed. Long press for 60-second delay off.
- M (Mode): Press to cycle through various dynamic lighting modes.
- S+ / 10min Delay OFF: In dynamic mode, press to increase speed. Long press for 10-minute delay off.
3. Setup
3.1 Battery Installation
The FUT088 remote requires 2x AAA batteries (not included). Follow these steps to install them:
- Locate the battery compartment cover on the back of the remote.
- Slide the cover downwards to open the compartment.
- Insert 2x AAA batteries, ensuring the correct polarity (+ and -) as indicated inside the compartment.
- Slide the battery cover back into place until it clicks securely.
Figure 2: FUT088 Remote with included accessories, including the wall mount.
3.2 Linking (Pairing) the Remote with Lights
To control your MiBoxer/Mi-Light 2.4G series products, the remote must be linked to them. This process typically involves the following steps:
- Ensure the light fixture you wish to control is powered off.
- Turn the light fixture ON.
- Within 3 seconds of turning the light ON, press the "ON" button on the FUT088 remote three times.
- The light should flash slowly three times, indicating successful linking.
If the light does not flash, repeat the linking process. Ensure the remote is within range of the light fixture.
3.3 Unlinking (Unpairing) the Remote from Lights
To unlink the remote from a light fixture, follow these steps:
- Ensure the light fixture you wish to unlink is powered off.
- Turn the light fixture ON.
- Within 3 seconds of turning the light ON, press the "ON" button on the FUT088 remote five times.
- The light should flash quickly ten times, indicating successful unlinking.
4. Operating Instructions
Once linked, the FUT088 remote provides comprehensive control over your lighting. Refer to the "Remote Control Layout" in Section 2.2 for button locations.
4.1 Basic Control
- Power ON/OFF: Press the ON button to turn lights on, and the OFF button to turn lights off.
- Brightness Adjustment: Slide your finger along the Dimming Slider to increase or decrease the brightness level.
- Color Selection: Touch the Color Ring to select any desired color from the 16 million available options.
- White Light Mode: Press the W button to switch to pure white light.
- Color Temperature Adjustment: Slide your finger along the Saturation / CCT Control to adjust the color temperature from warm white (2700K) to cool white (6500K) when in white light mode.
- Saturation Adjustment: Slide your finger along the Saturation / CCT Control to adjust the saturation of the selected color.
- Static Colors: Press R for Red, G for Green, and B for Blue.
4.2 Dynamic Modes and Speed Control
- Mode Selection: Press the M button to cycle through various pre-programmed dynamic lighting modes (e.g., color fades, jumps, flashes).
- Speed Adjustment: While in a dynamic mode, press S+ to increase the speed of the effect, and S- to decrease the speed.
4.3 Delay Off Function
The remote includes a convenient delay off feature:
- 60-Second Delay Off: Long press the S- / 60s button. The lights will automatically turn off after 60 seconds.
- 10-Minute Delay Off: Long press the S+ / 10min button. The lights will automatically turn off after 10 minutes.
Figure 3: Delay Off Light Function. This image highlights the buttons used for setting a 60-second or 10-minute delay before the lights turn off.
5. Specifications
| Feature | Detail |
|---|---|
| Model Number | FUT088 |
| Control Type | RGB+CCT (Red, Green, Blue, Tunable White) |
| Signal Frequency | 2.4GHz RF |
| Control Range | Up to 30 meters (98 feet) |
| Color Temperature Range | 2700K - 6500K |
| Power Source | 2x AAA batteries (not included) |
| Dimensions | 5.5 x 2 x 1 inches (approximate) |
| Item Weight | 2.56 ounces |
| Manufacturer | Miboxer |
6. Troubleshooting
- Lights not responding to remote:
- Ensure batteries are correctly installed and not depleted. Replace if necessary.
- Verify the remote is properly linked to the light fixture (refer to Section 3.2).
- Check if the light fixture is powered on and functioning correctly.
- Ensure the remote is within the 30-meter control range and there are no significant obstructions.
- Remote indicator light not illuminating:
- Check battery installation and replace batteries.
- Inconsistent control or flickering lights:
- Interference from other 2.4GHz devices might be present. Try moving the remote or light fixture.
- Ensure the light fixture is compatible with the FUT088 remote.
7. Maintenance
- Cleaning: Wipe the remote with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Storage: Store the remote in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: Remove batteries if the remote will not be used for an extended period to prevent leakage.
8. Warranty and Support
For warranty information and technical support, please refer to the official MiBOXER website or contact your retailer. Keep your purchase receipt as proof of purchase for any warranty claims.
For further assistance, you may visit the MiBOXER Store on Amazon.
