GAEWBBH YKF-826, YKF-826T, YKF-826CH, YKF-830

GAEWBBH 335MM Agitator Stirring Shaft Instruction Manual

Compatible with YKF-826, YKF-826T, YKF-826CH, YKF-830 Ice Cream Machines

1. Introduction

This manual provides essential information for the installation, operation, and maintenance of the GAEWBBH 335MM Agitator Stirring Shaft. This component is designed as a replacement part for specific ice cream machine models, including YKF-826, YKF-826T, YKF-826CH, and YKF-830. Please read these instructions carefully before installation to ensure proper function and longevity of the product.

2. Product Overview

The GAEWBBH 335MM Agitator Stirring Shaft is a crucial component for ice cream machines, responsible for mixing and aerating the ice cream mixture to achieve the desired consistency. It is constructed from durable materials and includes a sealing tube for optimal performance.

  • Length: 33.5 cm (335 mm)
  • Color: Milk white
  • Package Contents: One (1) Agitator Stirring Shaft, One (1) Sealing Tube
  • Compatibility: YKF-826, YKF-826T, YKF-826CH, YKF-830 Ice Cream Machines
GAEWBBH 335MM Agitator Stirring Shaft with dimensions labeled.

This image shows the overall length of the agitator shaft, measuring 335mm, and its maximum width of 85mm.

Close-up of the agitator shaft's drive end, showing 1.4cm dimensions.

A detailed view of the shaft's connection end, indicating a 1.4cm by 1.4cm square drive for secure fitting.

3. Installation Instructions

Before proceeding with installation, ensure your ice cream machine is unplugged from the power source to prevent electrical hazards. This agitator shaft is designed for easy installation as a direct replacement part.

  1. Verify Compatibility: Confirm that your ice cream machine model (YKF-826, YKF-826T, YKF-826CH, or YKF-830) matches the compatible models listed for this agitator shaft.
  2. Power Disconnection: Unplug the ice cream machine from the electrical outlet.
  3. Access the Mixing Chamber: Open the ice cream machine's mixing chamber according to your machine's specific user manual.
  4. Remove Old Shaft: Carefully remove the existing agitator shaft and any associated sealing components. Dispose of the old parts responsibly.
  5. Install Sealing Tube: Place the new sealing tube onto the appropriate part of the new agitator shaft or into the machine's designated slot, ensuring a snug fit to prevent leaks.
  6. Insert New Shaft: Insert the new GAEWBBH 335MM Agitator Stirring Shaft into the mixing chamber, aligning its drive end with the motor coupling. Ensure it seats correctly and rotates freely by hand.
  7. Secure Chamber: Close and secure the mixing chamber door or cover as per your ice cream machine's instructions.
  8. Test: Plug in the machine and perform a brief test run without ingredients to confirm the shaft rotates smoothly and there are no unusual noises.

4. Operating Instructions

Once correctly installed, the agitator stirring shaft operates automatically as an integral part of your ice cream machine. Refer to your ice cream machine's primary user manual for specific operating procedures, including ingredient loading, cycle selection, and machine startup.

Close-up of the spiral design on the agitator shaft.

A detailed shot of the spiral paddle design, which is crucial for effective ice cream mixing.

5. Maintenance

Regular maintenance ensures the longevity and hygienic operation of your agitator stirring shaft.

  • Cleaning: After each use, remove the agitator shaft and sealing tube from the machine. Wash them thoroughly with warm, soapy water. Rinse completely and allow to air dry before reassembly or storage. Ensure no food residue remains.
  • Inspection: Periodically inspect the agitator shaft for any signs of wear, cracks, or damage. Check the sealing tube for tears or hardening, which could lead to leaks. Replace the sealing tube if it shows signs of wear.
  • Storage: Store the clean and dry agitator shaft in a clean, dry place when not in use.

6. Troubleshooting

If you encounter issues with the agitator stirring shaft, refer to the following common problems and solutions:

Problem Possible Cause Solution
Shaft not rotating
  • Improper installation
  • Obstruction in mixing chamber
  • Machine power issue
  • Ensure shaft is correctly seated and aligned with motor coupling.
  • Check for any foreign objects or frozen mixture blocking rotation.
  • Verify machine is plugged in and powered on. Consult machine's manual.
Leaking from mixing chamber
  • Damaged or improperly installed sealing tube
  • Chamber door not properly sealed
  • Inspect sealing tube for damage; replace if necessary. Ensure it is correctly positioned.
  • Refer to your ice cream machine's manual to ensure the chamber door is securely closed.

7. Specifications

  • Product Name: Agitator Stirring Shaft
  • Brand: GAEWBBH
  • Length: 335 mm (33.5 cm)
  • Color: Milk white
  • Item Weight: Approximately 1.76 ounces (50 grams)
  • Package Dimensions: 1.18 x 0.79 x 0.39 inches
  • Compatible Ice Cream Machine Models: YKF-826, YKF-826T, YKF-826CH, YKF-830
  • Manufacturer: vhugbu
  • ASIN: B0DPMQC13X

8. Warranty and Support

For any questions regarding the GAEWBBH 335MM Agitator Stirring Shaft, or if you require technical assistance, please contact the seller or manufacturer directly through the platform where the purchase was made. Please retain your proof of purchase for warranty claims, if applicable. Specific warranty details may vary by seller.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.