Zcargel XIAN133.99-111

Zcargel Android 13 Car Stereo Radio Navigation User Manual

Model: XIAN133.99-111

1. Introduction

Thank you for choosing the Zcargel Android 13 Car Stereo Radio Navigation system. This manual provides detailed instructions for the installation, operation, and maintenance of your new car stereo. Please read this manual thoroughly before use to ensure proper functionality and safety.

2. Safety Information

3. Product Specifications

FeatureDetail
SystemAndroid 13.0
Chipset8227L-DEMO
Screen Size7 inch Touch Screen
Memory2GB (RAM) + 32GB (ROM)
Screen Resolution1024x768
Mirror LinkAndroid/IOS
Power Output4x45W
Bluetooth Version4.0
Radio BandFrequency Modulation/RDS
MapsBuilt-in offline maps
WIFISupport
USB InterfaceDouble USB interface
Supported Audio FormatsAPE/FLAC/WAV/MP3/WMA and more
Supported Video FormatsMKV/RMVB/AVI/MP4/MDV and more
Supported Picture FormatsPNG/JPEG/JPG/GIF/WBMP/BNP and more
LanguagesChinese/English/French/Italian/Korean/Japanese/Arabic/Spanish/Portuguese/Russian/Turkish/Vietnamese/Hebrew/Polish/German

4. Package Contents

Verify that all items are present in the package:

Package contents including car stereo, cables, GPS antenna, and backup camera

Image showing the car stereo unit and all included accessories such as power cables, GPS antenna, AHD backup camera, RCA cables, external microphone, and USB cables.

5. Installation Guide

5.1. Compatibility Check

This car stereo is compatible with various Nissan models. Please ensure your vehicle is listed below before proceeding with installation:

5.2. Wiring Diagram

Refer to the following diagram for proper wiring connections. Ensure all connections are secure before powering on the unit.

Wiring diagram for the car stereo showing various input and output ports

Detailed view of the rear of the car stereo unit, illustrating the various ports and connectors for power, speakers, USB, GPS, RCA input/output, and camera input.

  1. Power Cable: Connect the main power harness to the vehicle's power supply (ACC, B+, GND).
  2. GPS Antenna: Connect the GPS antenna to the dedicated GPS port for navigation functionality. Position the antenna in a location with clear sky view.
  3. AHD Backup Camera: Connect the backup camera to the "CAM IN" RCA port. Ensure the reverse trigger wire is connected to the vehicle's reverse light signal.
  4. RCA Input/Output: Use these ports for external audio/video devices or amplifiers.
  5. USB Cables: Connect the two USB cables for external storage, phone charging, or wired CarPlay/Android Auto.
  6. External Microphone: Connect the external microphone for improved call quality during Bluetooth hands-free operation.
  7. Steering Wheel Control (SWC): Connect the SWC wires to your vehicle's steering wheel control interface (if applicable) to enable control from the steering wheel.

6. Operating Instructions

6.1. Initial Setup

Upon first power-on, the system will guide you through initial setup steps, including language selection and time zone settings. The factory setting keyword is 8888.

Main interface of the car stereo showing various app icons

The main user interface of the car stereo, displaying icons for phone, music, maps, messages, audiobooks, podcasts, and car settings, similar to a smartphone home screen.

6.2. Wireless CarPlay & Android Auto

This unit supports both wireless CarPlay and Android Auto for seamless smartphone integration. You can access navigation, music, calls, and messages directly from the car stereo screen.

  1. Connection: Connect your smartphone via Bluetooth first, then follow the on-screen prompts to establish the CarPlay or Android Auto connection. Wired connection via USB is also supported.
  2. Features: Once connected, your phone's compatible apps will appear on the stereo display, allowing for voice control and touch interaction.
CarPlay, Android Auto, and Mirror Link interfaces

An image demonstrating the user interfaces for Wireless CarPlay, Android Auto, and Mirror Link, showing how smartphone content is displayed on the car stereo screen, along with icons indicating Bluetooth and USB connection options.

6.3. GPS Navigation & WIFI Connectivity

The unit comes with built-in offline maps. For real-time traffic and online navigation, connect the stereo to a Wi-Fi network or mobile hotspot.

  1. WIFI Connection: Go to Settings > Network & Internet > Wi-Fi to connect to an available network.
  2. Navigation: Open the pre-installed navigation app or download your preferred navigation app from the app store.
GPS Navigation and Wi-Fi connectivity features

A visual representation of the GPS navigation interface on the car stereo, showing a map with a route and various app icons for social media and streaming services, indicating Wi-Fi connectivity for online features.

6.4. Bluetooth & FM/RDS Radio

Enjoy hands-free calling and music streaming via Bluetooth, and tune into your favorite radio stations with FM/RDS functionality.

FM/RDS radio and Bluetooth interface

This image displays the FM radio interface with frequency tuning and preset stations, alongside the Bluetooth interface showing music playback controls and phone call options, highlighting the audio features of the car stereo.

6.5. Steering Wheel Control (SWC)

If your vehicle supports SWC, you can configure the stereo to respond to your steering wheel buttons for convenient control.

  1. Learning Function: Navigate to Settings > Steering Learn (or similar) to program the buttons. Follow the on-screen instructions to assign functions to each button.
Steering wheel control settings interface

A visual guide to the steering wheel control setup menu on the car stereo, showing options like brightness, navigation, GPS detection, steering learn, logo settings, and other settings, with an overlay of a steering wheel and control buttons.

7. Maintenance

8. Troubleshooting

ProblemPossible CauseSolution
Unit does not power on.Incorrect wiring; Blown fuse; Power supply issue.Check all power connections (ACC, B+, GND). Verify vehicle fuses and the unit's fuse. Ensure sufficient power supply.
No sound.Volume too low; Mute enabled; Speaker wiring issue.Increase volume. Check if mute is active. Inspect speaker wiring connections.
GPS signal weak or lost.GPS antenna improperly placed or disconnected.Ensure GPS antenna is connected and placed in a location with clear sky view (e.g., dashboard).
Bluetooth connection unstable.Interference; Out of range; Phone issue.Ensure phone is close to the unit. Restart Bluetooth on both devices. Clear paired devices and re-pair.
Backup camera not displaying.Camera wiring incorrect; Reverse trigger not connected.Check camera power and video signal connections. Verify the reverse trigger wire is correctly connected to the vehicle's reverse light.

9. Warranty and Support

Zcargel products come with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included in your package or visit the official Zcargel website.

For technical support, troubleshooting assistance, or inquiries regarding your product, please contact Zcargel customer service through the following channels:

Please have your model number (XIAN133.99-111) and purchase date ready when contacting support.

Related Documents - XIAN133.99-111

Preview Metra 99-7620B Installation Instructions for Nissan Armada and Pathfinder
Install an aftermarket stereo in your Nissan Armada (2013-2015, 2008-2012) or Pathfinder (2008-2012) with the Metra 99-7620B kit. This guide details the installation process, including retaining factory features like the display screen and climate controls.
Preview Metra 99-7627HG Installation Instructions for Nissan Pathfinder 2013-2016
Detailed installation guide for the Metra 99-7627HG dash and wiring kit, designed for 2013-2016 Nissan Pathfinder vehicles without navigation. Includes steps for dash disassembly, kit preparation, assembly, Axxess interface installation, and screen operation.
Preview Metra 99-7627HG Installation Instructions for Nissan Pathfinder (2013-2016)
Detailed installation instructions for the Metra 99-7627HG dash kit, designed for 2013-2016 Nissan Pathfinder vehicles without navigation but with a color screen. It covers kit features, components, required tools, step-by-step dash disassembly, kit preparation, assembly procedures for ISO DIN and ISO DDIN radio provisions, Axxess interface installation, wiring connections for various audio systems (including BOSE), final assembly, and screen operation including settings, camera input, and software updates.
Preview PAC OEM-1 & ROEM-NIS2: Car Stereo & Amplifier Integration Installation Guide
Detailed installation instructions and wiring diagrams for PAC OEM-1 and ROEM-NIS2 interfaces. Enable seamless replacement of factory car stereos and amplifiers in Nissan vehicles with Bose systems, retaining original audio components. Includes wire identification charts and compatibility information.
Preview Metra 99-7614 Installation Instructions for Nissan NV and Quest Dash Kits
Comprehensive installation guide for the Metra 99-7614 dash kit, designed for select 2011-2012 Nissan Quest and 2012-2015 Nissan NV vehicles (without navigation or rear seat entertainment). Covers dash disassembly and kit assembly for single-DIN and double-DIN radios.
Preview Metra Turbo Kits: Vehicle-Specific Dash Kits & Audio Installation Solutions
Discover Metra's comprehensive catalog of Turbo Kits, offering vehicle-specific dash kits, installation accessories, and wiring solutions for seamless car audio upgrades. Find the perfect fit for your vehicle.