Introduction
Thank you for purchasing the EDISHINE LED Floor Lamp, Model HFLAA2A. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your lamp. Please read this manual thoroughly before use and retain it for future reference.
Setup and Assembly
Follow these steps to assemble your EDISHINE LED Floor Lamp:
- Attach the Lamp Head: Carefully screw the lamp head onto the top pole section.
- Assemble the Pole: Connect the pole sections one by one, screwing them clockwise until secure. It is recommended to assemble from the top of the lamp downwards to the base.
- Secure the Base: Attach the assembled pole to the lamp base, ensuring it is firmly tightened. The base is designed with a multi-angle cord outlet for flexible placement.
- Connect the Adapter: Plug the power cable into the lamp's power port and then into a standard electrical outlet.
Image: Step-by-step assembly guide for the EDISHINE LED Floor Lamp, illustrating how to connect the lamp head, pole sections, base, and power adapter.
Operating Instructions
Your EDISHINE LED Floor Lamp offers versatile lighting and charging features:
Adjustable Lighting Angles
The lamp features a highly flexible design for directing light precisely where needed. The light panel can rotate 320° horizontally and 180° vertically. Additionally, the entire lamp pole swivels 350° on its base, allowing for task, accent, or ambient lighting in various settings.
Image: Diagram illustrating the extensive rotation capabilities of the lamp head and the swivel function of the lamp pole.
12W Type-C Fast Charging Port
The lamp includes a built-in 12W USB-C port for fast charging your devices. It supports QC3.0, PD3.0, and other fast-charging protocols. The output specifications are 5V 2.4A, 9V 1.33A, or 12V 1A, providing convenient power for phones, tablets, or e-readers.
Image: A close-up view of the lamp's pole highlighting the Type-C charging port, with a phone connected for charging.
Eye-Care Illumination and Lighting Design
The lamp features an ultra-thin 10-inch full-glowing panel that delivers 1600 lumens of flicker-free light. Its upgraded lighting design incorporates a three-layer light guide system (Diffuse Ray Layer, Light Guide Plate, Reflected Light Layer) to provide soft, glare-free illumination, reducing eye strain during extended use.
Image: Exploded view diagram of the lamp's light panel, illustrating its multi-layered design for optimal light diffusion and eye comfort.
Customizable Light Settings
Adjust the lighting to your preference with multiple settings:
- Brightness: Fully adjustable from 5%, 25%, 50%, 75%, to 100%.
- Color Temperatures: Choose from four distinct color temperatures: 2700K (warm white), 4000K (neutral white), 5000K (cool white), and 6500K (daylight).
- Nightlight Mode: A dedicated 10LM, 2700K nightlight setting provides a soft, warm glow for comfortable low-light environments.
- Timer Function: Set an automatic shut-off timer for 30 or 60 minutes for convenience and energy efficiency.
Image: Visual representation of the lamp's adjustable color temperatures and brightness levels.
Intuitive Touch Controls
Control all lamp functions directly from the integrated touch panel on the lamp pole. This allows for easy adjustment of brightness, color temperature, activation of nightlight mode, and setting timers without needing to bend down.
Maintenance
To ensure the longevity and optimal performance of your EDISHINE LED Floor Lamp, follow these simple maintenance guidelines:
- Cleaning: Disconnect the lamp from the power outlet before cleaning. Use a soft, dry cloth to wipe down the lamp's surfaces. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
- Dust Removal: Regularly dust the light panel and pole to prevent accumulation that could affect light output.
- Inspection: Periodically check the power cord and connections for any signs of damage. If any damage is found, discontinue use and contact customer support.
- LED Lifespan: The integrated LED light source is designed for long-term use and is not user-replaceable.
Troubleshooting
If you encounter any issues with your EDISHINE LED Floor Lamp, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. |
|
|
| Light flickers or is dim. |
|
|
| Type-C charging port not working. |
|
|
| Touch controls are unresponsive. |
|
|
If the problem persists after trying these solutions, please contact EDISHINE customer support.
Product Specifications
| Feature | Detail |
|---|---|
| Model Number | HFLAA2A |
| Brand | EDISHINE |
| Lamp Type | Floor Lamp |
| Light Source Type | LED |
| Wattage | 19 watts |
| Brightness | 1600 Lumens |
| Color Temperatures | 2700K, 4000K, 5000K, 6500K |
| Dimmable | Yes (5%, 25%, 50%, 75%, 100%) |
| Control Method | Touch |
| USB-C Output | 5V 2.4A / 9V 1.33A / 12V 1A (Supports QC3.0, PD3.0) |
| Material Type | Metal |
| Finish Type | Powder Coated |
| Product Dimensions (D x W x H) | 11.81"D x 11.81"W x 70.87"H |
| Item Weight | 9.4 Pounds |
| Indoor/Outdoor Usage | Indoor |
| Included Components | Power Cable, USB Port |
Image: Diagram showing the key dimensions of the EDISHINE LED Floor Lamp.
Warranty Information
The EDISHINE LED Floor Lamp (Model HFLAA2A) comes with a 1-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.
Please retain your proof of purchase for warranty claims.
Customer Support
For any questions, technical assistance, or warranty claims, please contact EDISHINE customer support through the retailer where the product was purchased or visit the official EDISHINE website for contact information.
Website: EDISHINE Official Store