Introduction
Thank you for choosing the Lenyes S881 Wireless Bluetooth Party Speaker. This manual provides detailed instructions for setting up, operating, and maintaining your speaker to ensure optimal performance and longevity. Please read this manual thoroughly before using the product.
Setup Guide
Unpacking
Carefully remove all components from the packaging. Ensure you have the speaker, two wireless microphones, and the charging cable.
Charging the Speaker
Before first use, fully charge the speaker. Connect the charging cable to the speaker's charging port and a suitable power source. The charging indicator will show the charging status.
Battery Charge Time: Approximately 8 hours.
Battery Average Life: Approximately 4 hours (may vary based on usage).
Powering On/Off
To power on the speaker, press and hold the power button until the indicator lights illuminate. To power off, press and hold the power button again.
Operating Instructions
Bluetooth Pairing (Bluetooth V5.3)
- Ensure the speaker is powered on and in Bluetooth pairing mode. The Bluetooth indicator light will typically flash.
- On your device (smartphone, tablet, laptop), enable Bluetooth and search for available devices.
- Select "Lenyes S881" from the list of devices.
- Once paired, the Bluetooth indicator light on the speaker will become solid, and you will hear a confirmation tone.
Bluetooth Range: Up to 10 meters.
Karaoke Function with Wireless Microphones
- Power on the speaker.
- Ensure the two wireless microphones are charged and powered on. They will automatically connect to the speaker.
- Adjust microphone volume and echo effects using the controls on the speaker or the remote control.
Image: The Lenyes S881 speaker shown with its two wireless microphones and remote control, highlighting its karaoke capabilities.
True Wireless Stereo (TWS) Function
The TWS function allows you to pair two Lenyes S881 speakers for an immersive stereo sound experience.
- Ensure both S881 speakers are powered on and not connected to any Bluetooth device.
- On one speaker (this will be the primary speaker), press the TWS button. The speaker will enter TWS pairing mode.
- The two speakers will automatically connect to each other. A confirmation tone will sound once connected.
- Connect your Bluetooth device to the primary speaker as described in the "Bluetooth Pairing" section. Audio will now play through both speakers in stereo.
Image: Two Lenyes S881 speakers demonstrating the True Wireless Stereo (TWS) connection for enhanced sound.
RGB LED Lights
The speaker features dynamic RGB LED lights that can sync with your music or display various lighting effects.
- Press the dedicated RGB light button on the speaker or remote to cycle through different lighting modes (e.g., monochrome gradient, streamer, monochrome conversion).
- The RGB indicator light on the panel provides a visual cue, indicating the current volume percentage when adjusting sound effects.
Image: The Lenyes S881 speaker showcasing its diverse RGB lighting effects, including monochrome gradient, streamer, and monochrome conversion.
Multiple Connectivity Options
The S881 speaker supports various input methods for versatile audio playback:
- USB Input: Insert a USB flash drive containing MP3 audio files into the USB port. The speaker will automatically begin playback.
- TF Card Input: Insert a TF (microSD) card with audio files into the TF card slot. The speaker will detect and play the files.
- AUX Input: Connect an external audio device (e.g., smartphone, MP3 player) using a 3.5mm AUX cable to the AUX port.
- FM Radio: Switch to FM radio mode. Use the controls to scan and select radio stations.
Image: A detailed view of the Lenyes S881 speaker's versatile input options, including MIC, Type-C, TF card, USB, and AUX ports.
Remote Control Operation
The included wireless remote control provides convenient access to various functions, including power, volume, track control, mode selection, and RGB light settings.
Maintenance
Cleaning
Wipe the speaker with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure all ports are free from dust and debris.
Water Resistance (IPX4)
The Lenyes S881 is IPX4 water-resistant, meaning it is protected against splashing water from any direction. It is suitable for outdoor use in light rain or near splashes. Do not submerge the speaker in water.
Image: The Lenyes S881 speaker shown with water splashing on it, illustrating its IPX4 water-resistant design.
Troubleshooting
- No Power:
- Ensure the speaker is fully charged. Connect the charging cable and allow it to charge for at least 30 minutes before attempting to power on again.
- No Sound:
- Check the volume levels on both the speaker and your connected device. Ensure the correct input mode (Bluetooth, AUX, USB, TF) is selected. Verify that the device is properly paired via Bluetooth or connected via cable.
- Bluetooth Pairing Issues:
- Make sure the speaker is in pairing mode. Disable and re-enable Bluetooth on your device. Move your device closer to the speaker. Clear previous Bluetooth connections on your device and try pairing again.
- Microphone Not Working:
- Ensure the microphones are powered on and have sufficient battery. Check microphone volume settings on the speaker.
- TWS Connection Failure:
- Ensure both speakers are not connected to any other Bluetooth device before initiating TWS pairing. Try resetting both speakers and repeating the TWS pairing process.
Specifications
| Feature | Detail |
|---|---|
| Brand | Lenyes |
| Model Name | S881 |
| Model Number | TSAAUG141 |
| Speaker Maximum Output Power | 120 Watts |
| Connectivity Technology | Bluetooth, AUX, USB |
| Bluetooth Version | V5.3 |
| Bluetooth Range | 10 Metres |
| Audio Output Mode | Surround |
| Speaker Type | Tower |
| Enclosure Material | Acrylonitrile Butadiene Styrene (ABS) |
| Product Features | Bass Boost, Hi Res Audio, USB Port, RGB LEDs, TWS |
| Water Resistance Level | IPX4 Water Resistant |
| Number of Microphones | 2 (Wireless) |
| Control Method | Remote Control, On-speaker controls |
| Power Source | Battery Powered |
| Battery Capacity | 6000mAh |
| Battery Average Life | 4 Hours |
| Battery Charge Time | 8 Hours |
| Item Dimensions (D x W x H) | 31D x 38.5W x 27H Centimeters |
| Item Weight | 5.15 Kilograms |
| Compatible Devices | Desktop, Laptop, Smartphone, Tablet |
What's in the Box
- Lenyes S881 Party Speaker
- 2 Wireless Microphones
- Charging Cable
- Wireless Remote Control
Video: A short preview demonstrating the contents of the Lenyes S881 speaker box, including the speaker, two wireless microphones, and a charging cable.
Warranty and Support
Warranty Information
The Lenyes S881 comes with a 1-year limited warranty. This warranty is non-transferable and valid for 1 year from the original date of purchase.
Manufacturer Contact
For support or inquiries, please contact the manufacturer:
Shenzhen Xinzhiyue Technology Co. Ltd., China
Importer Contact: Westercom Private Limited, Lower Parel, Mumbai