Introduction
Thank you for choosing the LEONLITE 25W LED Security Light. This dual-head motion sensor flood light is designed for outdoor use, providing customizable and efficient illumination for your property. This manual provides essential information for safe installation, operation, and maintenance of your new security light.
Figure 1: Overview of the LEONLITE 25W LED Security Light.
Safety Information
Please read all instructions carefully before installation and use. Failure to do so may result in electric shock, fire, or other hazards that could cause injury or property damage.
- WARNING: Risk of Electric Shock. Disconnect power at the fuse or circuit breaker before installing or servicing.
- This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
- Use only 120V AC, 60Hz power supply.
- Suitable for wet locations. Ensure all connections are properly sealed to prevent water ingress.
- Do not attempt to modify the fixture. Any modifications will void the warranty and may pose safety risks.
- Keep flammable materials away from the light fixture.
Figure 2: The light is designed for wet locations and is ETL listed for safety.
What's in the Box
The LEONLITE 25W LED Security Light package includes:
- 1 x LEONLITE 25W LED Security Light (Light kit included)
Setup and Installation
Professional installation is recommended for optimal safety and performance.
1. Mounting the Fixture
Ensure the mounting surface is stable and can support the weight of the fixture. Follow standard electrical wiring practices for outdoor lighting. Turn off power at the circuit breaker before beginning installation.
2. Wiring
Connect the light fixture's wires to your household wiring according to local electrical codes. Typically, this involves connecting the black wire to live, the white wire to neutral, and the green/bare copper wire to ground. Use appropriate wire connectors and ensure all connections are secure and weatherproof.
3. Adjusting Light Heads and Sensor
The light heads and motion sensor are highly adjustable to provide optimal coverage and detection.
- Beam Angle Adjustment: Each light head can be adjusted from a narrow 30° beam to a wide 80° beam. To adjust, gently slide the front part of the light head in or out. A narrower beam projects light farther, ideal for pathways, while a wider beam provides broad coverage for open areas.
- Light Head Direction: The light heads can be rotated up to 320° horizontally and 120° vertically to direct illumination precisely where needed.
- Sensor Adjustment: The motion sensor can be rotated 140° horizontally and 170° vertically to optimize its detection area.
Figure 3: Adjustable light heads and motion sensor for customized coverage.
Figure 4: The beam angle can be zoomed from 30° to 80° for focused or broad lighting.
Video 1: This video demonstrates the adjustable features of the LEONLITE 25W LED Security Light, including the beam angle, light head direction, and motion sensor positioning. It also highlights the motion detection mode and wet location suitability.
Operating Instructions
The LEONLITE security light features an intelligent PIR motion sensor for automated operation.
1. Motion Sensor Modes
The light operates in a PIR sensor mode, activating only when motion is detected at night. This ensures energy efficiency and convenience.
Figure 5: The light activates automatically when motion is detected at night.
Figure 6: The motion sensor offers a detection range of 13-45 feet and a 150° detection angle.
2. Time and Sensitivity Settings
The sensor unit has controls to adjust the duration the light stays on after motion is detected and the sensitivity of the motion sensor.
- TIME Setting: Adjust the delay duration to 30 seconds, 60 seconds, or 120 seconds. This determines how long the light remains illuminated after motion ceases.
- SENSITIVITY Setting: Adjust the motion detection range from 13 feet to 45 feet. This allows you to fine-tune the sensor's responsiveness to avoid unwanted activations.
Figure 7: Controls for setting the lighting duration and motion detection range.
Maintenance
To ensure the longevity and optimal performance of your LEONLITE LED Security Light, follow these maintenance guidelines:
- Cleaning: Periodically clean the light fixture with a soft, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or electrical components.
- Inspection: Regularly inspect the fixture for any signs of damage, loose wiring, or wear. If any issues are found, disconnect power and consult a qualified electrician for repair.
- Sensor Lens: Keep the motion sensor lens clean and free from obstructions (e.g., dirt, spiderwebs) to ensure accurate detection.
Troubleshooting
If you experience issues with your security light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on at night. | No power; Sensor sensitivity too low; Obstruction in sensor's view. | Check power supply; Increase sensor sensitivity; Clear obstructions from sensor lens. |
| Light stays on continuously. | Sensor detecting constant motion; Wiring issue; Sensor malfunction. | Adjust sensor angle to avoid constant motion sources; Check wiring; Contact support if sensor is faulty. |
| Light turns on during the day. | Sensor malfunction or incorrect setting. | Ensure the light sensor is not obstructed and is functioning correctly. The light is designed to activate only at night. |
| Detection range is too short/long. | Sensor sensitivity setting. | Adjust the SENSITIVITY dial on the sensor unit. |
Specifications
| Feature | Specification |
|---|---|
| Brand | LEONLITE |
| Model Name | A-45732 |
| Power Source | AC |
| Voltage | 120 Volts |
| Wattage | 25 watts |
| Brightness | 2500 Lumen |
| Color Temperature | 5000 Kelvin (Daylight) |
| Beam Angle | Adjustable 30°-80° |
| Motion Sensor Detection Range | 13ft to 45ft |
| Motion Sensor Detection Angle | 150° |
| Delay Durations | 30s/60s/120s |
| Indoor/Outdoor Usage | Outdoor (Wet Location) |
| Material | Plastic |
| Product Dimensions | 7.13"L x 4.44"W x 6.35"H |
| Item Weight | 1.52 Pounds |
| Certifications | ETL Listed |
| Average Life | 50,000 Hours |
Figure 8: Product dimensions for installation planning.
Warranty and Support
The LEONLITE 25W LED Security Light comes with a generous 3-year warranty, ensuring peace of mind regarding its quality and performance.
For further assistance, technical support, or warranty claims, please visit the official LEONLITE store or contact their customer service: