1. Product Overview
The Daylight Slimline 4 LED Table Lamp is designed to provide high-quality, adjustable illumination for various tasks. It features ultra-bright 6,000K LEDs, 4 brightness levels, a flexible design, an anti-glare diffuser, and a convenient USB-C charging port.
Image 1: The Slimline 4 LED Table Lamp, featuring a flexible arm and a clamp for secure mounting.
2. Setup and Installation
The Slimline 4 Table Lamp comes with a 2-in-1 Table Clamp and Screwable Tabletop Mount for versatile installation.
2.1 Attaching the Clamp Mount
- Unpack all components from the box.
- Identify the lamp unit and the clamp assembly.
- Loosen the screw on the clamp until the opening is wide enough to fit over your desired table or desk edge.
- Slide the clamp onto the table edge and tighten the screw securely until the clamp is firm and stable.
- Insert the base of the lamp into the designated slot on the clamp. Ensure it is fully seated and stable.
Image 2: The secure clamp mount for attaching the lamp to a desk or table edge.
2.2 Using the Screwable Tabletop Mount (Optional)
For a more permanent installation, the clamp can be converted into a screwable tabletop mount. Consult the separate instructions provided with the mount for detailed steps on drilling and securing it to a surface.
2.3 Power Connection
- Connect the provided power adapter to the lamp's power input port.
- Plug the power adapter into a suitable electrical outlet.
3. Operating Instructions
The Slimline 4 LED Table Lamp is designed for ease of use with intuitive controls.
3.1 Powering On/Off and Adjusting Brightness
- Locate the tactile micro-switch button on the lamp's stem.
- Press the button once to turn the lamp on to its lowest brightness setting.
- Subsequent presses will cycle through the 4 available brightness levels.
- After the highest brightness level, pressing the button again will turn the lamp off.
Image 3: Illustration of the 4 brightness levels, demonstrating the range from soft to ultra-bright illumination.
3.2 Positioning the Lamp
The lamp features a flexible arm and dual flexible joints, allowing you to adjust the light precisely where needed. Gently bend the arm to direct the light beam. The anti-glare diffuser ensures even light distribution and reduces eye strain.
Image 4: The flexible arm allows for precise positioning of the light.
3.3 Using the USB-C Charging Port
A high-power 5V/2A USB-C port is integrated into the lamp for convenient charging of mobile devices.
- Ensure the lamp is connected to a power source.
- Plug your USB-C compatible device's charging cable into the USB-C port on the lamp's stem.
- Your device will begin charging.
Image 5: The USB-C port located on the lamp's stem for charging devices.
4. Maintenance
Proper care will ensure the longevity and optimal performance of your Slimline 4 LED Table Lamp.
- Cleaning: Disconnect the lamp from the power source before cleaning. Use a soft, dry cloth to wipe down the lamp's surfaces. Avoid abrasive cleaners or solvents, as these can damage the finish.
- Handling: While the lamp has a flexible arm, avoid excessive force or sharp bends that could damage internal wiring.
- Storage: If storing the lamp for an extended period, ensure it is clean, dry, and stored in a safe place to prevent damage.
5. Troubleshooting
If you encounter issues with your lamp, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | No power supply; loose connection; faulty outlet. | Check if the power adapter is securely plugged into both the lamp and the wall outlet. Test the outlet with another device. |
| USB-C port not charging device. | Lamp not powered; faulty cable; device incompatibility. | Ensure the lamp is powered on. Try a different USB-C cable. Verify your device is compatible with 5V/2A charging. |
| Light flickers or is inconsistent. | Unstable power supply; internal issue. | Ensure the power connection is stable. If the problem persists, contact customer support. |
If these solutions do not resolve the issue, please refer to the warranty and support section for further assistance.
6. Specifications
| Feature | Detail |
|---|---|
| Model Name | Slimline 4 Table - Brushed Steel |
| Model Number | U35109 |
| Light Source | LED |
| Color Temperature | 6,000K (Daylight) |
| Brightness | 3,200 Lux at 30cm (12") |
| Color Rendering Index (CRI) | 95+ |
| Brightness Levels | 4 (Adjustable) |
| Power Consumption | 13.6 Watts |
| USB-C Output | 5V/2A |
| Product Dimensions | 22"D x 10"W x 16.5"H |
| Material | Metal |
| Finish Type | Polished Brushed Steel |
| Mounting Type | Tabletop (Clamp & Screwable Mount) |
| Control Method | Touch (Push Button) |
| UPC | 809802351095 |
7. Warranty and Support
7.1 Manufacturer's Warranty
This Daylight Slimline 4 LED Table Lamp is covered by a 2-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.
7.2 Customer Support
For warranty claims, technical assistance, or any questions regarding your product, please contact Daylight customer support. Refer to the product packaging or the official Daylight website for the most current contact information.
When contacting support, please have your model number (U35109) and proof of purchase readily available.
