1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Uckazy 12.3-inch Car Radio. This device is designed for BMW 7 Series F01 and F02 models from 2013 to 2016 with the original NBT System. It integrates advanced features like wireless Carplay, Android Auto, Bluetooth, and multimedia playback while retaining original vehicle functions.
For optimal performance and safety, please read this manual thoroughly before installation and use. If you are unsure about the compatibility of this device with your vehicle, please consult with a professional or contact customer support.
2. Safety Information
- Ensure the vehicle's ignition is off and the battery is disconnected before beginning any installation to prevent electrical shorts or damage.
- Installation should ideally be performed by a qualified technician to avoid improper wiring or damage to the vehicle's electrical system.
- Do not operate the device in a manner that distracts you from driving. Always prioritize road safety.
- Avoid exposing the device to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.
- Use only approved accessories and cables provided with the unit or recommended by the manufacturer.
3. Package Contents
Verify that all items are present in the package:
- Ultra narrow 12.3" in-cell display screen
- Frame
- Plug and play power Cable
- USB/AUX/RCA Cable
- Installation tools and touch pen

4. Installation Guide
The Uckazy 12.3-inch Car Radio is designed for plug-and-play installation, compatible with BMW 7 Series F01 F02 (2013-2016 NBT System). Professional installation is recommended.
4.1 Fiber Optic Cable Transfer
If your vehicle uses fiber optic cables, follow these steps to transfer them to the new system's harness:
- Locate the original car CD power cable.
- Carefully cock the snap on the original power cable connector and pull out the fiber optic cable.
- Insert the 2P fiber optic harness into the Linux system harness. Ensure it is securely connected to the correct interface.

4.2 Power Cable Connection
Connect the provided power cable to the original car's power cable. Ensure the connection is secure and matches the correct interface.

4.3 USB Cable Connection
The system includes two USB ports: USB1 for data link (CarPlay/Android Auto) and USB2 for read storage. For wired CarPlay or Android Auto, always use USB1.

5. Operating Instructions
5.1 System Overview
The Uckazy Car Radio features a dual system, allowing a one-click switch between the Linux system and the original car system. The upgraded capacitive touch screen retains all original functions while adding new features.

5.2 Wireless CarPlay and Android Auto
The system supports wireless (and wired) Apple CarPlay and Android Auto. To connect wirelessly:
- Ensure the necessary wires (LVDS and power cord) are connected to the machine.
- Turn on Bluetooth on your smartphone.
- On the car radio, navigate to the Bluetooth settings and find the device name (e.g., "CAR-BT-7B:0").
- Pair your phone with the car radio.
- Enable Siri voice assistant on your iPhone for CarPlay functionality.
- Allow all permissions on your phone and wait for the connection to establish.

5.3 Display Settings
Adjust display settings for optimal viewing:
- OEM Screen Resolution: Access Setup > Car Settings > Original Car's Screen Resolution. Select the correct resolution (e.g., 800x480) for your original car display to ensure proper information display. If unsure, try each option.
- Automatic Light Sensitivity: The system supports automatic light sensitivity, which adjusts day and night modes according to your car's original headlights.


5.4 Audio Settings (AUX Switching)
To ensure audio output from the new system, the AUX input must be correctly configured.
- First, ensure the stock AUX is plugged in (typically in the manual gear position or passenger side storage box).
- Navigate to Setup > Car Settings > Auto Switch to AUX. Select either "Harman Head Unit" or "Alpine Head Unit" based on your vehicle's audio system.
- For manual AUX setting: Go to the original car's main menu, select "Multimedia," then "External devices." Long press number key "8" until a tone rings. This should enable CarPlay sound.


5.5 Original Car System Integration
The system retains and supports various original BMW functions:
- Original car knob control
- Steering wheel button control
- Factory rear view camera display
- Amplifier system compatibility
- Original Bluetooth retention

6. Maintenance
- Clean the screen with a soft, lint-free cloth. Do not use abrasive cleaners or solvents.
- Regularly check cable connections to ensure they are secure.
- Keep the device's ventilation clear to prevent overheating.
- Perform software updates as recommended by the manufacturer to ensure optimal performance and security.
7. Troubleshooting
If you encounter issues, refer to the following common solutions:
- No Sound: Ensure fiber optic cables are correctly transferred and the AUX input is properly configured (refer to Section 4.1 and 5.4). If the sound from CarPlay or Android Auto is distorted, check the AB connection as indicated in the wiring diagram.
- Original Car UI Not Displaying: Verify the OEM screen resolution setting is correct (refer to Section 5.3).
- Reverse Camera Not Working: Check the camera type settings in Setup > Car Settings > Reversing Settings > Camera Type. Select "Original" or "Aftermarket" as appropriate.
- Connectivity Issues (Bluetooth/Wi-Fi): Ensure Bluetooth is enabled on both the device and your phone. For Wi-Fi, check network availability and password.
- General Malfunction: Try restarting the device. If the issue persists, contact technical support.

8. Specifications
| Brand | Uckazy |
| Model Number | B0DPHK7QF3 |
| Screen Size | 12.3 inches |
| Resolution | 1920 * 720 (HD) |
| Connectivity Technology | Bluetooth, Wi-Fi |
| Special Features | Touchscreen, Wireless CarPlay, Wireless Android Auto, Mirrorlink, Built-in DSP with 16 EQ segments, Dual System (Linux/Original Car) |
| Compatible Devices | Smartphone |
| Audio Output Mode | Stereo |
| Control Method | Touch, Voice |
9. Warranty and Support
Warranty: This product comes with a 1-year manufacturer's warranty.
Technical Support: If you encounter any problems during installation or operation, such as sound issues, original car UI not displaying, or setup difficulties, please contact the seller, Uckzay Factory Outlet, for technical assistance. They can provide solutions and guidance.
You can typically find seller contact information on the product's purchase page or through your order history.
