Airversa Scenta XL (ANW) Replacement Bottle User Manual

1. Product Overview

This document provides instructions for the Airversa Official Replacement Bottle, designed exclusively for use with the Airversa Scenta XL (ANW) Smart Scent Air Machine. This 400mL capacity bottle serves as a direct replacement or an additional reservoir for your preferred essential oils.

Image: Airversa Scenta XL 400mL Replacement Bottle.

2. Product Features

• Compatibility: Exclusively designed for the Airversa Scenta XL (ANW) Smart Scent Air Machine. Not compatible with Scenta VAST (ANA) models.
• Capacity: 400 Milliliters, providing ample volume for extended use.
• Easy Installation: Designed for a secure and snug connection, allowing for quick and effortless replacement.
• Versatile Aroma Options: Facilitates easy switching between different essential oils, enabling customization of your aromatherapy experience.
• Leak-Proof Design: Engineered to prevent leaks, ensuring clean and efficient operation.

3. Safety Information

Always handle essential oils with care. Avoid direct contact with skin and eyes. In case of contact, rinse thoroughly with water. Keep essential oils out of reach of children and pets. Do not ingest essential oils. Ensure the replacement bottle is securely tightened to prevent leaks. Use only 100% pure essential oils as recommended by the diffuser manufacturer. Do not dilute oils with water.

4. Setup and Installation

The Airversa Replacement Bottle is designed for straightforward installation into your Scenta XL (ANW) diffuser. Follow these steps to replace or install a new bottle:

1. Ensure your Scenta XL (ANW) diffuser is powered off and unplugged.
2. Carefully remove the existing essential oil bottle from the diffuser unit.
3. If refilling, unscrew the nozzle from your old bottle and screw it onto the new 400mL replacement bottle. Ensure it is tightened securely to prevent leaks.
4. Insert the new essential oil bottle with the attached nozzle into the designated slot within the Scenta XL (ANW) diffuser. Ensure the bottle is seated correctly and firmly.
5. Close the diffuser's cover, if applicable.
6. Plug in and power on your Scenta XL (ANW) diffuser.

For a visual guide on installing the essential oil bottle into a compatible Airversa diffuser, please refer to the video below:

Video: Demonstrates the installation of an essential oil bottle into an Airversa Waterless Diffuser.

5. Operating Instructions

This 400mL replacement bottle functions as a reservoir for your essential oils within the Airversa Scenta XL (ANW) diffuser. The operation of the scent diffusion, including mist intensity, timing, and scheduling, is controlled directly by your Scenta XL (ANW) Smart Scent Air Machine or its associated mobile application. Please refer to the dedicated user manual for your Airversa Scenta XL (ANW) diffuser for detailed operating instructions.

6. Maintenance

Regular cleaning of the essential oil nozzle and bottle is crucial for optimal performance and longevity of your Airversa Scenta XL (ANW) diffuser system. It is recommended to clean the nozzle at least once a month, or when switching between different essential oil types.

1. Remove the essential oil bottle and nozzle from the diffuser.
2. Empty any remaining essential oil from the bottle.
3. Fill the bottle with 10-20mL of 90% or greater ethanol/isopropyl alcohol.
4. Reinsert the bottle with alcohol into the diffuser.
5. Run the diffuser on a low setting for 5-10 minutes to flush out any residual oil.
6. Remove the bottle, discard the alcohol, and allow the bottle and nozzle to air dry completely before refilling with essential oil.

For a visual guide on cleaning the essential oil nozzle, please refer to the video below:

Video: Demonstrates the cleaning process for an essential oil diffuser nozzle using alcohol.

7. Troubleshooting

• No Scent or Weak Mist: Ensure the bottle is securely tightened to the nozzle and inserted correctly into the diffuser. Check if the essential oil level is sufficient. Clean the nozzle as per maintenance instructions.
• Oil Leaks: Verify that the nozzle is tightly screwed onto the bottle and that the bottle is correctly seated in the diffuser. Ensure the sealing ring within the nozzle is present and undamaged.
• Abnormal Noise: Ensure the bottle is installed correctly and not angled. If the noise persists, refer to your Scenta XL (ANW) diffuser manual or contact Airversa support.

8. Specifications

9. Warranty and Support

For warranty information and customer support regarding your Airversa Official Replacement Bottle or Scenta XL (ANW) diffuser, please refer to the official Airversa product page or contact Airversa customer service directly. Contact details can typically be found on the product packaging or the official Airversa website.