GoYeel 01

GoYeel 18.5-inch Gold Semi-Flush Chandelier Instruction Manual

Model: 01

1. Safety Information

WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing. Consult a qualified electrician if you are unsure about the installation process.

  • Read all instructions carefully before beginning installation.
  • Ensure the electrical supply is turned off at the main circuit breaker or fuse box before installation.
  • All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC).
  • Use only E12 base bulbs as specified. Do not exceed the maximum wattage.
  • Handle glass components with care to prevent breakage.
  • This fixture is designed for indoor use only.

2. Package Contents

Verify that all components are present and undamaged before proceeding with installation.

  • Mounting Hardware (screws, wire nuts, mounting plate)
  • Fixture Base (Gold finish)
  • Glass Globes (13 pieces, including one replacement)
  • Instruction Manual
Product detail showing the gold fixture base and clear swirled glass globes

Image: Detailed view of the fixture base and glass globes.

3. Setup & Installation

Follow these steps carefully for proper installation. It is recommended to have two people for installation.

3.1 Preparation

  1. Turn off the electrical power at the main circuit breaker or fuse box.
  2. Unpack all components and lay them out on a clean, soft surface to prevent scratches.
  3. Review the installation diagram provided in the package.

Video: Installation overview for the GoYeel Swirled Glass Chandelier. This video demonstrates the unboxing, assembly, and mounting process.

3.2 Mounting the Fixture Base

  1. Attach the mounting plate to the junction box in the ceiling using the provided screws.
  2. Connect the electrical wires:
    • Connect the black wire from the fixture to the black wire from the junction box.
    • Connect the white wire from the fixture to the white wire from the junction box.
    • Connect the ground wire from the fixture to the ground wire from the junction box.
    • Secure all connections with wire nuts and wrap with electrical tape for added safety.
  3. Carefully push the wired connections into the junction box.
  4. Align the fixture base with the mounting plate and secure it with the provided screws.

3.3 Attaching Glass Globes

  1. Before installing the glass globes, ensure the power is still off.
  2. Carefully hook each glass globe onto the designated loops on the fixture base. There are 13 globes to attach.

3.4 Installing Light Bulbs

  1. Insert three E12 base bulbs (not included) into the sockets. Do not exceed 50 watts per bulb.
  2. Turn on the electrical power at the main circuit breaker or fuse box.
  3. Test the light fixture.
Diagram showing the dimensions of the chandelier and compatible E12 base bulbs

Image: Chandelier dimensions and E12 bulb compatibility.

4. Operation

This chandelier is designed for simple operation.

  • Turning On/Off: Use your standard wall switch to turn the light fixture on or off.
  • Dimming: If you use dimmable E12 bulbs and a compatible dimmer switch (not included), you can adjust the brightness of the chandelier to create your desired ambiance.
Chandelier shown in daytime and night lighting scenarios

Image: Examples of the chandelier's appearance in daytime and night settings.

5. Maintenance

Regular cleaning will help maintain the appearance of your chandelier.

  • Cleaning: Turn off the power before cleaning. Use a soft, dry cloth to wipe the metal parts. For the glass globes, use a soft cloth dampened with a mild glass cleaner. Avoid abrasive cleaners or solvents that could damage the finish.
  • Bulb Replacement: Ensure the power is off and bulbs have cooled before replacing. Unscrew old bulbs and screw in new E12 base bulbs.

6. Troubleshooting

ProblemPossible CauseSolution
Light does not turn on.
  • Power is off.
  • Loose wire connections.
  • Faulty bulb.
  • Faulty wall switch.
  • Check circuit breaker/fuse.
  • Verify wire connections are secure (power off).
  • Replace bulb.
  • Consult a qualified electrician.
Light flickers.
  • Loose bulb.
  • Incorrect bulb type.
  • Loose wire connection.
  • Tighten bulb.
  • Ensure E12 base bulbs are used.
  • Verify wire connections are secure (power off).
Glass globe is broken.Accidental damage.Use the included replacement globe. Contact customer support for additional replacements if needed.

7. Specifications

  • Brand: GoYeel
  • Model Number: 01
  • Color: Gold
  • Material: Glass, Metal
  • Style: Modern, Elegant
  • Light Fixture Form: Ceiling (Semi Flush Mount)
  • Number of Light Sources: 3
  • Bulb Base: E12
  • Max Wattage: 50 watts (per bulb)
  • Voltage: 110 Volts
  • Dimmable: Yes (with compatible dimmer switch and bulbs)
  • Indoor/Outdoor Usage: Indoor
  • Item Dimensions (L x W x H): 18"L x 10"W x 18"H
  • Shade Color: Clear
GoYeel chandelier installed in a dining room

Image: GoYeel chandelier in a dining room setting.

8. Warranty & Support

GoYeel products are manufactured with quality and care. For any questions, concerns, or warranty claims, please contact GoYeel customer support through the retailer's platform where the product was purchased. Please have your order number and product model (01) ready for faster assistance.

If a glass shade is damaged during transportation or within the warranty period, please inform us immediately for a replacement.

© 2026 GoYeel. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.