NOENNULL XL-013A

Download PDF
Contents

NOENNULL Sports Stopwatch Timer with Lanyard

Model: XL-013A

1. Introduction

Thank you for choosing the NOENNULL Sports Stopwatch Timer. This manual provides detailed instructions for the setup, operation, and maintenance of your new device. Please read this manual thoroughly before use to ensure proper functionality and to maximize your product experience.

Package Contents:

  • 1 x NOENNULL Sports Stopwatch Timer (Model: XL-013A)
  • 1 x Lanyard
NOENNULL Sports Stopwatch Timer with Lanyard, angled view

Image 1.1: The NOENNULL Sports Stopwatch Timer, showing the device with its attached lanyard.

2. Product Overview and Features

The NOENNULL Sports Stopwatch Timer is designed for athletes, coaches, and fitness enthusiasts, offering precise time measurement and multiple display modes. Its compact and durable design makes it suitable for various activities.

Key Features:

  • Multifunction Display: Features 3 display modes for checking time, date, and setting alarms.
  • Durable Construction: Made of plastic material for long-lasting use.
  • Portable Design: Compact size and lightweight design make it easy and portable to carry.
  • Lanyard Included: Comes with a lanyard for convenient carrying during sports activities.
Front view of the NOENNULL Sports Stopwatch Timer showing the display and buttons

Image 2.1: Front view of the stopwatch, highlighting the digital display and control buttons.

3. Setup

3.1 Attaching the Lanyard

  1. Locate the small loop on the top or side of the stopwatch casing.
  2. Thread the thin end of the lanyard through this loop.
  3. Pass the larger loop of the lanyard over the stopwatch and pull it tight to secure the lanyard.

3.2 Initial Power-On and Battery

The stopwatch typically comes with a pre-installed battery. If the display is blank, gently press any button to activate it. If the display remains blank, the battery may need replacement (refer to Section 5.2 for battery replacement instructions).

4. Operating Instructions

The stopwatch features three primary buttons: MODE, START/STOP, and SPLIT/RESET. These buttons control all functions of the device.

Top view of the stopwatch showing the three control buttons

Image 4.1: Top view of the stopwatch, indicating the positions of the MODE, START/STOP, and SPLIT/RESET buttons.

4.1 Switching Modes

Press the MODE button to cycle through the available display modes:

  1. Time/Date Display: Shows current time, day of the week, and date.
  2. Stopwatch Function: Used for timing events.
  3. Alarm Setting: For setting and activating the alarm.

4.2 Setting Time and Date

To set the current time and date:

  1. Ensure the stopwatch is in Time/Date Display mode.
  2. Press and hold the START/STOP button for a few seconds until the time digits begin to flash.
  3. Use the SPLIT/RESET button to adjust the flashing digit (hours, minutes, seconds).
  4. Press the MODE button to move to the next digit or setting (e.g., from hours to minutes, then to date).
  5. Repeat steps 3 and 4 until all desired settings (time, date, day of week) are adjusted.
  6. Press the START/STOP button again to confirm and exit the setting mode.
Stopwatch display showing current time and date

Image 4.2: The stopwatch display showing the current time and day of the week.

4.3 Using the Stopwatch Function

To use the stopwatch for timing events:

  1. Press the MODE button until you reach the Stopwatch Function display (usually indicated by '0:00:00' or similar).
  2. Press START/STOP to begin timing.
  3. To record a split time (lap time) without stopping the main timer, press SPLIT/RESET. The display will show the split time while the timer continues in the background. Press SPLIT/RESET again to return to the running time.
  4. Press START/STOP again to pause the timer.
  5. To resume timing, press START/STOP.
  6. To reset the stopwatch to zero, ensure it is paused, then press SPLIT/RESET.

4.4 Setting and Using the Alarm

To set and activate the alarm:

  1. Press the MODE button until you reach the Alarm Setting mode.
  2. Press and hold the START/STOP button until the alarm time digits begin to flash.
  3. Use the SPLIT/RESET button to adjust the flashing digit (hours, minutes).
  4. Press the MODE button to move between hours and minutes.
  5. Press START/STOP again to confirm the alarm time.
  6. In Alarm Setting mode, press SPLIT/RESET to toggle the alarm ON/OFF. An alarm icon will typically appear on the display when the alarm is active.
  7. When the alarm sounds, press any button to silence it.

5. Maintenance

5.1 Cleaning

To clean your stopwatch, use a soft, dry cloth. For stubborn dirt, a slightly damp cloth with mild soap can be used, followed by a dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the casing or display.

5.2 Battery Replacement

The stopwatch uses a standard button-cell battery (e.g., AG13 or LR44, specific type may vary). When the display becomes dim or unresponsive, the battery may need replacement.

  1. Locate the battery compartment on the back of the stopwatch. This may require a small screwdriver to open.
  2. Carefully remove the old battery.
  3. Insert a new battery of the correct type, ensuring the positive (+) side is facing up.
  4. Securely close the battery compartment.

Note: Dispose of old batteries responsibly according to local regulations.

5.3 Storage

Store the stopwatch in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity. Avoid dropping or subjecting the device to strong impacts.

6. Troubleshooting

  • Display is blank or dim:
    Check the battery. Replace if necessary (refer to Section 5.2).
  • Buttons are unresponsive:
    Ensure the stopwatch is not in a locked mode (if applicable, though this model typically does not have a lock). Try removing and reinserting the battery to perform a soft reset.
  • Incorrect time/date:
    Follow the instructions in Section 4.2 to reset the time and date.
  • Stopwatch not starting/stopping:
    Ensure you are in the correct Stopwatch Function mode (Section 4.3) and pressing the START/STOP button.

7. Specifications

BrandNOENNULL
Model Name (as shown on product)XL-013A
Item Model Number (Internal)NOENNULL3ip19dgft5-67
Product Dimensions3.93 x 2.75 x 1.18 inches (7 x 6 x 2.5 cm)
Item Weight1.8 ounces
MaterialPlastic
Display ModesTime, Date, Alarm, Stopwatch
ManufacturerNOENNULL
Date First AvailableDecember 2, 2024

8. Warranty and Support

This product is covered by a standard manufacturer's warranty. For specific warranty details, please refer to the product packaging or contact your retailer. If you encounter any issues or require technical assistance, please contact NOENNULL customer support through your purchase platform or the contact information provided with the product.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.