Joulle Kettle Pot User Manual

1. Introduction

The Joulle Kettle Pot is a versatile, portable electric cooking device designed for outdoor enthusiasts. With its 500W power consumption, it is optimized for use with portable power stations, making it an ideal companion for car camping, vanlife, and overlanding adventures. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Joulle Kettle Pot.

Figure 1: The Joulle Kettle Pot Glacier model, showcasing its sleek design and integrated handle.

2. Safety Information

Please read all safety instructions carefully before using the Joulle Kettle Pot. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Power Source: Only use the kettle pot with a compatible 500W power source, such as a portable power station, 4x4 vehicle inverter, or solar power system. Ensure the power source can safely deliver the required wattage.
• Indoor Use: The Joulle Kettle Pot is designed for safe use in enclosed spaces like vehicles, as it does not produce carbon monoxide, unlike flame-based heating methods.
• Dry-Burn Protection: The unit is equipped with dry-burn protection, which automatically shuts off the device if there is insufficient water. However, always ensure adequate liquid is present before operation.
• Fire Safety: The kettle pot features a fire-safe design. Keep flammable materials away from the unit during operation.
• Handling Hot Surfaces: The exterior of the kettle pot will become hot during use. Always use the integrated handle and exercise caution when handling.
• Water Immersion: Do not immerse the electrical base or power cord in water or other liquids.
• Children and Pets: Keep the appliance out of reach of children and pets.

3. Components

Your Joulle Kettle Pot package includes:

• Joulle Kettle Pot Unit
• Power Cable
• Popcorn Stirring Accessory
• User Manual (this document)

4. Setup

Before first use, ensure the kettle pot is clean. Follow these steps for initial setup:

1. Unpack: Carefully remove all components from the packaging.
2. Clean: Wash the interior of the kettle pot with warm, soapy water. Rinse thoroughly and dry. Do not submerge the electrical base.
3. Placement: Place the kettle pot on a stable, flat, heat-resistant surface.
4. Connect Power: Plug the power cable into the kettle pot's power input, then connect it to your portable power station or compatible power source.

Figure 2: Simple 'Plug in Cook' steps: 1. Place kettle, 2. Plug in, 3. Select mode.

5. Operating Instructions

The Joulle Kettle Pot features a simple one-button control with three preset modes: Drink, Eat, and Pop. Use the selector switch on the base to choose your desired mode.

Figure 3: The Joulle Kettle Pot displaying its three versatile cooking modes: Drink, Eat, and Pop.

5.1. Drink Mode

Ideal for boiling water for coffee, tea, or rehydrating freeze-dried meals.

• Fill the kettle pot with water up to the maximum fill line.
• Select 'Drink' mode using the switch.
• The kettle will rapidly heat the water to a rolling boil and automatically shut off.

Figure 4: A user pouring coffee from the Joulle Kettle Pot, demonstrating its use in Drink Mode.

5.2. Eat Mode

Perfect for cooking soups, stews, pasta, or heating canned goods. This mode provides an auto boil-to-simmer function.

• Add your ingredients to the kettle pot.
• Select 'Eat' mode using the switch.
• The kettle will bring the contents to a boil and then reduce to a simmer for continued cooking.

Figure 5: The Joulle Kettle Pot in Eat Mode, boiling eggs, demonstrating its capability for cooking various foods.

5.3. Pop Mode

Optimized for making popcorn with smart temperature control.

• Add popcorn kernels and a small amount of oil (if desired) to the kettle pot.
• Select 'Pop' mode using the switch.
• The kettle will heat to the optimal temperature for popping and maintain it. Use the included stirring accessory for best results.

Figure 6: A graph illustrating the temperature profiles for Drink mode (500W), Eat mode (240W), and Pop mode (140W), showing precise temperature control.

6. Care and Maintenance

Proper care ensures the longevity and performance of your Joulle Kettle Pot.

• Cleaning: Hand wash the interior of the kettle pot with mild soap and water. Do not use abrasive cleaners or scouring pads. Rinse thoroughly.
• Exterior: Wipe the exterior with a damp cloth. Do not immerse the entire unit in water.
• Storage: Ensure the kettle pot is completely dry before storing. Store in a cool, dry place.
• Descaling: If mineral deposits build up, fill the kettle with a mixture of equal parts water and white vinegar. Boil in 'Drink' mode, then let it soak for 30 minutes before rinsing.

7. Troubleshooting

If you encounter issues with your Joulle Kettle Pot, refer to the following common problems and solutions:

8. Specifications

• Model Name: Kettle Pot Glacier
• Brand: STOKE VOLTAICS
• Power: 500W
• Material: Durable 304 Stainless Steel, Aviation-grade PPS Heat-Resistant Materials
• Special Features: Automatic Shut-Off, Boil Dry Protection, Non-Stick Interior, Removable Lid, Sustainable Heating
• Color: Black
• Item Weight: 2.46 pounds
• Package Dimensions: 10.51 x 5.71 x 5.59 inches
• Product Care: Hand Wash

Figure 7: An exploded view diagram illustrating the internal components and robust construction of the Joulle Kettle Pot.

9. Warranty and Support

For warranty information or technical support, please refer to the warranty card included with your product or visit the official STOKE VOLTAICS website. Keep your purchase receipt as proof of purchase.