Swokely Smart Lock with Camera

1. User Guide and Overview

The Swokely Smart Lock with Camera offers advanced security and convenient access for your home or office. This keyless entry system integrates multiple unlocking methods, including fingerprint recognition, password entry, RFID card, mechanical key, and remote control via the TY APP. It features a high-definition camera and a 4.5-inch indoor display for enhanced monitoring and communication.

Figure 1: Swokely Smart Lock with Camera, showing both exterior and interior units.

Key Features:

• Advanced Fingerprint Recognition: Utilizes semiconductor technology for fast (0.5 seconds) and accurate unlocking with a false recognition rate of less than 0.001%. Stores up to 100 fingerprints.
• Multiple Unlocking Methods: Fingerprint, password, RFID card, mechanical key, remote unlocking via TY APP, and temporary password generation.
• Integrated Camera and Display: High-definition viewing camera on the exterior and a 4.5-inch screen on the interior for clear visitor identification.
• Remote Visual Intercom: Communicate with visitors remotely through the TY APP.
• Enhanced Security: Provides alarm notifications for tampering and forced entry.
• Wide Compatibility: Designed for doors with a thickness range of 40mm to 120mm.

Figure 2: Details on the advanced fingerprint recognition technology.

Figure 3: Overview of the various unlocking methods available.

2. Setup and Installation

Proper installation is crucial for the optimal performance and security of your Swokely Smart Lock. Please follow these steps carefully. It is recommended to watch the provided installation videos for visual guidance.

Installation Steps:

1. Prepare the Door: Ensure your door thickness is between 40mm and 120mm. If replacing an existing lock, remove the old hardware.
2. Install the Mortise Lock: Insert the mortise lock body into the door's edge. Secure it with the provided screws.
3. Install the Lock Cylinder: Insert the lock cylinder and fix it with the cylinder screw.
4. Install the Front Panel: Carefully route the cables through the door. Position the front panel (exterior unit) and secure it with the mounting bolts.
5. Install the Back Panel: Connect the corresponding wires from the front panel to the back panel (interior unit). Align the back panel and secure it with screws.
6. Insert Batteries: Open the battery compartment on the interior unit and insert 8 AA batteries (not included). Close the compartment.
7. Test Functionality: After installation, test all unlocking methods and ensure the handles operate smoothly.

Figure 4: Smart lock dimensions and door thickness compatibility.

3. Operating Instructions

Your Swokely Smart Lock offers various convenient ways to unlock your door. Below are instructions for common operations.

Unlocking Methods:

• Fingerprint: Place your registered finger on the fingerprint sensor. The lock will unlock if the fingerprint is recognized.
• Password: Enter your registered password on the keypad, followed by '#'.
• RFID Card: Present your registered RFID card to the card reader area on the keypad.
• Mechanical Key: In case of emergency or battery depletion, use the provided mechanical key to unlock the door.
• TY APP Remote Unlocking: Use the dedicated TY APP on your smartphone to remotely unlock the door.

Adding Users (Fingerprint, Password, Card):

To add new users, you will typically need to access the administrator settings via the keypad. Refer to the video below for a general guide on adding users.

Figure 5: TY APP interface for intelligent management and remote visual intercom.

Figure 6: Indoor HD display showing a visitor.

4. Maintenance

To ensure the longevity and optimal performance of your Swokely Smart Lock, regular maintenance is recommended.

Battery Replacement:

• The lock operates on 8 AA batteries (not included).
• When the battery level is low, the lock will provide an alert. Replace all 8 batteries promptly to avoid interruption of service.
• To replace, open the battery compartment on the interior unit, remove old batteries, and insert new ones, ensuring correct polarity.

Cleaning:

• Wipe the exterior and interior surfaces with a soft, dry cloth.
• Avoid using abrasive cleaners or solvents, as these can damage the finish and electronic components.
• Keep the fingerprint sensor and camera lens clean for optimal performance.

Environmental Conditions:

• The lock is designed to function perfectly within a temperature range of -15°C to +60°C.

5. Troubleshooting

If you encounter issues with your Swokely Smart Lock, refer to the following common troubleshooting tips:

• Lock Not Responding: Check battery levels. Replace batteries if low. Ensure all cable connections are secure.
• Fingerprint Not Recognized: Ensure your finger is clean and dry. Try re-registering your fingerprint.
• Password Not Working: Double-check that you are entering the correct password. Ensure the keypad is active before entering the code.
• RFID Card Not Working: Ensure the card is correctly registered. Present the card firmly to the reader.
• Alarm Notifications: The lock provides alarm notifications for tampering and forced entry. Investigate the cause of the alarm immediately.
• App Connectivity Issues: Ensure your smartphone has a stable internet connection. Verify the lock is connected to your home Wi-Fi network. Restart the app or the lock if necessary.

Figure 7: Overview of the smart lock's security alarm features.

6. Specifications

7. Warranty and Support

For any product inquiries, technical assistance, or warranty claims, please contact Swokely customer support through your purchase platform.

Protection Plans:

Extended protection plans are available for purchase to cover your device beyond the standard warranty period. Options include:

• 3-Year Protection Plan
• 4-Year Protection Plan
• Complete Protect (monthly billing)

Please refer to the specific terms and conditions of your purchased protection plan for full coverage details.