LINOVISION ANT-5GCombo7

LINOVISION 5G LTE MIMO Combo 7-in-1 Antenna (ANT-5GCombo7) User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of the LINOVISION 5G LTE MIMO Combo 7-in-1 Antenna (Model ANT-5GCombo7). This antenna is designed for outdoor use, offering comprehensive connectivity with 4x 5G LTE, 2x Wi-Fi, and 1x GNSS capabilities. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.

2. Package Contents

Verify that all items listed below are included in your package. If any items are missing or damaged, please contact LINOVISION support.

LINOVISION 5G LTE MIMO Combo 7-in-1 Antenna and User Manual
Image: Package Contents. The image displays the LINOVISION 5G LTE MIMO Combo 7-in-1 Antenna with its multiple cables and a small user manual booklet.

3. Specifications

The LINOVISION ANT-5GCombo7 antenna features robust design and comprehensive connectivity options.

FeatureDescription
Antenna Type7-in-1 Combo (4x 5G LTE MIMO, 2x Wi-Fi, 1x GNSS)
5G LTE Frequency Range698~960MHz / 1710~2690MHz / 2900~3800MHz
Wi-Fi Frequency Range2400~2483.5MHz / 4900~5925MHz
GNSS Frequency Range1561.098~1575.42MHz
Connectors4x SMA Male (5G LTE), 2x RP-SMA Male (Wi-Fi), 1x SMA Male (GNSS)
Cable Length3 meters (10 feet)
Mounting TypeScrew Mount (Outdoor Roof Type)
Ingress ProtectionIP67 (Water and Dust Resistant)
Impedance50 Ohms
Product Dimensions7.48"L x 5.91"W x 5.91"H (189mm x 150mm x 150mm approx.)
Item Weight2.53 pounds (1.15 kg)
ColorBlack
Antenna Dimensions Diagram
Image: Antenna Dimensions. A diagram illustrating the physical dimensions of the antenna, including length, width, height, and cable length.
Antenna Interface Diagram
Image: Antenna Interface. A diagram showing the seven cables extending from the antenna, labeled with their respective connector types (4x SMA Male for 5G/4G, 2x RP-SMA Male for WiFi, 1x SMA Male for GNSS).

4. Setup and Installation

The LINOVISION ANT-5GCombo7 antenna is designed for outdoor roof mounting. Follow these steps for secure and effective installation.

4.1 Site Selection

Outdoor Roof SMA Antenna mounted on a roof
Image: Outdoor Roof SMA Antenna. The antenna is shown mounted on a vehicle roof, highlighting its IP67 waterproof rating and suitability for outdoor environments.

4.2 Mounting Steps

  1. Drill a Hole: Drill a 0.98 inch (25mm) diameter hole at the selected mounting location on the roof. Ensure the hole is clean and free of debris.
  2. Insert Antenna: Carefully insert the antenna's threaded base through the drilled hole from the outside.
  3. Secure with Nut: From the inside, thread the securing nut onto the antenna's base and tighten it firmly to secure the antenna to the roof. Ensure a watertight seal.
  4. Connect Cables: Connect the 4x SMA Male connectors to the 5G LTE ports on your compatible router, the 2x RP-SMA Male connectors to the Wi-Fi ports, and the 1x SMA Male connector to the GNSS port. Ensure all connections are finger-tight.
Antenna Installation Steps
Image: Installation Steps. A three-step diagram showing how to drill a hole, insert the antenna, and secure it with a nut for roof mounting.

4.3 Compatible Routers

This antenna is compatible with most 5G LTE cellular routers that feature 2, 3, 4, 5, 6, or 7 antenna interfaces. Specifically, it is designed to work with Teltonika routers such as RUTM50, RUTC50, RUTX50, and TRB500 (equivalent to Teltonika PR1KC640).

5. Operating Instructions

Once installed and connected to a compatible router, the antenna operates passively to enhance signal reception for 5G LTE, Wi-Fi, and GNSS. No specific configuration is required for the antenna itself.

Antenna Application Scenarios
Image: Application. This image displays various application scenarios for the antenna, including RVs, transportation vehicles (trucks), marine vessels, and construction sites.

6. Maintenance

The LINOVISION ANT-5GCombo7 antenna is designed for durability and requires minimal maintenance.

7. Troubleshooting

If you experience issues with your antenna, refer to the following common troubleshooting steps:

If issues persist after attempting these steps, please contact LINOVISION customer support.

8. Warranty and Support

LINOVISION is committed to providing reliable products and excellent customer service.

Related Documents - ANT-5GCombo7

Preview LINOVISION IOT-R51W vSIM Routers User Manual
User manual for the LINOVISION IOT-R51W vSIM Router, covering installation, PC connection, web platform access, WiFi settings, use cases, and troubleshooting.
Preview Linovision IoT-R32L Industrial Cellular Router Quick Guide
A concise guide to installing and configuring the Linovision IoT-R32L industrial cellular router, covering hardware overview, installation, login, and network setup.
Preview Linovision IOT-R32W Industrial 4G LTE Cellular Router Specifications
Detailed specifications for the Linovision IOT-R32W Industrial 4G LTE Cellular Router, including network connectivity, protocol support, industrial design, security features, hardware and software specifications, and package contents.
Preview Linovision IOT-R32W User Manual
User manual for the Linovision IOT-R32W industrial cellular router, covering installation, hardware introduction, and basic configuration steps for network connectivity.
Preview Linovision IOT-R32 Industrial Cellular Router Quick Start Guide
This guide provides essential information for installing and configuring the Linovision IOT-R32 industrial cellular router, including hardware setup, PC configuration, and network connection methods (WAN and cellular).
Preview Linovision IOT-R75W Quick Start Guide
A quick start guide for the Linovision IOT-R75W industrial cellular router, detailing installation, hardware overview, and basic network configuration steps.