Introduction
Thank you for choosing the imokin 10000mAh 65W Portable Charger. This versatile device combines a 65W wall charger, a 35W portable power bank, and built-in USB-C and Lightning cables, offering a comprehensive charging solution for a wide range of devices. This manual provides essential information for safe and efficient use of your new portable charger.
Product Overview
The imokin Portable Charger is designed for maximum convenience and functionality, integrating multiple charging methods into a compact form factor.
Key Features:
- 3-in-1 Charging Solution: Functions as a 65W wall charger, a 35W portable power bank, and a built-in cable charger.
- 10000mAh Capacity: Provides ample power for multiple device charges.
- Smart Digital Display: Shows exact battery percentage (0-100%) at a glance.
- Dual Ports & Built-in Cable: Features one USB-A port, one USB-C port, and one attached USB-C cable for charging up to 3 devices simultaneously.
- Foldable AC Plug: Integrated foldable plug for direct wall charging and compact storage.
- Compact & Portable: Measures 4.5 x 2.7 x 1.2 inches and weighs 7.8 ounces, making it ideal for travel.
Figure 1: imokin 10000mAh 65W Portable Charger - Front View
Figure 2: The 3-in-1 functionality of the imokin Portable Charger.
Setup
Charging the Portable Charger:
Before initial use, fully charge your imokin Portable Charger.
- Via Wall Plug (65W Max): Extend the foldable AC plug from the back of the charger. Plug the charger directly into a wall outlet. The digital display will show the charging progress. Full charge takes approximately 4 hours.
- Via USB-C Port (35W Max): Connect a USB-C to USB-C cable (not included) from a power adapter to the USB-C IN/OUT port on the charger. Plug the power adapter into a wall outlet. The digital display will show the charging progress. Full charge takes approximately 6 hours.
Figure 3: Recharging methods for the power bank.
Figure 4: Foldable AC Plug for convenient wall charging.
Operating Instructions
Charging Your Devices:
The imokin Portable Charger offers multiple ways to charge your devices.
- Using Built-in USB-C Cable: Pull out the integrated USB-C cable from the side of the charger. Connect it directly to your USB-C compatible device (e.g., smartphone, tablet, laptop).
- Using USB-A or USB-C Ports: Connect your device's charging cable to either the USB-A OUT port or the USB-C IN/OUT port on the charger.
- Simultaneous Charging: You can charge up to three devices concurrently using the built-in cable and both USB ports.
- Wall Charger Mode: When plugged into a wall outlet, the charger can deliver up to 65W to connected devices, prioritizing the wall power while also recharging its internal battery.
- Portable Mode: When unplugged, the internal 10000mAh battery provides up to 35W output for on-the-go charging.
Figure 5: Charging multiple devices simultaneously.
Video 1: Demonstrates the imokin portable charger's versatility as a travel charger for various devices.
Compatibility
The imokin Portable Charger is widely compatible with a variety of electronic devices:
- Laptops: MacBook, MacBook Pro, MacBook Air
- Smartphones: iPhone 17, 16, 15, 14, 13, 12, 11, 8, 7 Series, XR, XS Max; Samsung S25, S24, S23, S22, S21, S20, A52, A32, Z Fold series, Z Flip; Google Pixel 3 and more.
- Tablets: iPad Pro/Air Series
- Wearables: Apple Watch, Smartwatches
- Audio: AirPods Pro, Headphones
- Gaming: Nintendo Switch
- Other: Drones and various USB-powered gadgets.
Figure 6: Wide compatibility with built-in USB-C cable and USB ports.
Specifications
| Feature | Specification |
|---|---|
| Model Number | MOPB0101 |
| Battery Capacity | 10000 Milliamp Hours |
| Wall Charger Output | 65W Max |
| Portable Charger Output | 35W Max |
| Connector Type | USB Type A, USB Type C |
| Number of Ports | 3 (1x USB-A, 1x USB-C, 1x Built-in USB-C cable) |
| Item Dimensions (L x W x T) | 4.5" x 1.2" x 2.7" |
| Item Weight | 7.8 Ounces |
| Battery Cell Type | Lithium Polymer |
| Special Features | Built-in Cable and AC Wall Plug, Fast Charging, Over Charging Protection, Short Circuit Protection |
Maintenance
To ensure the longevity and optimal performance of your imokin Portable Charger, please follow these maintenance guidelines:
- Keep the device dry and away from moisture.
- Avoid exposing the charger to extreme temperatures (hot or cold).
- Clean the exterior with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
- Store in a cool, dry place when not in use.
- Do not attempt to disassemble or repair the device yourself. This will void the warranty.
Troubleshooting
If you encounter any issues with your imokin Portable Charger, please refer to the following common troubleshooting steps:
- Device not charging: Ensure the portable charger itself is sufficiently charged. Check all cable connections to ensure they are secure. Try a different cable or port.
- Slow charging: Verify that your device supports fast charging and that the cables used are rated for the appropriate power delivery. Ensure the portable charger is adequately charged.
- Digital display not working: Press the power button to activate the display. If it remains unresponsive, try recharging the power bank.
- Overheating: It is normal for the charger to become slightly warm during operation. If it becomes excessively hot, disconnect all devices and allow it to cool down before resuming use.
If the problem persists, please contact customer support.
Warranty and Support
Your imokin Portable Charger is covered by a 2-year manufacturer warranty. For any product-related inquiries, technical support, or warranty claims, please contact imokin customer service. Our support team is available 24 hours a day to assist you.
Please refer to the contact information provided on the product packaging or visit the official imokin website for further assistance.