Tissting Tisstingh92706o8uv

Download PDF
Contents

Starlink Mounting Kit User Manual

Model: Tisstingh92706o8uv

Product Overview

This manual provides detailed instructions for the installation, operation, and maintenance of your Tissting Starlink Mounting Kit. This kit is designed to securely mount your Starlink V2 rectangular antenna on various surfaces, including roofs and walls.

Tissting Starlink Mounting Kit components

Figure 1: Tissting Starlink Mounting Kit, showing the bracket pole and base.

The kit is constructed from premium stainless steel with a powder-coated finish, ensuring durability and resistance to environmental elements such as rain, snow, and wind. Its robust design provides a stable and secure installation for your Starlink satellite internet equipment.

Package Contents

Before beginning installation, please verify that all components listed below are present in your package:

  • 1 x Bracket Pole
  • 1 x Bracket Base
  • 4 x Screw
  • 4 x Screw Cover
  • 1 x Long Screw Rod
  • 2 x Short Screw
  • 3 x Nut
Dimensions of the Starlink Mounting Kit base and pole

Figure 2: Key dimensions of the mounting kit components. Stand Base Size: 180x120x3mm (7.1x4.7x0.1in). Inner Tube Diameter: 35mm (1.38in). Outer Tube Diameter: 38mm (1.50in).

Setup and Installation

This section provides step-by-step instructions for installing the Starlink Mounting Kit. Ensure you have the necessary tools and safety equipment before proceeding.

  • Drill
  • Screwdriver (appropriate for screws provided)
  • Measuring tape
  • Pencil or marker
  • Safety glasses and gloves

Installation Steps:

Four-step installation guide for the Starlink Mounting Kit

Figure 3: Visual guide for the installation process.

  1. Prepare the Surface: Identify the desired mounting location on your roof or wall. Ensure the surface is clean, dry, and structurally sound to support the mount and the Starlink dish. If using the included waterproof glue (as implied by the image), peel off the backing and adhere it to the roof where the base will be placed.
  2. Secure the Bracket Base: Position the bracket base and mark the drilling points. Drill pilot holes if necessary. Install the four screws through the base into the marked positions, ensuring the base is firmly attached to the surface.
  3. Assemble the Bracket Pole: Attach the bracket pole to the bracket base using the long screw rod and nuts. Ensure the connection is secure and stable. The design allows for adjustment of the installation angle.
  4. Insert Starlink Device: Carefully insert the Starlink adapter rod (from your Starlink V2 kit) into the inner tube of the bracket pole. Press and push until it snaps perfectly onto the internal clips. Tighten the knob on the side of the pole to secure the Starlink device in place.
Starlink dish mounted on a shingle roof using the Tissting kit

Figure 4: Example of the Starlink dish securely mounted on a shingle roof.

Starlink dish mounted on a metal roof using the Tissting kit

Figure 5: Example of the Starlink dish securely mounted on a metal roof.

Adjustable angle feature of the mounting kit

Figure 6: The mounting kit allows for free adjustment of the installation angle, providing flexibility for optimal satellite positioning.

Operating Considerations

Once installed, the mounting kit requires no active operation. Its function is to provide a stable and secure platform for your Starlink V2 satellite dish. Ensure the Starlink dish is properly oriented according to Starlink's instructions for optimal signal reception.

The adjustable angle feature of the mount allows for fine-tuning the dish's orientation after initial installation, if needed, to maximize signal strength and stability. This adjustment can be made by loosening the main bolt connecting the pole to the base, adjusting the angle, and then re-tightening securely.

Maintenance

The Tissting Starlink Mounting Kit is designed for minimal maintenance due to its durable stainless steel construction and powder-coated finish.

  • Periodic Inspection: Annually, or after severe weather events, inspect the mount for any signs of loosening, corrosion, or damage.
  • Fastener Check: Ensure all screws and nuts remain tight. Re-tighten if any looseness is detected.
  • Cleaning: If necessary, clean the mount with a damp cloth to remove dirt or debris. Avoid abrasive cleaners that could damage the finish.
  • Drainage: Ensure that the mounting location allows for proper water drainage to prevent pooling around the base.

Troubleshooting

This section addresses common issues you might encounter with the mounting kit.

ProblemPossible CauseSolution
Mount feels loose after installation.Screws or nuts are not sufficiently tightened.Re-tighten all screws and nuts securely. Ensure the mounting surface is solid.
Starlink dish does not fit into the pole.Incorrect Starlink model or improper insertion.Ensure you have a Starlink V2 rectangular antenna. Verify the orientation and push firmly until it clicks into place. Do not force it.
Difficulty adjusting the angle.Adjustment bolt is too tight.Loosen the main bolt connecting the pole to the base slightly, adjust the angle, then re-tighten firmly.
Signs of rust or corrosion.Damage to the powder coating or extreme environmental exposure.Clean the affected area and apply a rust-inhibiting paint or coating if necessary. Ensure proper drainage around the mount.

Specifications

Detailed technical specifications for the Tissting Starlink Mounting Kit:

  • Item Type: Satellite Roof Mount Kit
  • Material: Stainless Steel
  • Color: Black
  • Stand Base Size: Approx. 180x120x3mm / 7.1x4.7x0.1in
  • Inner Tube Diameter: 35mm / 1.38in
  • Outer Tube Diameter: 38mm / 1.50in
  • Applicable Device: For Starlink V2, For Starlink Internet Kit Satellite
  • Item Weight: 1.8 pounds
  • Package Dimensions: 11.81 x 4.72 x 4.33 inches
  • Model Number: Tisstingh92706o8uv

Warranty Information

This product is covered by a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or contact Tissting customer support. Keep your proof of purchase for warranty claims.

Customer Support

If you have any questions, require technical assistance, or need to report an issue with your Tissting Starlink Mounting Kit, please contact our customer support team. For the most up-to-date contact information, please visit the official Tissting store page on Amazon or their official website.

You can visit the Tissting Store on Amazon: Tissting Store

© 2024 Tissting. All rights reserved.

This manual is for informational purposes only. Specifications are subject to change without notice.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.