AILE Blood Pressure Monitor

1. Introduction

The AILE FC-BP131 Automatic Upper Arm Blood Pressure Monitor is designed for accurate and convenient blood pressure and heart rate measurement at home. Featuring advanced smart sensing technology and algorithms, it provides reliable readings with intelligent pressurization for comfort. Its extra-large color screen ensures clear readability, and the device supports two users with extensive memory storage.

2. Important Safety Information

• Consult your physician before using this device for any medical condition. Self-diagnosis and treatment based on measurement results can be dangerous.
• Do not use this device on infants or individuals who cannot express their consent.
• Avoid taking measurements immediately after exercise, bathing, or consuming alcohol/caffeine.
• Ensure the cuff is applied correctly and comfortably, not too tight or too loose.
• Keep the device away from strong electromagnetic fields.

3. Package Contents

Your AILE FC-BP131 Blood Pressure Monitor package includes:

• 1 x AILE Blood Pressure Monitor (FC-BP131)
• 1 x Large Blood Pressure Cuff (fits upper arm sizes 22-42cm)
• 1 x USB Cable
• 4 x AAA Batteries
• 1 x Storage Pouch
• 1 x Instruction Manual

4. Product Overview

The AILE FC-BP131 features a sleek design with an extra-large color display for easy reading. The main unit houses the display, control buttons (SET, START/STOP, MEM), and ports for the cuff and power. The comfortable, skin-friendly cuff is designed for upper arm measurements.

5. Setup

5.1 Power Supply

The monitor can be powered by either 4 AAA batteries (included) or via the provided USB cable.

• Using Batteries: Open the battery compartment on the bottom of the device and insert the 4 AAA batteries, ensuring correct polarity.
• Using USB Power: Connect the USB cable to the monitor's USB port and plug the other end into a compatible USB power adapter (not included) or a computer.

5.2 Connecting the Cuff

Insert the air plug of the cuff firmly into the air jack on the side of the main monitor unit.

6. Operating Instructions

6.1 Applying the Arm Cuff

1. Ensure your arm is bare or has thin clothing.
2. Place the cuff on your upper left arm, approximately 0.8-1.2 inches (2-3 cm) above the elbow joint. The air tube should run down the inside of your arm.
3. Wrap the cuff snugly around your arm, ensuring it is not too tight. The index line on the cuff should fall within the 'OK' range.

6.2 Taking a Measurement

1. Sit comfortably with your back supported and feet flat on the floor. Rest your arm on a table so the cuff is at heart level.
2. Remain still and silent during the measurement.
3. Press the START/STOP button. The cuff will automatically inflate, and the measurement will begin.
4. Once complete, your systolic (SYS), diastolic (DIA), and pulse (PUL) readings will be displayed on the screen.

6.3 Dual-User Mode

The monitor supports two users, storing 120 readings for each. To switch between User 1 and User 2, press the SET button when the device is off. The user icon (1 or 2) will change on the display.

6.4 Memory Function

To review past readings, press the MEM button when the device is off. Each press will cycle through stored measurements for the currently selected user.

7. Understanding Your Readings

The large color screen displays your readings clearly. In addition to numerical values, the monitor provides color-coded indicators to help you interpret your blood pressure status at a glance:

• Red: Serious high blood pressure
• Orange: Middle high blood pressure
• Yellow: Light high blood pressure
• Light Green: Normal high blood pressure
• Green: Normal blood pressure
• Dark Green: Perfect blood pressure

8. Proper Measurement Posture

For the most accurate readings, follow these guidelines:

1. Sit straight and relax your body.
2. Keep the cuff and your heart at the same level.
3. Relax your hand and keep the palm up.
4. Ensure the air pipe is not twisted or bent.
5. Do not move or talk while measuring.

9. Troubleshooting & Error Indicators

The monitor is designed to detect common operational mistakes and display corresponding indicators:

• Cuff Position Self-Check: An icon indicates if the cuff is applied correctly.
• Body Motion Detection: An icon alerts you if excessive movement occurred during measurement, which can affect accuracy.
• Error Codes: Refer to the full instruction manual for specific error codes and their solutions.

10. Maintenance

• Cleaning: Wipe the monitor and cuff with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water.
• Storage: Store the device in its pouch in a cool, dry place, away from direct sunlight and extreme temperatures.
• Battery Replacement: Replace all four AAA batteries when the low battery indicator appears on the display.

11. Specifications

12. Warranty and Support

The AILE Blood Pressure Monitor comes with a 5-year warranty, reflecting the manufacturer's commitment to quality and durability. For any support inquiries, troubleshooting assistance, or warranty claims, please refer to the contact information provided in the full instruction manual or visit the official AILE website.

13. Official Product Video