Amazon Basics 1200W PTC Ceramic Fan Heater Instruction Manual

1. Safety Instructions

Read all instructions before using this heater. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap.
• This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces.
• Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the heater and keep them away from the sides and rear.
• Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.
• Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner.
• Do not use outdoors.
• To disconnect heater, turn controls to OFF, then remove plug from outlet.
• Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
• To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
• A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable vapors or liquids are used or stored.
• Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
• Always unplug heater when not in use.
• Tip-Over Protection: The heater is equipped with a safety tip-over switch that automatically shuts off the heater if it is tipped over.
• Overheat Protection: The heater is equipped with an automatic overheat protection device. If the heater overheats, the device will automatically shut off the heater.
• Child Lock: Press and hold the child lock button for 3 seconds to activate/deactivate.

2. Product Overview

The Amazon Basics 1200W PTC Ceramic Fan Heater provides efficient and rapid heating for your space. It features multiple operating modes, oscillation, and advanced safety functions.

2.1 Components

• Heater Unit
• Remote Control (CR2025 battery compatible)
• Power Cord

2.2 Key Features

• Powerful Instant Heating: 1200W PTC ceramic technology provides rapid heating in 2 seconds, covering up to approximately 18m².
• Multiple Operating Modes: Features 5 modes (High, Medium, Low, ECO, Fan Only).
• Adjustable Temperature: Temperature range from 5°C to 35°C, adjustable in 1° increments.
• 70° Oscillation: Wide-angle oscillation for even heat distribution.
• Smart ECO Mode: Automatically adjusts heating power to maintain the set temperature, optimizing energy consumption.
• Digital Display & Remote Control: Easy operation with a digital display and included remote control.
• Built-in Carry Handle: Portable design for easy movement.
• Compact Design: Space-saving dimensions (14.8cm x 14.8cm x 40.1cm).
• Quiet Operation: Operates at 40dB in low mode.
• Safety Features: Tip-over switch, overheat protection, reinforced safety plug, and child lock function.
• Timer Function: 24-hour programmable timer.

2.3 Product Images

3. Setup

1. Unpacking: Carefully remove the heater from its packaging. Retain packaging for future storage or transport.
2. Placement: Place the heater on a firm, level surface. Ensure it is at least 0.9 meters (3 feet) away from walls, furniture, curtains, and other combustible materials. Do not place it on soft surfaces like carpets or rugs that might block the air intake.
3. Power Connection: Ensure the heater is switched off before plugging it into a standard 100V AC electrical outlet. Do not use extension cords or power strips.
4. Remote Control Battery: Insert the CR2025 battery into the remote control if not already installed.

First Use Note: A slight odor may be present during the first 10-15 minutes of operation. This is normal and will dissipate quickly.

4. Operating Instructions

The heater can be operated using the touch control panel on top of the unit or the included remote control.

4.1 Power On/Off

• Press the Power button (Power icon) on the control panel or remote to turn the heater on or off.

4.2 Mode Selection

Press the Mode button (Mode icon) to cycle through the 5 operating modes:

1. High Heat (HI): Maximum heating power.
2. Medium Heat (MED): Moderate heating power.
3. Low Heat (LO): Lower heating power, ideal for maintaining warmth.
4. ECO Mode: Automatically adjusts heating power to maintain the set temperature, optimizing energy consumption.
5. Fan Only (FAN): Circulates air without heating.

4.3 Temperature Adjustment

• In heating modes (High, Medium, Low, ECO), use the "+" and "-" buttons to adjust the desired temperature from 5°C to 35°C in 1° increments.

4.4 Oscillation Function

• Press the Oscillation button (Oscillation icon) to activate or deactivate the 70° horizontal oscillation.

4.5 Timer Function

• Press the Timer button (Timer icon) to set the auto-off timer. The timer can be set from 1 to 24 hours. Each press increases the time by 1 hour.

4.6 Child Lock

• To activate the child lock, press and hold the Child Lock button (Child Lock icon) for 3 seconds. This will disable all other buttons on the control panel.
• To deactivate, press and hold the Child Lock button again for 3 seconds.

4.7 Display Auto-Off

• The digital display will automatically turn off after 15 seconds of inactivity to reduce light disturbance, especially during sleep.

5. Maintenance

Regular cleaning and proper storage will ensure the longevity and efficient operation of your heater.

1. Before Cleaning: Always turn off the heater and unplug it from the electrical outlet. Allow the heater to cool down completely before cleaning.
2. Exterior Cleaning: Use a soft, damp cloth to wipe the exterior surfaces of the heater. Do not use abrasive cleaners or solvents as they may damage the finish.
3. Air Intake/Exhaust Grilles: Use a vacuum cleaner with a brush attachment to remove dust and lint from the air intake and exhaust grilles. Ensure these openings are clear of obstructions.
4. Storage: When not in use, store the heater in a cool, dry place. It is recommended to store it in its original packaging to protect it from dust and damage.
5. Cord Care: Do not wrap the power cord tightly around the heater. Avoid placing heavy objects on the cord.

6. Troubleshooting

If your heater is not operating correctly, refer to the following common issues and solutions:

7. Specifications

8. Warranty and Support

For warranty information and customer support, please refer to the documentation included with your product or visit the official Amazon Basics website.

If you experience any issues or have questions regarding your Amazon Basics 1200W PTC Ceramic Fan Heater, please contact Amazon customer service for assistance.