Product Overview
The Qaba 2 Seater Ride on UTV is an electric car designed for toddlers aged 3-8 years. It features dual 24V motors for robust power, four-wheel spring suspension for a smooth ride, and adjustable speed levels ranging from 2.5 to 3.7 mph. This UTV enhances playtime with built-in music, a horn, and bright LED lights. Its dimensions are 46.9" L x 31.1" W x 28" H, with a weight capacity of 110 lbs.
Image: The Qaba 2 Seater Ride on UTV, showcasing its vibrant green and black design with bright LED headlights.
Safety Information
Please read all instructions carefully before assembly and use. Adult supervision is required at all times when the vehicle is in use. Ensure children wear appropriate safety gear, such as a helmet, when operating the UTV. Do not operate the vehicle near roads, motor vehicles, steep inclines, swimming pools, or other bodies of water. Only use on flat, dry surfaces. Keep hands, hair, and clothing away from moving parts.
Warning: No Warning Applicable (as per product data).
Package Contents
Before beginning assembly, ensure all parts listed below are present and undamaged. If any parts are missing or damaged, do not proceed with assembly and contact customer support.
- Main UTV Body
- Wheels (4)
- Steering Wheel
- Seats (2)
- Shock Absorbers (4)
- Battery (24V 7AH)
- Charger
- Assembly Hardware (screws, nuts, washers)
- Instruction Manual
Image: A brown cardboard box with the Qaba logo, indicating the product comes in one package.
Setup and Assembly
Assembly is required for this product. Please follow these steps carefully. It is recommended to have two adults for assembly.
- Unpacking: Carefully remove all components from the packaging. Keep packaging materials until assembly is complete to ensure no parts are discarded.
- Wheel Installation: Attach each wheel to its respective axle. Ensure the shock absorbers are correctly aligned and secured.
Image: A visual representation highlighting the four-wheel spring suspension system for a smooth ride.
- Steering Wheel Assembly: Connect the steering wheel to the steering column. Ensure all electrical connections for the horn and music are properly seated.
- Seat Installation: Securely fasten the two seats into the designated slots on the UTV body.
Image: The UTV designed with two seats, allowing two children to ride comfortably.
- Battery Connection: Connect the battery terminals according to the instructions provided. Ensure a secure connection to prevent power interruptions. The 24V 7AH battery is included.
- Initial Charge: Before first use, fully charge the battery for 8-12 hours. Do not overcharge.
Operating Instructions
Familiarize yourself with the controls before allowing a child to operate the UTV.
Controls:
- Power Button: Located on the dashboard, press to turn the UTV on/off.
- Forward/Reverse Switch: Select desired direction of travel.
- Foot Pedal: Press to accelerate. Release to brake.
- Speed Selector: Switch between "Fast" and "Slow" speeds (2.5-3.7 mph).
Image: The control panel of the UTV, showing buttons for music, horn, and speed selection (Fast/Slow).
- Music/Horn Buttons: Activate built-in music and horn sounds.
Image: The steering wheel area, highlighting the integrated music and horn features for interactive play.
- LED Lights: Headlights and taillights illuminate when the UTV is powered on.
Driving Tips:
- Always ensure the child is seated properly and wearing any recommended safety gear.
- Start in "Slow" speed mode until the child is comfortable with the controls.
- Supervise closely, especially when operating on uneven terrain. The UTV is equipped with shock absorbers for various terrains.
- Avoid sharp turns at high speeds to prevent tipping.
Maintenance
Regular maintenance will extend the life of your Qaba UTV.
- Cleaning: Wipe the UTV with a soft, damp cloth. Do not use abrasive cleaners or solvents. Do not hose down or immerse in water.
- Battery Care:
- Recharge the battery after each use.
- If storing for extended periods, charge the battery once a month to maintain its life.
- Do not allow the battery to fully discharge.
- Only use the charger supplied with the product.
- Storage: Store the UTV in a dry, cool place away from direct sunlight and moisture.
- Inspections: Periodically check all screws, nuts, and connections to ensure they are tight. Inspect wheels and tires for wear.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| UTV does not move | Battery is low or dead Loose battery connection Overload protection activated | Charge the battery Check and secure battery terminals Reduce weight, turn off and restart after a few minutes |
| Slow movement | Low battery Overloaded Operating on rough terrain | Recharge battery Reduce weight Move to a smoother surface |
| Lights/Music not working | Loose wire connection Component malfunction | Check all wire connections Contact customer support |
Specifications
| Feature | Detail |
|---|---|
| Model Number | 370-340V80GN |
| Product Dimensions | 46.9" L x 31.1" W x 28" H |
| Item Weight | 44.5 pounds |
| Battery | 24V 7AH (included) |
| Motor | Dual 24V Motors |
| Speed Range | 2.5-3.7 mph |
| Weight Capacity | 110 lbs |
| Recommended Age | 3-8 years |
| Features | 4 Shock Absorbers, Music, Horn, LED Lights |
Image: Detailed dimensions of the Qaba 2 Seater Ride on UTV.
Warranty and Support
For warranty information and customer support, please refer to the contact details provided by Aosom LLC, the manufacturer. Keep your purchase receipt for warranty claims.
Manufacturer: Aosom LLC
Customer Support: For assistance with assembly, parts, or operation, please visit the Qaba brand store on Amazon or contact Aosom Direct customer service. Visit Qaba Store
Returns: This product is eligible for 30-day easy returns. Please check Amazon's return policy for details.
