1. Important Safety Information
Please read this entire manual carefully before using the heater. Failure to follow these instructions could result in fire, electric shock, injury, or property damage. Keep this manual for future reference.
- Placement: Always place the heater on a firm, level surface. Do not place on soft surfaces like beds or rugs where openings may be blocked.
- Clearance: Maintain a minimum distance of 1 meter (3 feet) from walls, furniture, curtains, and other combustible materials.
- Power Supply: Ensure the heater is connected to a grounded outlet of the correct voltage (220-240V, 50Hz). Do not overload electrical circuits.
- Extension Cords: Avoid using extension cords. If one is necessary, ensure it is heavy-duty and rated for the heater's wattage.
- Moisture: Do not use the heater in wet or damp locations, such as bathrooms or laundry areas. Keep away from water sources.
- Supervision: Do not leave the heater unattended while in use. Always unplug the heater when not in use.
- Children and Pets: Keep children and pets away from the heater. The surface can become hot during operation.
- Overheat Protection: This heater is equipped with an automatic overheat protection system. If the heater overheats, it will shut off automatically. Unplug the heater, allow it to cool for 30 minutes, then plug it back in.
- Tip-Over Switch: The heater includes a safety tip-over switch that automatically turns off the unit if it is accidentally knocked over.
- Maintenance: Do not attempt to repair or modify the heater yourself. Refer all servicing to qualified personnel.
2. Package Contents
Carefully unpack the box and ensure all items are present and in good condition.
- Amazon Basics Portable Ceramic Electric Heater
- Remote Control (with 1 x 12V battery included)
- User Manual
3. Product Overview
Familiarize yourself with the components and controls of your heater.
Figure 1: Front view of the Amazon Basics Portable Ceramic Electric Heater.
Control Panel and Display
Figure 2: Digital control panel and display showing current temperature.
- Power Button: Turns the heater on or off.
- Mode Button: Cycles through heating modes (High, Medium, Low, ECO, Fan Only).
- Temperature Up/Down Buttons: Adjusts the desired temperature (5-35°C).
- Oscillation Button: Activates or deactivates the 70° oscillation function.
- Timer Button: Sets the 24-hour programmable timer.
- Digital Display: Shows current temperature, selected mode, and timer settings.
Remote Control
The remote control provides convenient access to all heater functions. Ensure the 12V battery is correctly installed.
Figure 3: The heater shown with its included remote control.
4. Setup
- Unpack: Remove the heater and all packaging materials from the box.
- Placement: Place the heater on a stable, flat, and heat-resistant surface. Ensure it is at least 1 meter (3 feet) away from any walls, furniture, or other objects.
- Power Connection: Plug the power cord into a standard 220-240V, 50Hz grounded electrical outlet. Ensure the outlet is not overloaded by other appliances.
- Remote Control Battery: If not already installed, open the battery compartment on the remote control and insert the 12V battery, observing correct polarity.
5. Operating Instructions
Power On/Off
- Press the Power button on the control panel or remote control to turn the heater on. The digital display will illuminate.
- Press the Power button again to turn the heater off.
Selecting Heating Mode
With the heater on, press the Mode button repeatedly to cycle through the available modes:
- High Heat: Provides maximum heating output (1800W).
- Medium Heat: Provides moderate heating output.
- Low Heat: Provides minimal heating output.
- ECO Mode: The heater automatically adjusts its power output to maintain the set temperature, optimizing energy consumption.
- Fan Only: Operates as a fan without heat.
Setting Temperature
In any heating mode (High, Medium, Low, ECO), you can set your desired temperature:
- Use the Temperature Up (+) or Down (-) buttons on the control panel or remote control.
- The temperature can be set between 5°C and 35°C, with precise 1°C adjustments.
- The heater will automatically turn on or off to maintain the set temperature.
Oscillation Function
To distribute heat evenly across a wider area:
- Press the Oscillation button on the control panel or remote control. The heater will begin to rotate 70° from side to side.
- Press the Oscillation button again to stop the oscillation.
Setting the Timer
The 24-hour programmable timer allows you to set a duration for the heater to operate before automatically turning off.
- With the heater on, press the Timer button. The display will show "00".
- Use the Temperature Up (+) or Down (-) buttons to set the desired number of hours (1-24).
- Once the desired time is set, the timer will activate after a few seconds. The display will show the remaining time before switching back to the temperature display.
- To cancel the timer, press the Timer button until "00" is displayed, or turn off the heater.
6. Maintenance
Regular cleaning and proper storage will help ensure the longevity and efficient operation of your heater.
Cleaning
- Always unplug the heater and allow it to cool completely before cleaning.
- Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Use a vacuum cleaner with a brush attachment to gently remove dust from the air intake and exhaust grilles.
- Ensure no water or liquids enter the interior of the heater.
Storage
- Unplug the heater and allow it to cool completely.
- Clean the heater as described above.
- Store the heater in its original packaging or a suitable container in a cool, dry place.
- Do not place heavy objects on top of the heater during storage.
7. Troubleshooting
If you experience issues with your heater, refer to the following common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Heater does not turn on. | No power supply. Tip-over switch activated. Overheat protection activated. | Ensure power cord is securely plugged into a working outlet. Place the heater on a flat, stable surface. Unplug, wait 30 minutes for cooling, then plug back in. |
| Heater produces no heat. | Fan Only mode selected. Temperature setting is too low. | Select a heating mode (High, Medium, Low, ECO). Increase the desired temperature setting above the current room temperature. |
| Oscillation not working. | Oscillation function not activated. | Press the Oscillation button to activate. |
| Remote control not working. | Battery depleted or incorrectly installed. Obstruction between remote and heater. | Replace the 12V battery or ensure correct polarity. Remove any objects blocking the signal path. |
If the problem persists after attempting these solutions, contact customer support.
8. Specifications
Technical details for the Amazon Basics Portable Ceramic Electric Heater.
Figure 4: Dimensions of the heater: 17cm (L) x 15.5cm (W) x 25.4cm (H).
- Model Number: DQ2508R-EU
- Brand: Amazon Basics
- Type: Portable Ceramic Electric Heater
- Power Output: 1800W
- Voltage: 220-240V
- Frequency: 50Hz
- Dimensions (L x W x H): 17 cm x 15.5 cm x 25.4 cm
- Weight: Approximately 1.7 kg
- Oscillation: 70°
- Temperature Range: 5°C - 35°C
- Special Features: Overheat Protection, Tip-Over Switch, Digital Display, Remote Control, 24-Hour Timer, ECO Mode
- Color: Grey
- Indoor/Outdoor Use: Indoor Use Only
9. Warranty and Support
For warranty information or customer support, please refer to the documentation provided at the time of purchase or visit the official Amazon Basics website. Do not attempt to open or repair the product yourself, as this may void the warranty and pose safety risks.
