1. Product Overview
The RESTMO Heavy Duty Metal Watering Wand is designed for efficient and versatile garden watering. Constructed from premium zinc-alloy, it offers durability and a comfortable user experience with its ergonomic design and thumb flow control. It features 10 distinct spray patterns to suit various watering and cleaning needs.
Image 1: Overview of the RESTMO Watering Wand, highlighting its key components including the shock-resistant rubber dial, aluminum alloy tube, ergonomic handle, thumb flow controller, and 3/4" leak-free hose thread.
2. Setup Instructions
- Inspect Components: Ensure all parts of the watering wand are present and undamaged. The package should include the watering wand and replacement rubber seal gaskets.
- Attach to Hose: The watering wand is threaded with a 3/4” Garden Hose Thread (GHT). Connect it securely to any standard garden hose by twisting the hose connector onto the wand's base.
- Ensure Tight Seal: Hand-tighten the connection. The wand is equipped with a rubber seal gasket to provide an extreme water-tight seal, preventing leaks. If leaks occur, ensure the gasket is properly seated or replace it with a spare if necessary.
3. Operating Instructions
3.1. Thumb Flow Control
The watering wand features a thumb flow control for easy adjustment of water pressure. Simply push or pull the lever with your thumb to switch between on, off, and varying pressure levels (high to low).
Image 2: Close-up of the anti-slip thumb flow control, demonstrating how to adjust water flow from off to maximum.
3.2. Selecting Spray Patterns
The spray head dial allows you to select one of 10 distinct water patterns. Rotate the dial to choose the desired pattern:
- Shower: Gentle spray for delicate plants and flowers.
- Flat: Wide, flat spray for efficient watering of larger areas or rinsing surfaces.
- Full: A strong, full stream for general watering.
- Mist: Fine mist for seedlings or sensitive plants.
- Jet: Powerful, concentrated stream for cleaning tough dirt or reaching distant areas.
- Center: Concentrated spray from the center for targeted watering.
- Cone: Cone-shaped spray for covering a moderate area.
- Angle: Angled spray for specific cleaning tasks or reaching awkward spots.
- Vertical: Vertical fan spray.
- ½ Vertical: Half vertical fan spray.
Image 3: Visual representation of the 10 available spray patterns on the watering wand, including Shower, Flat, Full, Mist, Jet, Center, Cone, Angle, Vertical, and ½ Vertical.
Examples of use:
- For cleaning windows, use the Jet pattern.
- For washing your car, the Angle pattern can be useful.
- For watering shrubs, use the gentle Shower pattern.
- For watering hanging baskets, the soft Mist pattern is ideal.
Image 4: A person using the watering wand for car washing, demonstrating a powerful spray pattern.
Image 5: A person watering a hanging basket, illustrating a gentle spray pattern suitable for delicate plants.
4. Maintenance
- Cleaning: After each use, rinse the wand with clean water to remove any dirt or debris. This helps prevent clogging of the spray nozzles.
- Storage: Store the watering wand in a dry, shaded area when not in use to protect it from extreme temperatures and UV exposure, which can degrade rubber components.
- Gasket Inspection: Periodically check the rubber seal gasket at the hose connection point for wear or damage. Replace with a new gasket if signs of wear or leakage are observed. Spare gaskets are typically included with the product.
- Winterization: In freezing climates, ensure all water is drained from the wand before storing it for winter to prevent damage from ice expansion.
5. Troubleshooting
- Leaking at Connection:
- Ensure the hose connection is tightened securely.
- Check the rubber seal gasket for proper seating. Replace the gasket if it is worn or damaged.
- Weak Water Flow:
- Verify that the thumb flow control is fully open.
- Check the water source (faucet) for adequate pressure.
- Inspect the spray head for any blockages or debris. Clean if necessary.
- Vibrations or Water Hammer (with expandable hoses):
- Some expandable hoses may cause vibrations or water hammer effects when the flow is not at maximum. Try using the wand at full flow or with a standard garden hose to mitigate this.
6. Specifications
| Feature | Detail |
|---|---|
| Model Number | O-HN-3W |
| Material | Zinc Alloy Metal |
| Length | 15 inches (approx. 15.4 inches total product dimension) |
| Spray Patterns | 10 (Shower, Flat, Full, Mist, Jet, Center, Cone, Angle, Vertical, ½ Vertical) |
| Flow Control | Thumb Control |
| Hose Connection | 3/4” Garden Hose Thread (GHT) |
| Weight | 1.08 pounds |
| Dimensions (L x W x H) | 15.4 x 3.9 x 2.6 inches |
7. Warranty and Support
For warranty information, product support, or to inquire about replacement parts, please contact Restmo customer service directly. Refer to the product packaging or the official Restmo website for the most current contact details.
You can visit the official Restmo store for more products and information: Restmo Store
