NEWFAST AXE5400 PCIe WiFi Card User Manual

1. Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your NEWFAST AXE5400 PCIe WiFi Card (NF-P395). This internal network card is designed to enhance your desktop PC's wireless capabilities, offering WiFi 6E tri-band connectivity and Bluetooth 5.3. It features the Intel AX210 chipset, supporting high-speed data transfer rates and advanced network technologies like MU-MIMO and OFDMA for an optimized wireless experience.

Image 1.1: Overview of the NEWFAST AXE5400 PCIe WiFi Card's key features, including WiFi 6E, Intel AX210 chipset, Bluetooth 5.3, MU-MIMO, OFDMA, and tri-band speed capabilities.

2. Package Contents

Please verify that all items listed below are included in your package:

• 1 x NEWFAST AXE5400 PCIe WiFi Card (NF-P395)
• 1 x User Manual (this document)
• 1 x Bluetooth Cable
• 2 x 5 dBi Detachable Antennas
• 1 x Replaceable Low-Profile Bracket
• 1 x Tightening Screws

Image 2.1: The NEWFAST AXE5400 PCIe WiFi Card with its two external antennas, highlighting its WiFi 6E and Bluetooth 5.3 capabilities.

3. System Requirements

• Operating System: Windows 10 (64-bit) or Windows 11 (64-bit). Note: The 6GHz band is only available on Windows 11 systems. Windows 10 systems will utilize the 5GHz and 2.4GHz bands.
• PCIe Slot: An available PCI Express slot (PCIe x1, x4, x8, or x16).
• Motherboard: An available F_USB header on the motherboard for Bluetooth functionality.

Image 3.1: Visual representation of the supported operating systems, Windows 10 (64-bit) and Windows 11 (64-bit).

4. Setup and Installation

4.1. Physical Installation

1. Power Off PC: Completely shut down your computer and disconnect the power cable from the wall outlet.
2. Open PC Case: Remove the side panel of your computer case to access the motherboard.
3. Locate PCIe Slot: Identify an available PCI Express slot (x1, x4, x8, or x16). Remove the corresponding metal bracket cover from the PC case.
4. Insert WiFi Card: Carefully insert the NEWFAST AXE5400 PCIe WiFi Card into the chosen PCIe slot, ensuring it is firmly seated. Secure the card with a screw. If your case requires a low-profile bracket, replace the standard bracket on the card with the included low-profile one before installation.
5. Connect Bluetooth Cable: Connect one end of the included Bluetooth cable to the 9-pin F_USB header on the WiFi card and the other end to an available F_USB header on your motherboard. This connection is essential for Bluetooth functionality.
6. Attach Antennas: Screw the two detachable antennas onto the connectors on the back of the WiFi card. Adjust their orientation for optimal signal reception.
7. Close PC Case: Reattach the side panel of your computer case and reconnect the power cable.

Image 4.1: Illustration of different PCIe slot types available on a motherboard, indicating compatibility with the WiFi card.

4.2. Driver Installation

After physical installation, you must install the necessary drivers for the WiFi card and Bluetooth module to function correctly.

1. Power On PC: Start your computer.
2. Download Drivers: Visit the official NEWFAST support website or the Intel website (for AX210 chipset drivers) to download the latest drivers for your operating system (Windows 10/11).
3. Install Drivers: Locate the downloaded driver files and follow the on-screen instructions to complete the installation. You may need to restart your computer after installation.
4. Verify Installation: After restarting, open Device Manager (search for it in Windows) and check under 'Network adapters' and 'Bluetooth' to ensure the Intel Wi-Fi 6E AX210 and Bluetooth 5.3 devices are listed and functioning without errors.

5. Operating Instructions

5.1. Connecting to a Wi-Fi Network

1. Click the Wi-Fi icon in the system tray (bottom-right corner of your screen).
2. A list of available Wi-Fi networks will appear. Select your desired network.
3. Click Connect. If prompted, enter the network security key (password).
4. Your computer should now be connected to the Wi-Fi network.

The NEWFAST AXE5400 supports tri-band connectivity (2.4GHz, 5GHz, and 6GHz). Your system will automatically connect to the optimal band based on network availability and configuration. Remember, the 6GHz band is exclusive to Windows 11.

5.2. Bluetooth Device Pairing

Ensure the Bluetooth cable is correctly connected to your motherboard's F_USB header for Bluetooth functionality.

1. Go to Settings > Bluetooth & devices (Windows 11) or Settings > Devices > Bluetooth & other devices (Windows 10).
2. Ensure Bluetooth is turned On.
3. Click Add device or Add Bluetooth or other device.
4. Select Bluetooth from the options.
5. Put your Bluetooth device into pairing mode.
6. Select your device from the list and follow any on-screen prompts to complete the pairing process.

Image 5.1: The NEWFAST AXE5400 PCIe WiFi Card's Bluetooth 5.3 capability, illustrating its connection to multiple peripheral devices.

6. Specifications

Image 6.1: Key features of the Intel AX210 Wi-Fi 6E chipset integrated into the card, including supported technologies and operating systems.

7. Troubleshooting

If you encounter issues with your NEWFAST AXE5400 PCIe WiFi Card, refer to the following common problems and solutions:

• No Wi-Fi Connection:
  • Ensure the card is properly seated in the PCIe slot.
  • Verify that the antennas are securely attached.
  • Check Device Manager to confirm the Wi-Fi adapter is recognized and drivers are installed correctly. Reinstall drivers if necessary.
  • Ensure Wi-Fi is enabled in Windows settings.
• Slow Wi-Fi Speeds:
  • Ensure your router supports WiFi 6E (or WiFi 6) and is configured for optimal performance.
  • Check for interference from other devices or physical obstructions.
  • Update your router's firmware.
  • Adjust antenna orientation for better signal reception.
• Bluetooth Not Working:
  • Verify that the Bluetooth cable is securely connected to both the card and the motherboard's F_USB header.
  • Check Device Manager to confirm the Bluetooth adapter is recognized and drivers are installed. Reinstall drivers if necessary.
  • Ensure Bluetooth is enabled in Windows settings.
  • Ensure your Bluetooth device is in pairing mode and within range.
• Card Not Detected by PC:
  • Power off the PC, reseat the card in the PCIe slot, and restart.
  • Try a different PCIe slot if available.
  • Ensure your motherboard BIOS/UEFI settings are configured to enable PCIe slots.

8. Maintenance

To ensure the longevity and optimal performance of your NEWFAST AXE5400 PCIe WiFi Card, consider the following maintenance tips:

• Driver Updates: Regularly check the NEWFAST or Intel website for the latest driver updates. Keeping drivers current can improve performance, stability, and security.
• Cleanliness: Periodically clean the interior of your PC case to prevent dust buildup on the WiFi card's heatsink. Dust can impede heat dissipation and affect performance. Use compressed air for cleaning.
• Airflow: Ensure adequate airflow within your PC case to prevent overheating of components, including the WiFi card.
• Antenna Position: Maintain optimal antenna positioning for the best signal strength. Avoid placing obstructions near the antennas.

9. Warranty and Support

For warranty information and technical support, please refer to the documentation included with your purchase or visit the official NEWFAST website. Support resources typically include FAQs, driver downloads, and contact information for customer service.

Online Support: www.newfast.com/support (Note: This is a placeholder link. Please refer to the actual manufacturer's website for accurate support information.)