YAWYORE PX480 Pro ATX Mid-Tower Gaming PC Case

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your YAWYORE PX480 Pro ATX Mid-Tower Gaming PC Case. Designed for optimal cooling and aesthetic display, this chassis supports a wide range of components and offers user-friendly features for PC enthusiasts.

2. Safety Information

• Always disconnect the power supply from the wall outlet before installing or servicing any components.
• Handle tempered glass panels with care. They are fragile and can break if dropped or subjected to impact.
• Wear an anti-static wrist strap to prevent electrostatic discharge (ESD) damage to sensitive components.
• Keep small parts and tools away from children.
• Ensure proper ventilation around the PC case to prevent overheating.

3. Package Contents

Upon unboxing, please verify that all items listed below are present:

• YAWYORE PX480 Pro ATX Mid-Tower PC Case
• Accessory Box (screws, cable ties, user manual)
• RGB Fan Controller (if included with your specific model)
• Remote Control for RGB (if included with your specific model)

4. Features Overview

• Motherboard Compatibility: Supports ATX, Micro-ATX, and Mini-ITX motherboards, including models with back-plug designs. Offers 35mm space for cable management.
• Cooling Performance: Top and side panels are compatible with dual 360mm water cooling radiators. The chassis can accommodate up to 10 fans for extensive airflow.
• High-speed I/O Ports: Features 1x Type-C, 2x USB 3.0, and HD Audio ports for convenient connectivity.
• PCI Slots: Includes 7 removable PCI slot baffles, supporting vertical graphics card installation (requires additional extension cable).
• Convenient Disassembly: Modular design with tool-free removable tempered glass panels on three sides for easy installation and maintenance.
• Tempered Glass Side Panel: A 270° ocean view room design with tempered glass allows for a panoramic view of internal components.
• Drive Support: Accommodates 2x 3.5-inch HDDs and 3x 2.5-inch SSDs.
• Component Clearances: Maximum GPU length: 430mm, Maximum CPU Radiator Height: 172mm, Maximum Power Supply Length: 270mm.

Image 1: A fully assembled YAWYORE PX480 Pro PC case showcasing internal components and vibrant RGB lighting through its tempered glass panels.

Image 2: A visual representation of the 270-degree tempered glass design, highlighting the seamless panoramic view of the PC's interior.

Image 3: An internal view of the case with labels indicating maximum dimensions for motherboard, GPU, CPU cooler, and power supply, illustrating spacious interior design.

5. Setup and Installation

5.1. Preparation

• Place the PC case on a flat, stable surface.
• Carefully remove the tempered glass side panels by unscrewing the thumb screws and gently lifting them off. Lay them flat on a soft, non-abrasive surface.
• Familiarize yourself with the internal layout and cable routing options.

5.2. Power Supply Installation

1. Attach the PSU mounting bracket to your power supply unit using the provided screws.
2. Slide the PSU with the attached bracket into the designated power supply compartment at the rear of the case.
3. Secure the PSU to the chassis using the screws on the mounting bracket.

5.3. Motherboard, CPU, RAM, and M.2 SSD Installation

1. Install your CPU into the motherboard socket, ensuring correct orientation.
2. Install your CPU cooler (e.g., AIO liquid cooler) onto the motherboard, following the cooler's specific instructions.
3. Install your RAM modules into the appropriate motherboard slots.
4. Install any M.2 SSDs into the motherboard's M.2 slots, securing them with the provided standoffs and screws.
5. Carefully place the assembled motherboard into the PC case, aligning it with the standoffs.
6. Secure the motherboard to the case using the provided motherboard screws.

5.4. Graphics Card Installation

1. Remove the necessary PCI slot covers from the rear of the case.
2. Insert your graphics card into the primary PCIe slot on the motherboard, ensuring it clicks into place.
3. Secure the graphics card to the case using the PCI slot screws.
4. Connect the required PCIe power cables from the power supply to the graphics card.

5.5. Cable Management

Utilize the 35mm cable management space behind the motherboard tray and the included cable ties to route and secure all power and data cables. This improves airflow and aesthetics.

6. Operating Instructions

6.1. Powering On/Off

• Connect the power cable to the PSU and a wall outlet.
• Flip the power switch on the PSU to the 'ON' position.
• Press the power button located on the top I/O panel of the case to turn on your PC.
• To turn off, shut down your operating system normally, then press the power button or flip the PSU switch if needed.

6.2. I/O Port Usage

The top I/O panel provides easy access to various ports:

• Type-C: For connecting compatible USB-C devices.
• USB 3.0: For connecting USB 3.0 devices for high-speed data transfer.
• HD Audio: For connecting headphones and microphones.

Image 4: A detailed view of the top I/O panel, highlighting the power button, reset key, Type-C port, USB 3.0 ports, and HD Audio jacks.

6.3. RGB Lighting Control

If your case includes ARGB fans and a controller, you can customize lighting effects using the provided remote control or compatible motherboard software. Refer to your fan controller's manual for specific instructions.

7. Maintenance

7.1. Cleaning Dust Filters

The case features high-quality dust filters to prevent dust buildup. Regularly clean these filters to maintain optimal airflow and cooling performance.

1. Gently remove the magnetic dust filters from the top and bottom of the case.
2. Clean the filters using compressed air or by rinsing them with water. Ensure they are completely dry before reattaching.

7.2. Cleaning Glass Panels

Use a soft, microfiber cloth and a glass cleaner (or water) to gently wipe the tempered glass panels. Avoid abrasive materials that could scratch the glass.

8. Troubleshooting

• PC not powering on: Ensure all power cables are securely connected, including the 24-pin ATX and 8-pin CPU power cables to the motherboard, and the PSU switch is ON.
• Fans not spinning/RGB not working: Check fan and RGB controller connections. Ensure the controller is powered and connected to the motherboard or a dedicated RGB header.
• Overheating: Verify that all fans are spinning correctly and dust filters are clean. Ensure proper airflow direction (intake/exhaust).

9. Specifications

Image 5: A comprehensive diagram detailing the product's dimensions, supported motherboard types, fan configurations, and I/O interface specifications.

10. Warranty and Support

For warranty information and technical support, please refer to the documentation included with your purchase or visit the official YAWYORE website. Keep your proof of purchase for warranty claims.