1. Introduction and Overview
This manual provides essential information for the proper use, maintenance, and care of your HJC F71 Full Face Motorcycle Helmet. The HJC F71 helmet is engineered with advanced CAD technology, featuring a fiberglass composite shell for a comfortable, lightweight, and secure fit. It meets stringent DOT FMVSS 218 standards, ensuring high levels of protection for riders.
Image: HJC F71 helmet in use on a motorcycle.
2. Product Features
- DOT FMVSS 218 Approved: Rigorously tested for energy absorption, penetration resistance, and secure chin strap integrity.
- Fiberglass Composite Shell: Designed using advanced CAD technology for a lightweight, comfortable, and secure fit.
- HJ-38 Pinlock-Ready Shield: Scratch-resistant, blocks 99% UV rays, and features a Two-Way Pivot Ratchet for smooth movement and better sealing. An anti-fog insert lens is included.
- HJ-V12 Multi-step Sun Visor: Integrated sun shield allows precise positioning for optimal sun protection and improved peripheral vision.
- SuperCool Interior: Premium hygienic fabric provides enhanced moisture-wicking and quick-drying functions. Removable and washable crown and cheek pads for easy maintenance. Cheek pads allow for safe and quick removal in critical situations.
- Advanced Channeling Ventilation System: Optimizes airflow to expel heat and humidity for a cooler ride.
- SMART HJC 2nd Generation Compatible: Designed for integration with SMART HJC 21B & 50B Bluetooth communication systems (sold separately).
Image: Helmet detail highlighting DOT standard compliance.
Image: Rear view of the helmet showcasing its fiberglass shell construction.
Image: Installation of the SuperCool interior lining.
Image: Front view of the HJC F71 helmet with the HJ-38 shield.
Image: HJC F71 helmet showing the integrated HJ-V12 sun visor.
Image: HJC F71 helmet with the SMART HJC 2nd Generation system integrated.
3. What's in the Box
Your HJC F71 helmet package includes the following items:
- F71 Full Face Motorcycle Helmet
- Pinlock Anti-fog Insert Lens
- Chin Curtain
- Breath Deflector
4. Setup and Installation
4.1. Initial Fit and Adjustment
- Carefully place the helmet on your head, ensuring a snug but comfortable fit.
- Fasten the chin strap securely. The strap should be tight enough that the helmet does not move freely but not so tight as to cause discomfort.
- Check for any pressure points or excessive movement. If the fit is not ideal, refer to the HJC size guide or consult a professional for assistance.
4.2. Pinlock Anti-fog Insert Installation
The included Pinlock insert helps prevent visor fogging. To install:
- Remove the HJ-38 outer shield from the helmet.
- Gently flex the shield to flatten it.
- Align the Pinlock insert's silicone seal with the pins on the inside of the shield.
- Press the insert onto the pins, ensuring the silicone seal creates a tight fit around the shield.
- Reinstall the outer shield onto the helmet.
4.3. SMART HJC Bluetooth System (Optional)
The HJC F71 helmet is designed for seamless integration with SMART HJC 21B & 50B Bluetooth communication systems. These systems are sold separately. Refer to the specific SMART HJC system's manual for detailed installation instructions.
5. Operating Instructions
5.1. Main Visor (HJ-38) Operation
The HJ-38 shield can be opened and closed using the tab located at the bottom center of the shield. The Two-Way Pivot Ratchet system allows for smooth movement and secure closure. Ensure the visor is fully closed and locked before riding at speed.
5.2. Internal Sun Visor (HJ-V12) Operation
The integrated HJ-V12 sun visor can be deployed and retracted using the slider mechanism located on the left side of the helmet. This dynamic multi-step system allows for precise positioning to adapt to varying light conditions.
5.3. Ventilation System
The Advanced Channeling Ventilation System features multiple intake and exhaust vents. Locate the adjustable sliders on the front and top of the helmet to open or close the vents, controlling airflow for optimal comfort and heat dissipation.
6. Maintenance
6.1. Exterior Shell Cleaning
Clean the helmet's exterior with a soft, damp cloth and mild soap. Avoid abrasive cleaners or solvents, as these can damage the matte finish and shell material. Rinse thoroughly and dry with a soft, clean cloth.
6.2. Visor Cleaning
Clean the HJ-38 outer shield and HJ-V12 sun visor with warm water and a soft cloth. For stubborn dirt, use a helmet-specific visor cleaner. Do not use abrasive materials or harsh chemicals. When cleaning the Pinlock insert, use only warm water and a soft cloth, and avoid rubbing the inner surface to preserve its anti-fog properties.
6.3. Interior Cleaning
The SuperCool crown and cheek pads are removable and washable. Gently detach them from the helmet. Hand wash with mild soap and cool water, then air dry completely before reinstallation. Ensure all interior components are dry to prevent mildew and odors.
6.4. Inspection
Regularly inspect your helmet for any signs of damage, such as cracks in the shell, worn straps, or compromised visor mechanisms. If any damage is found, discontinue use and consider replacement or professional inspection.
7. Troubleshooting
7.1. Visor Fogging
If your visor fogs up, ensure the Pinlock anti-fog insert is correctly installed and sealed. You can also slightly open the main visor to allow for additional airflow, or utilize the helmet's ventilation system.
7.2. Excessive Wind Noise
Ensure all vents are closed if you wish to minimize wind noise. A proper fit is crucial for reducing noise; check that the helmet fits snugly around your head and cheeks. Wind noise levels can vary based on motorcycle type, riding position, and external conditions.
7.3. Discomfort or Pressure Points
If you experience discomfort, verify that the helmet size is appropriate for your head. The interior padding may take some time to conform to your head shape. If discomfort persists, consult a helmet sizing guide or a professional for advice.
8. Specifications
| Specification | Value |
|---|---|
| Model Name | F71 |
| Item Model Number | 0853-0135-06 |
| Brand | HJC |
| Material | Fiberglass Composite |
| Certification | DOT FMVSS 218 Approved |
| Closure Type | Ratchet |
| Finish Type | Semi Flat |
| Item Weight | 3.46 pounds (approx. 1.57 kg) |
| Product Dimensions | 15 x 11 x 11 inches (approx. 38.1 x 27.9 x 27.9 cm) |
| UV Protection | 99% UV-A & B protection (HJ-38 shield) |
| Compatibility | SMART HJC 21B & 50B Bluetooth (sold separately) |
9. Official Product Videos
HJC F71 Carbon Series Overview
Video: An official overview of the HJC F71 Carbon series helmet, highlighting its design and features. This video provides a visual guide to the helmet's aesthetics and functionality.
HJC F71 Series Features
Video: A detailed look at the features of the HJC F71 series helmet, demonstrating key aspects such as visor operation, ventilation, and interior components.
10. Safety Information
The HJC F71 helmet is DOT FMVSS 218 certified, indicating it meets the safety standards required for motorcycle helmets in the United States. Always wear your helmet correctly fastened and ensure it is in good condition before every ride.
Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
11. Warranty and Support
For warranty information, product support, or any inquiries not covered in this manual, please contact HJC Helmets customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.
Visit the official HJC website for the most up-to-date support resources and contact information.
