Vaporesso Armour G Kit User Manual

Introduction

Thank you for choosing the Vaporesso Armour G Kit. This electronic cigarette kit is designed for an optimal vaping experience, featuring an 80W maximum output, a 3000mAh built-in battery, and a 5ml pod capacity. It incorporates advanced technology for stable performance and rich flavor. Please read this manual carefully before use to ensure proper operation and maintenance.

Safety Information

Important Safety Warnings:

• Keep out of reach of children and pets.
• This product is intended for adult smokers and vapers only.
• Do not use if you are pregnant, breastfeeding, or have heart disease, high blood pressure, diabetes, or asthma.
• Use only the charging cable provided or recommended by Vaporesso.
• Do not expose the device to extreme temperatures, direct sunlight, or water.
• Do not disassemble, crush, puncture, or incinerate the device.
• If the device shows signs of damage, overheating, or unusual odor, discontinue use immediately.
• This product does not contain nicotine, tobacco, or any pre-filled liquids.

Package Contents

Please check the package contents upon opening. If anything is missing or damaged, contact your retailer.

• 1 x Vaporesso Armour G Kit (with built-in battery)
• 1 x Meshed Coil
• 1 x RPM Mesh Coil
• 1 x Micro USB Cable
• 1 x User Manual

Product Overview

Figure 1: Front view of the Vaporesso Armour G Kit in Brown. Shows the display screen, fire button, and pod connection.

Figure 2: Multiple color variants of the Vaporesso Armour G Kit, showcasing the design from different angles.

The Vaporesso Armour G Kit is designed for durability and performance. Key features include:

• Mega Batt Technology: Powers the device for stable and consistent performance.
• 3000mAh Built-in Battery: Provides long-lasting power with a maximum output of 80W.
• Neo Pulse Mode & COREX Technology: Delivers explosive flavor from the first to the last puff.
• Top Airflow System: Features 4 levels of precise airflow adjustment for customized vaping.
• Easy Filling System: Simplifies e-liquid refills.
• SSS Leak-Proof Technology: Ensures a clean and leak-free vaping experience.
• Durable Material: Constructed with a new material, similar to those used in car seats, for comfort and elegance.
• GTX Coil Compatibility: Designed to work seamlessly with Vaporesso GTX Coils.

Setup

1. Charge the Device: Before first use, fully charge the device using the provided Micro USB cable. Connect the cable to the charging port on the device and a suitable power source. The display will indicate charging status.
2. Install the Coil:
   • Remove the pod from the device.
   • Insert a compatible GTX coil firmly into the base of the pod. Ensure it is seated correctly.
3. Fill the Pod:
   • Locate the filling port on the pod (usually under a silicone plug).
   • Open the plug and carefully fill the pod with your desired e-liquid. Do not overfill.
   • Close the plug securely.
4. Prime the Coil: After filling, wait at least 5-10 minutes before vaping. This allows the e-liquid to fully saturate the coil, preventing dry hits and extending coil life.
5. Attach the Pod: Reattach the filled pod to the device, ensuring it clicks securely into place.

Operating Instructions

1. Power On/Off: Press the fire button 5 times rapidly within 2 seconds to turn the device on or off.
2. Vaping: Press and hold the fire button while inhaling from the mouthpiece. Release the button when you finish inhaling.
3. Adjust Wattage: Use the adjustment buttons (usually located below the screen) to increase or decrease the wattage. Refer to your coil's recommended wattage range for optimal performance.
4. Airflow Adjustment: Rotate the airflow control ring on the pod to adjust the airflow to your preference. There are 4 levels of precise adjustment.
5. Screen Display: The display screen shows important information such as battery level, current wattage, coil resistance, and puff count.

Maintenance

• Cleaning:
  • Regularly clean the device, especially the pod connection area, with a dry cloth or cotton swab to remove any e-liquid residue.
  • Clean the mouthpiece periodically with warm water and allow it to dry completely before reattaching.
• Coil Replacement: Coils are consumable parts and need to be replaced regularly (typically every 1-2 weeks, depending on usage and e-liquid). Replace the coil when you notice a burnt taste, reduced vapor production, or diminished flavor. Follow the coil installation steps in the "Setup" section.
• Battery Care:
  • Avoid fully discharging the battery frequently.
  • Do not leave the device charging unattended for extended periods.
  • Store the device in a cool, dry place when not in use.

Troubleshooting

Specifications

Warranty and Support

Vaporesso products typically come with a limited warranty. Please refer to the warranty card included in your original packaging or visit the official Vaporesso website for detailed warranty terms and conditions.

For technical support, troubleshooting assistance, or inquiries about your device, please contact Vaporesso customer service through their official website or the retailer from whom you purchased the product.

Note: No official product videos from the seller were available for embedding in this manual.