Introduction
Thank you for choosing the Pocket Hose Copper Head 100 FT Expandable Garden Hose. This manual provides essential information for the safe and effective use, maintenance, and storage of your new garden hose. Please read these instructions thoroughly before first use and retain for future reference.
Figure 1: Pocket Hose Copper Head 100 FT Expandable Garden Hose in its compact form.
Setup and Installation
- Unpack the Hose: Carefully remove the Pocket Hose Copper Head from its packaging. Ensure all components, including the hose, Pocket Pivot, and 10-pattern spray nozzle, are present.
- Connect the Pocket Pivot: Attach the innovative Pocket Pivot to your outdoor spigot. The Pocket Pivot is designed to swivel 180° to 360°, reducing strain and preventing kinks at the connection point. Ensure a tight, leak-free connection.
- Attach the Hose: Connect the Pocket Hose Copper Head to the other end of the Pocket Pivot. The APT (Advanced Polymer Technology) connectors provide a secure and leak-proof seal.
- Attach the Nozzle: Securely attach the 10-pattern spray nozzle to the free end of the hose.
- Check for Washers: Ensure washers are properly seated at all connection points to prevent leaks. Three additional washers are included for convenience.
Figure 2: The Pocket Pivot connected to a spigot, demonstrating its swivel capability.
Figure 3: The 10-pattern Thumb Drive Sprayer, showing various spray settings.
Operating Instructions
- Turn on Water: Slowly turn on the water at your spigot. The Pocket Hose Copper Head will automatically expand to its full 100 FT length as it fills with water.
- Adjust Spray Pattern: Use the 10-pattern spray nozzle to select your desired water flow. Options typically include Shower, Mist, Jet, Flat, Cone, Full, Center, Angle, and Vertical. The easy thumb control allows for quick adjustments.
- Watering: Direct the water flow as needed. The Tri-Tex Tubing and Force Field Jacket ensure consistent water flow and resistance to kinking and tangling during use.
- Turn Off Water: When finished, turn off the water at the spigot.
- Drain and Store: Squeeze the nozzle trigger to release any remaining water pressure. The hose will automatically shrink back to its compact size for easy storage.
Figure 4: The Pocket Hose Copper Head in its compact, pre-expansion state.
Figure 5: The Pocket Hose Copper Head fully expanded during use.
Maintenance
- Draining: Always drain the hose completely after each use to ensure it retracts fully and to prevent damage from freezing temperatures.
- Storage: Store the hose in a cool, dry place away from direct sunlight when not in use. Its compact size allows for easy storage in small spaces.
- Cleaning: Wipe down the exterior of the hose with a damp cloth if it becomes dirty. Avoid using harsh chemicals that could damage the Force Field Jacket.
- Inspecting Connections: Periodically check the APT connectors and Pocket Pivot for any signs of wear or damage. Replace washers if leaks occur.
Figure 6: Illustration of the Tri-Tex inner tube and Force Field Jacket construction for durability.
Troubleshooting
- Hose Not Expanding Fully: Ensure the water pressure is adequate. Check for any kinks or obstructions in the hose or at the spigot connection. Make sure the nozzle is open to allow water flow.
- Leaks at Connections: Tighten all connections. Check the rubber washers inside the connectors and replace them if they are worn or damaged. Ensure the Pocket Pivot is securely attached.
- Nozzle Malfunction: Inspect the nozzle for blockages or damage. Ensure the thumb control is fully engaged for the desired spray pattern.
- Hose Not Retracting: Ensure the water is completely turned off at the spigot and all water pressure has been released from the hose by opening the nozzle.
Specifications
| Feature | Detail |
|---|---|
| Brand | Pocket Hose |
| Model | Copper Head 100 FT |
| Material | Aluminum (connectors), Tri-Tex Tubing (latex), Force Field Jacket |
| Color | Copper (accents) |
| Expanded Length | 100 Feet |
| Outside Diameter | 0.75 Inches |
| Maximum Pressure | 650 PSI |
| Item Weight | 2.68 Kilograms |
| Connectors | APT (Advanced Polymer Technology), Lead-Free, Copper-infused |
| Special Features | Pocket Pivot (180°-360° swivel), 10-Pattern Thumb Sprayer, No-Kink, Anti-Burst |
Warranty and Returns
This product is eligible for protection plans. Please refer to your purchase documentation for details on available 2-Year or 3-Year Protection Plans. Standard return policy allows for refund or replacement within 30 days of purchase. For specific warranty claims or return procedures, please contact the retailer or manufacturer directly.
Support
For further assistance, product inquiries, or technical support, please contact the manufacturer, Bulbhead. Contact information can typically be found on the product packaging or their official website.
