Northlight Pre-Lit Full Flocked Glacier Pine Artificial Christmas Tree - 7.5' Multi LED User Manual

1. Introduction

This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your Northlight Pre-Lit Full Flocked Glacier Pine Artificial Christmas Tree. Please read all instructions carefully before assembly and retain this manual for future reference.

Figure 1: Northlight 7.5-foot Pre-Lit Full Flocked Glacier Pine Artificial Christmas Tree.

2. Important Safety Information

To reduce the risk of fire, electric shock, or injury, observe the following safety precautions:

• Read all instructions before using the product.
• Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation.
• This seasonal product is not intended for permanent installation or use.
• Do not mount or place near gas or electric heaters, fireplaces, candles, or other similar sources of heat.
• Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
• Do not let lamps rest on the supply cord or on any wire.
• Unplug the product when leaving the house, when retiring for the night, or if left unattended.
• This is an electric product, not a toy! To avoid risk of fire, burns, personal injury, and electric shock, it should not be played with or placed where small children can reach it.
• Do not use this product for other than its intended use.
• Do not hang ornaments or other objects from cord, wire, or light string.
• Do not close doors or windows on the product or extension cords as this may damage the wire insulation.
• Do not cover the product with cloth, paper, or any material not part of the product when in use.
• Read and follow all instructions that are on the product or provided with the product.

3. Package Contents

Verify that all components are present before beginning assembly:

• Tree sections (4 pieces)
• Metal tree stand
• Replacement bulbs
• Spare fuses

4. Setup and Assembly

Follow these steps to assemble your artificial Christmas tree:

1. Assemble the Tree Stand: Open the metal tree stand and place it on a flat, stable surface. Tighten the eye bolt on the stand to secure the tree trunk.
2. Insert Bottom Section: Carefully insert the bottom section of the tree into the assembled stand. Ensure it is firmly seated and straight.
3. Connect Middle Sections: Continue by inserting the subsequent tree sections into the section below it. The tree features hinged branch construction for easy assembly. Ensure each section's electrical connection is securely plugged into the section below it.
4. Insert Top Section: Place the final top section onto the tree.
5. Fluff the Branches: Once all sections are assembled, begin to 'fluff' the branches. Branches are compressed for shipment and require shaping to achieve the desired full appearance. Work from the bottom up, spreading out each individual branch tip to fill any gaps.
6. Connect to Power: Plug the tree's power cord into a standard 120-volt electrical outlet.

Figure 2: The Northlight Glacier Pine Christmas tree illuminated with multi-color LED lights in a home setting.

Figure 3: Detail of the flocked branches and multi-color LED globe lights at the top of the Christmas tree.

5. Operating Instructions

Your Northlight Pre-Lit Christmas Tree is designed for simple operation.

• Power On/Off: Once assembled and plugged into a power source, the tree's lights will illuminate. To turn off the lights, simply unplug the power cord from the wall outlet.
• Light Features: The tree is pre-lit with 845 multi-color LED lights, including concave wide-angle mini LEDs and 40mm globe lights. These lights are designed to stay cool to the touch and use 90% less energy than traditional incandescent bulbs.

Figure 4: Close-up view of the heavily flocked branches and integrated multi-color LED lights.

Figure 5: A red 40mm globe LED light nestled within the flocked branches of the tree.

6. Maintenance

Proper care will ensure the longevity of your artificial Christmas tree.

• Cleaning: To clean the tree, gently dust the branches with a soft, dry cloth. Do not use liquid cleaners or solvents, as these may damage the flocking or electrical components.
• Bulb Replacement: The tree comes with replacement bulbs. If a bulb needs to be replaced, carefully remove the old bulb and insert a new one of the same type. The LED bulbs are durable and non-glass.
• Fuse Replacement: Spare fuses are included. If the entire light string fails, check the fuse in the plug. Refer to the instructions on the light string tag for fuse replacement.
• Storage: Before storing, ensure the tree is completely unplugged and dry. Disassemble the tree in reverse order of assembly. Gently compress the branches. Store the tree sections and stand in their original packaging or a suitable storage bag in a cool, dry place away from direct sunlight.

Figure 6: A blue concave wide-angle mini LED light on a flocked branch.

Figure 7: A segment of a flocked branch showing the green needles and a blue mini LED light.

7. Troubleshooting

If you encounter issues with your Christmas tree, refer to the following common problems and solutions:

8. Product Specifications

9. Warranty and Support

For specific warranty information or technical support, please refer to the documentation included with your purchase or contact Northlight customer service directly. Keep your proof of purchase for any warranty claims.

You can visit the Northlight Store for more information: Northlight Store on Amazon