Introduction
The Rowenta Advancer TN5224 hair and beard trimmer is designed to provide precise and customizable grooming results for both hair and beard. Featuring durable titanium-coated stainless steel blades and a long-lasting lithium-ion battery, this device ensures efficient and comfortable use. This manual provides essential information for the safe and effective operation, maintenance, and care of your trimmer.
Package Contents
Before using your Rowenta Advancer TN5224, please ensure all items are present in the package:
- Rowenta Advancer Hair and Beard Trimmer
- 2 Adjustable Combs
- Shockproof Travel Case
- Charger
- Cleaning Brush
- Lubricating Oil
Important Safety Information
Please read all instructions carefully before use and retain for future reference.
- Avoid contact with skin and eyes during cleaning or maintenance involving lubricants.
- Do not use the device near water sources (e.g., bathtubs, showers, sinks).
- Keep the device out of reach of children.
- Regularly clean the device to ensure optimal performance and durability.
- Only use the charger supplied with the device.
- Do not disassemble the device; refer to qualified service personnel for repairs.
Setup and Initial Use
Charging the Trimmer
Before first use, fully charge the trimmer. Connect the charger to the trimmer and plug it into a suitable power outlet. The lithium-ion battery provides up to 120 minutes of autonomy and features a quick charge function, reaching full charge in approximately 90 minutes.
Image: The Rowenta Advancer TN5224 trimmer connected to its charger, illustrating the charging process and the 120-minute battery life indicator.
Attaching and Adjusting Combs
Select one of the two adjustable combs based on your desired cutting length. Align the comb with the trimmer head and gently push until it clicks into place. Use the adjustment wheel or slider on the comb to set the desired length. The trimmer offers 29 cutting lengths, ranging from 0.5 mm to 30 mm, with a precision adjustment of 1 mm.
Image: A man using the Rowenta Advancer TN5224 trimmer to cut his hair, highlighting the high precision and adjustable comb feature.
Operating Instructions
Powering On/Off
To turn the trimmer on, press the power button. To turn it off, press the power button again.
Trimming Hair and Beard
- Ensure your hair or beard is clean and dry before trimming.
- Attach the appropriate comb and set your desired cutting length.
- Hold the trimmer with the blades facing downwards and move it against the direction of hair growth.
- Use slow, even strokes for consistent results.
- For detailing or edging without a comb, carefully remove the comb and use the bare blades.
Image: A hand holding the Rowenta Advancer TN5224 trimmer, emphasizing its compact and ergonomic design for comfortable use.
Cleaning and Maintenance
Regular cleaning ensures the longevity and optimal performance of your trimmer.
Cleaning the Blades
- Turn off the trimmer and disconnect it from the power source.
- Remove the adjustable comb.
- The blades are removable and washable. Carefully detach the blade assembly.
- Use the provided cleaning brush to remove any loose hairs from the blades and the trimmer body.
- Rinse the detached blades under running water. Ensure they are completely dry before reattaching.
- Reattach the blade assembly securely.
Image: A close-up view of the Rowenta Advancer TN5224 trimmer's titanium-coated stainless steel blades, illustrating their self-sharpening technology for long-lasting cutting efficiency.
Lubricating the Blades
After every few uses, or if the trimmer's performance decreases, apply a small drop of the provided lubricating oil to the blades. Turn the trimmer on for a few seconds to distribute the oil evenly. This helps maintain cutting efficiency and prevents wear.
Troubleshooting
If you encounter issues with your Rowenta Advancer TN5224, refer to the following common solutions:
- Trimmer not turning on: Ensure the trimmer is fully charged. Check if the charger is properly connected and the power outlet is functional.
- Poor cutting performance: Clean the blades thoroughly to remove any trapped hairs. Lubricate the blades with the provided oil. Ensure the comb is correctly attached and not damaged.
- Battery not holding charge: Ensure the charger is the original one supplied with the device. If the issue persists after following charging instructions, the battery may require service.
- Excessive noise or vibration: Clean and lubricate the blades. Ensure no foreign objects are lodged in the trimmer head.
If problems persist after attempting these solutions, please contact customer support.
Technical Specifications
| Feature | Specification |
|---|---|
| Model Number | TN5224E0 |
| Blade Material | Titanium and Stainless Steel |
| Power Source | Battery Operated (1 Lithium Ion battery included) |
| Battery Autonomy | Up to 120 minutes |
| Charging Time | Approx. 90 minutes (Quick Charge) |
| Cutting Lengths | 29 (0.5 mm to 30 mm, 1 mm precision) |
| Combs | 2 Adjustable Combs |
| Special Features | Quick Charge, Washable Removable Blades |
| Dimensions (Package) | 24.1 x 14.8 x 8.1 cm |
| Weight (Package) | 280 g |
Image: The Rowenta Advancer TN5224 trimmer with its approximate dimensions labeled: 16.5 cm in length and 4 cm in width.
Warranty and Support
Your Rowenta Advancer TN5224 trimmer is covered by a manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions, including the warranty period and coverage details.
For technical support, spare parts, or service inquiries, please visit the official Rowenta website or contact their customer service department. Contact information can typically be found on the Rowenta website or in the documentation provided with your product.
Online Support: www.rowenta.com
