Introduction
This manual provides detailed instructions for the TECKNET Wireless Mouse (Model B0DP2DCC6N). It covers setup, operation, maintenance, and troubleshooting to ensure optimal performance and user experience. This mouse offers dual connectivity (2.4G USB A and Bluetooth 5.0/3.0) and adjustable DPI settings for versatile use across various devices and operating systems.
Figure 1: TECKNET Wireless Mouse (Pink)
Package Contents
- TECKNET Wireless Mouse
- USB A Receiver (stored inside the mouse)
- User Manual (this document)
Note: 2 AAA batteries are not included and must be purchased separately.
Product Features
- Dual Device Connection: Bluetooth (5.0/3.0) and 2.4G USB A.
- 6 Adjustable DPI Levels: 800/1200/1600/2400/3200/4800.
- Silent Click Operation: Designed for quiet environments.
- Ergonomic Design: Shaped for comfortable use.
- Automatic Sleep Technology: Extends battery life.
- Wide Compatibility: Supports Windows, macOS, Chrome, Linux. (Side buttons are not compatible with macOS).
Figure 2: Dual Connection Modes (2.4G USB A and Bluetooth)
Figure 3: Adjustable DPI Settings for Precise Control
Setup Instructions
1. Battery Installation
- Locate the battery compartment on the underside of the mouse.
- Open the battery cover.
- Insert two AAA batteries, ensuring correct polarity (+/-).
- Close the battery cover securely.
Figure 4: Battery Compartment (2 AAA batteries required)
2. Connecting the Mouse
The TECKNET Wireless Mouse offers two connection methods: 2.4G USB A and Bluetooth.
2.1. 2.4G USB A Connection
- Locate the USB A receiver stored in the battery compartment of the mouse.
- Remove the USB A receiver.
- Plug the USB A receiver into an available USB port on your computer.
- Slide the power switch on the bottom of the mouse to the "2.4G" position.
- The mouse should connect automatically.
Figure 5: 2.4G USB A Connection
2.2. Bluetooth Connection
- Slide the power switch on the bottom of the mouse to the "BT" position.
- Press and hold the Bluetooth pairing button (usually a small button near the power switch) until the LED indicator light starts blinking (blue).
- On your computer or device, open Bluetooth settings.
- Search for new devices and select "TECKNET Mouse" (or similar) from the list.
- Follow any on-screen prompts to complete the pairing process.
Figure 6: Bluetooth Connection
Video 1: Demonstration and setup of the Bluetooth wireless mouse.
Operating Instructions
1. Adjusting DPI Sensitivity
The mouse features a DPI switch button, typically located near the scroll wheel. Press this button to cycle through 6 adjustable DPI settings (800/1200/1600/2400/3200/4800) to match your preference for cursor speed and precision.
Figure 7: DPI Switch Button for Sensitivity Adjustment
2. Silent Click Feature
This mouse is designed with silent click buttons, providing a quiet user experience. This is particularly beneficial in environments where noise reduction is desired, such as libraries or shared offices.
Figure 8: Silent Click Operation
Video 2: Review highlighting the silent click feature and ease of pairing.
3. Power Saving Modes
The mouse incorporates automatic sleep technology to conserve battery life. After a period of inactivity, the mouse will enter a sleep mode. To reactivate, simply click any button.
Figure 9: Automatic Sleep Technology for Power Saving
Maintenance
- Cleaning: Use a soft, dry cloth to clean the mouse. Avoid harsh chemicals or abrasive materials.
- Battery Replacement: Replace batteries when the low battery indicator lights up or when performance degrades. Refer to the "Battery Installation" section for instructions.
- Storage: When not in use for extended periods, turn off the mouse to further conserve battery life.
Troubleshooting
1. Mouse Not Responding
- Check if the mouse is powered on.
- Ensure batteries are correctly installed and not depleted. Replace if necessary.
- For 2.4G connection, ensure the USB A receiver is securely plugged into a working USB port.
- For Bluetooth connection, verify that Bluetooth is enabled on your device and the mouse is paired. Try re-pairing if connection is lost.
- Try connecting the mouse to a different USB port or another device to rule out port or device issues.
2. Cursor Movement is Erratic or Slow
- Clean the optical sensor on the bottom of the mouse.
- Ensure you are using the mouse on a suitable surface. Optical mice perform best on non-reflective, uniform surfaces.
- Adjust the DPI sensitivity using the DPI switch button on the mouse.
3. Side Buttons Not Working on macOS
- As noted in the product features, side buttons are not compatible with macOS. This is expected behavior.
Specifications
| Feature | Detail |
|---|---|
| Model | BM307 (Internal Model) / B0DP2DCC6N (ASIN) |
| Connectivity Technology | Bluetooth (5.0/3.0), 2.4G Wireless (USB A) |
| DPI Levels | 800, 1200, 1600, 2400, 3200, 4800 |
| Movement Detection Technology | Optical |
| Special Features | Ergonomic Design, Silent Click, Automatic Sleep |
| Power Source | 2 x AAA Batteries (not included) |
| Item Weight | 3.52 ounces |
| Package Dimensions | 4.49 x 3.23 x 1.73 inches |
| Compatibility | Windows, macOS (side buttons not compatible), Chrome, Linux |
Warranty and Support
TECKNET offers a 36-month warranty for registered products. If you encounter any problems using the product, please contact our professional customer service team for assistance.
Contact Information: Refer to the product packaging or the official TECKNET website for the most up-to-date support contact details.
