Aykah Aura King Size Bed Frame with Storage Instruction Manual

1. Introduction

Thank you for choosing the Aykah Aura King Size Bed Frame with Storage. This manual provides essential information for the safe assembly, operation, and maintenance of your new bed frame. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

The Aykah Aura bed frame features a modern wingback design, an upholstered headboard, and a convenient hydraulic lift-up storage system, eliminating the need for a box spring.

2. Safety Information

• Weight Limit: Do not exceed a total weight limit of 600 pounds (including mattress and occupants).
• Assembly: Always follow the assembly instructions carefully to prevent instability or collapse. Ensure all bolts and fasteners are securely tightened.
• Sharp Edges: Be cautious of sharp edges or pinch points during assembly and operation of the hydraulic lift mechanism.
• Children: Keep children away from the bed frame during assembly. Do not allow children to play with the hydraulic lift mechanism.
• Mattress Compatibility: Ensure your mattress is compatible with the bed frame dimensions. A mattress over 12 inches thick may interfere with the storage mechanism.
• Placement: Place the bed frame on a level surface.

3. Package Contents

Your Aykah Aura King Size Bed Frame is delivered in two boxes. Please verify that all components are present before beginning assembly. The tools and parts required for assembly are typically provided within the headboard compartment.

Expected Components:

• Upholstered Headboard
• Upholstered Footboard
• Side Rails (Left and Right)
• Metal Bed Frame with Slat System
• Hydraulic Storage Mechanism
• Center Support Legs (Metal)
• Hardware Pack (bolts, washers, nuts, Allen wrench)

4. Setup and Assembly Instructions

Assembly typically takes 1-2 hours with two people. Follow the step-by-step instructions provided in the included assembly guide. Ensure you have adequate space for assembly.

General Assembly Steps:

1. Unpack all components and lay them out on a clean, soft surface to prevent scratches.
2. Identify all parts and hardware using the provided parts list.
3. Assemble the main bed frame structure by attaching the side rails to the headboard and footboard.
4. Install the metal center support legs for added stability.
5. Attach the hydraulic storage mechanism to the bed frame.
6. Place the wooden slats into the designated positions on the metal frame. Ensure they snap securely into place.
7. Tighten all bolts and fasteners securely, but do not overtighten.

Image: The internal metal frame and wooden slat system, showing the hydraulic lift mechanism in an open position. This illustrates the robust construction and the components involved in the storage function.

Image: Diagram showing the dimensions of the King size bed frame (85" L x 83.5" W x 45.6" H headboard, 14" H base) and its maximum weight capacity of 600 lbs. The storage opens up to 33 inches.

5. Operating Instructions

Using the Hydraulic Lift Storage:

The Aykah Aura bed frame features an effortless hydraulic lift-up system for accessing the under-bed storage. To open the storage compartment:

1. Ensure there is no excessive weight on the mattress.
2. Grip the fabric loops or designated handles located at the foot end of the bed.
3. Gently lift the mattress platform upwards. The hydraulic mechanism will assist in lifting and holding the platform in the open position.
4. To close, gently pull the mattress platform downwards until it rests securely on the bed frame.

Image: A person demonstrating the effortless lifting of the mattress platform to reveal the spacious under-bed storage compartment, filled with various items.

Image: A comparison showing the Aykah Aura bed's 11-inch storage depth, capable of fitting four standard luggages, versus other beds with 8-inch storage that cannot fit a 9-inch luggage.

6. Maintenance

Upholstery Care:

• Regularly vacuum the upholstered surfaces using a soft brush attachment to remove dust and debris.
• For spills, blot immediately with a clean, dry cloth. Do not rub.
• For stubborn stains, consult a professional upholstery cleaner or use a mild fabric cleaner according to its instructions, testing on an inconspicuous area first.
• Avoid direct sunlight exposure for prolonged periods to prevent fading.

Frame Care:

• Periodically check all bolts and fasteners to ensure they remain tight. Retighten if necessary.
• Inspect the hydraulic mechanism for any signs of wear or damage. If issues are found, contact customer service.
• Keep the area under the bed clear of obstructions that could interfere with the hydraulic lift.

7. Troubleshooting

Common Issues:

• Bed Squeaks: Check all connections and tighten any loose bolts. Ensure the bed is on a level surface.
• Difficulty Lifting Mattress Platform: Ensure no heavy items are placed on the mattress when attempting to lift. Verify the hydraulic mechanism is installed correctly and not obstructed.
• Mattress Slides: Ensure the mattress is properly centered on the slat system. If sliding persists, consider using a non-slip mattress pad.
• Missing Parts/Damaged Components: If you encounter any missing parts or damaged components upon delivery, please contact Aykah customer service immediately.

8. Specifications

9. Warranty and Customer Support

Aykah is committed to providing quality products and customer satisfaction. If you encounter any problems during the installation process, or if you are unsatisfied for any reason, please contact our customer service team for support.

For warranty information and claims, please refer to the specific warranty documentation included with your purchase or contact Aykah customer service directly. Our professional team is available to assist you.