1. Safety Instructions
Please read these instructions carefully before installation and use. Retain this manual for future reference.
- Electrical Safety: Installation should be performed by a qualified electrician to ensure safety and compliance with local electrical codes. Always turn off the main power supply before installation, maintenance, or repair.
- Voltage: This product operates on AC 85V-265V. Ensure your power supply matches this requirement.
- Water Resistance: The light fixture is IP65 rated, meaning it is protected against dust and low-pressure water jets. While suitable for outdoor use, avoid submerging it in water.
- Installation Height: For optimal motion detection, install the light at a height of approximately 1.8 to 2.5 meters (5.9 to 8.2 feet).
- Operating Temperature: Ensure the operating environment is within the specified temperature range to prevent damage.
2. Package Contents
Verify that all components are present before beginning installation:
- DELIPOP LED Wall Light (2 units)
- Mounting Hardware (screws, wall anchors)
- Instruction Manual
3. Product Features
- Integrated Motion Sensor: Detects movement within 3 to 8 meters (10 to 26 feet) at a 120° angle.
- Automatic Operation: Light turns on automatically at night when motion is detected and turns off approximately 15 seconds after no motion is detected.
- Energy Efficient LED: 24W power consumption with a long lifespan of over 50,000 hours.
- Warm White Illumination: 3000K color temperature for a comfortable and inviting ambiance.
- Durable Construction: Made from die-cast aluminum alloy body and PC lampshade, resistant to rust, yellowing, high temperatures, and impacts.
- IP65 Waterproof: Designed for outdoor use, resistant to various weather conditions.
Figure 3.1: Product dimensions and key components including high-quality LED chip, die-cast aluminum lamp body, and PIR motion sensor.
4. Specifications
| Attribute | Value |
|---|---|
| Brand | DELIPOP |
| Model | 24W LED Wall Light with Motion Sensor |
| Dimensions (L x W x H) | 29 x 10 x 9 cm (11.41 x 3.93 x 3.54 inches) |
| Weight | 1.8 Kilograms (per unit, for 2 units) |
| Voltage | AC 85V-265V |
| Power | 24 Watts |
| Luminous Flux | 2370 Lumens |
| Color Temperature | 3000K Warm White |
| Material | Aluminum, Polycarbonate (PC) |
| Waterproof Rating | IP65 |
| Motion Sensor Angle | 120° |
| Motion Sensor Range | 3-8 meters (10-26 feet) |
| Auto-off Delay | Approx. 15 seconds (after no motion) |
| Lifespan | > 50,000 hours |
| Energy Efficiency Class | E |
Figure 4.1: EU Energy Efficiency Label for the DELIPOP light. For more details, refer to the EPREL database (QR code link).
5. Installation Guide
Important: Always ensure the main power supply is turned off before starting installation. It is recommended to have this product installed by a professional electrician.
- Prepare the Installation Area: Choose a suitable wall location, ideally between 1.8 to 2.5 meters (5.9 to 8.2 feet) high, for optimal motion sensor performance. Ensure the surface is clean and stable.
- Mark Drilling Points: Use the mounting bracket (if separate) or the fixture itself as a template to mark the drilling points on the wall.
- Drill Holes: Drill holes at the marked points using an appropriate drill bit for your wall material. Insert wall anchors if necessary.
- Connect Wiring: Carefully connect the household electrical wires to the light fixture's wires. Ensure correct polarity (Live, Neutral, Ground) according to local electrical standards. Use appropriate wire connectors and ensure all connections are secure and insulated.
- Mount the Fixture: Secure the light fixture to the wall using the provided screws. Ensure it is firmly attached and stable.
- Restore Power: Once installation is complete and all connections are secure, turn the main power supply back on.
Figure 5.1: Example of the DELIPOP wall light installed on an exterior wall.
6. Operating Instructions
The DELIPOP LED wall light features an integrated motion sensor for automatic operation.
- Daytime Operation: During daylight hours, the light will remain off to conserve energy, even if motion is detected.
- Nighttime Operation: When it is dark, the motion sensor becomes active. If motion is detected within its 3-8 meter range and 120° angle, the light will automatically turn on.
- Automatic Shut-off: The light will remain on as long as continuous motion is detected. Approximately 15 seconds after no motion is detected, the light will automatically turn off.
Figure 6.1: Visual representation of the motion sensor's operational cycle, including daytime standby, nighttime activation, and automatic deactivation.
7. Care and Maintenance
Regular cleaning and proper care will ensure the longevity and optimal performance of your DELIPOP wall light.
- Cleaning: Disconnect power before cleaning. Wipe the fixture with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or components.
- Inspection: Periodically check the fixture for any signs of damage, loose connections, or wear. If any issues are found, consult a qualified electrician.
- LEDs: The integrated LED light source is designed for a long lifespan and is not user-replaceable.
Figure 7.1: The DELIPOP wall light is designed to be IP65 waterproof and resistant to cold weather conditions.
8. Troubleshooting
If you encounter issues with your DELIPOP wall light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on at night. | 1. No power supply. 2. Sensor obstructed or faulty. 3. Still too bright (daylight sensor active). | 1. Check power connections and circuit breaker. 2. Ensure sensor is clean and unobstructed. Test sensor by waving hand. 3. Wait until it is sufficiently dark. |
| Light stays on continuously. | 1. Continuous motion detected. 2. Sensor faulty. | 1. Ensure no constant movement (e.g., swaying branches, pets) is within sensor range. 2. Contact customer support if problem persists after checking for motion. |
| Light flickers or dims. | 1. Unstable power supply. 2. Loose wiring connection. | 1. Consult an electrician to check power stability. 2. Turn off power and check all wiring connections. Re-secure if loose. |
9. Warranty and Support
DELIPOP is committed to providing high-quality products. For any questions, concerns, or technical support regarding your LED wall light, please contact DELIPOP customer service through your purchase platform.
Please refer to your purchase documentation for specific warranty terms and conditions.
