HANGKAI 6-in-1 Hydrodermabrasion Beauty Machine User Manual

1. Introduction

The HANGKAI 6-in-1 Hydrodermabrasion Beauty Machine is a versatile device designed for professional skin care applications. It integrates multiple functions to provide comprehensive facial treatments, including skin cleansing, rejuvenation, wrinkle reduction, and enhanced nutrient absorption. This manual provides essential information for the safe and effective operation and maintenance of your device.

This product is suitable for use in beauty centers, beauty salons, skin care centers, and similar professional environments.

2. Safety Information

• Always read this user manual carefully before operating the machine, paying special attention to all safety precautions.
• Do not use unsafe power sources or attempt illegal operations.
• In case of malfunction, refer to the troubleshooting section of this manual. Do not disassemble the device without authorization.
• Keep the product out of reach of children.
• Avoid placing the product near high temperatures or open flames.

3. Package Contents

Verify that all items listed below are included in your package:

• 1 x 6-in-1 Hydrogen and Oxygen Beauty Machine
• 1 x Microelectric Head
• 1 x HF Radio Frequency Head
• 1 x Ultrasonic Head
• 1 x Ice Seal Repair Head
• 1 x Oxygen Filling Catheter
• 1 x Support Stand
• 1 x Power Cable
• 1 x User Manual
• Other necessary accessories

Figure 3.1: All components included in the package. An overhead view displaying all items included in the package: the main beauty machine, six different treatment heads, a support stand, power cable, oxygen filling catheter, and the user manual.

4. Product Overview

The HANGKAI 6-in-1 Hydrodermabrasion Beauty Machine is designed with user convenience and professional performance in mind. It features a modern white plastic casing, a touch control interface, and anti-slip footrests for stability.

Figure 4.1: HANGKAI 6-in-1 Hydrodermabrasion Beauty Machine. A clear view of the HANGKAI 6-in-1 Hydrodermabrasion Beauty Machine, showcasing its main unit, the array of treatment probes, and the transparent solution bottles. The digital display is visible on the front.

Figure 4.2: Front view of the machine. This image provides a detailed front view of the machine, emphasizing the touch control screen and the transparent bottles for water and consumed solutions, allowing for easy monitoring.

Figure 4.3: Rear panel connections. The back of the machine is shown, detailing the power input, on/off switch, and multiple ports for connecting the various treatment heads and accessories. A label with model information is also visible.

Figure 4.4: Treatment heads and connections. A detailed shot of the six distinct treatment heads, including the microelectric head, RF head, ultrasonic head, ice seal repair head, and oxygen filling catheter, along with their respective cable connections to the main unit.

5. Setup

The machine requires some assembly before first use.

1. Unpack Components: Carefully remove all items from the packaging and verify against the 'Package Contents' list.
2. Position the Machine: Place the main unit on a stable, flat countertop. The anti-slip footrests will help secure it.
3. Attach the Support Stand: Install the provided support stand for the treatment heads. This stand allows for easy access and organized placement of the probes.
4. Connect Treatment Heads: Connect each of the six treatment heads (Microelectric, HF Radio Frequency, Ultrasonic, Ice Seal Repair, Oxygen Filling Catheter, and Bubble Cleaner) to their corresponding ports on the machine. Ensure connections are secure.
5. Fill Solution Bottles: Fill the transparent solution bottles with the appropriate skin care solutions or purified water as required for your treatments. The visible design allows you to monitor fluid levels.
6. Connect Power: Plug the power cable into the machine's power input port on the rear panel, then connect it to a suitable power outlet.

6. Operating Instructions

The machine features a touch control interface for easy operation.

1. Power On: Turn on the main power switch located on the rear panel of the machine. The touch screen will illuminate.
2. Select Function: Use the touch screen to select the desired treatment function. The 6-in-1 machine offers various modes for different skin care needs.
3. Adjust Settings: Depending on the selected function, adjust parameters such as intensity, time, and mode via the touch screen.
4. Perform Treatment: Apply the appropriate treatment head to the client's skin as per standard professional protocols for hydrodermabrasion, microcurrent, radio frequency, ultrasonic, or ice seal treatments.
5. Monitor Progress: Observe the client's skin reaction and adjust settings as necessary. The transparent solution bottles allow monitoring of water and consumed solution levels.
6. Power Off: After completing the treatment, turn off the machine using the main power switch.

7. Maintenance and Cleaning

Regular cleaning and maintenance are crucial for the longevity and optimal performance of your beauty machine.

• External Cleaning: Clean the exterior of the machine regularly with a soft, damp cloth. Do not use abrasive cleaners or solvents.
• Internal Water Pipe Cleaning: If the internal water pipes require cleaning, follow these steps:
  1. Inject warm water into the purification water bottle.
  2. Block a section of the pipe with one hand.
  3. Turn on the bubble pen switch. This action will automatically collect dirt from the pipe into the dirty water bottle.
• Probe Cleaning: Clean all treatment heads after each use according to hygiene standards to prevent cross-contamination.
• Storage: Store the machine in a clean, dry place away from direct sunlight and extreme temperatures.

8. Troubleshooting

If you encounter any issues with your machine, please refer to the following general guidelines:

• No Power: Ensure the power cable is securely connected to both the machine and the power outlet, and that the main power switch is in the 'ON' position. Check the power source.
• Function Not Working: Verify that the correct treatment head is connected and that the settings on the touch screen are properly configured for the selected function.
• Fluid Flow Issues: Check the solution bottles to ensure they are adequately filled and that there are no blockages in the hoses. Perform the internal water pipe cleaning procedure if necessary.
• Unusual Noises/Smells: Immediately power off the machine and disconnect it from the power source. Contact customer support for assistance.

For any malfunctions not covered here, or if troubleshooting steps do not resolve the issue, do not attempt to repair the device yourself. Contact qualified service personnel.

9. Specifications

Figure 9.1: Product Dimensions. This image illustrates the physical dimensions of the HANGKAI 6-in-1 Hydrodermabrasion Beauty Machine, showing its length (36cm / 14.2 inches), width (30cm / 11.8 inches), and height (34cm / 13.4 inches).

10. Warranty and Support

For warranty information or technical support, please refer to the documentation provided at the time of purchase or contact your vendor. Keep your purchase receipt as proof of purchase.