Introduction
The Rakiie Back Support Belt, Model ESP005, is designed to provide comprehensive lumbar support and alleviate back discomfort. Featuring an 8-point support system with memory-aluminum bars and flexible SBR material, it aims to stabilize the spine and reduce pressure. The integrated 3D massage pad offers additional relief by promoting blood circulation and reducing muscle fatigue. Constructed with breathable 3D knitted fabric, this belt ensures comfort during prolonged wear, adapting seamlessly to various daily activities.
Safety Information
- Consult a healthcare professional before using this product if you have pre-existing medical conditions, especially related to your back or circulatory system.
- Do not overtighten the belt, as this may restrict circulation or cause discomfort.
- Discontinue use if you experience increased pain, numbness, tingling, or skin irritation.
- Keep out of reach of children.
- This product is not a substitute for medical treatment.
Setup and Application
Follow these steps to correctly apply your Rakiie Back Support Belt:
- Prepare the Belt: Ensure the belt is clean and free from any twists.
- Position the Belt: Place the main support panel of the belt against your lower back, centering it over your spine. The bottom edge of the belt should sit just above your hip bones.
- Secure the Primary Fastener: Wrap the main section of the belt around your waist and secure the primary Velcro fastener at the front. Ensure it is snug but comfortable.
- Adjust Compression Straps: Use the two elastic compression straps on the sides to further adjust the level of support. Pull them forward and attach them to the main fastener. Adjust these straps to achieve your desired level of compression and support without causing excessive pressure.
- Check Fit: The belt should feel supportive and comfortable, allowing for natural movement without slipping or bunching.


Operating Instructions
The Rakiie Back Support Belt is designed for continuous comfort and effective support throughout your day. Its features work together to provide optimal relief:
- 8-Point Support System: The belt incorporates 4 memory-aluminum alloy bars, 2 elastic springs, and 2 polypropylene bars to provide robust and stable support to your lumbar region. This system helps maintain the natural curvature of your spine and reduces pressure.
- 3D Massage Pad: An innovative removable 3D massage pad is included to offer deep massage to the lumbar spine. This feature helps reduce muscle fatigue and promotes blood circulation, enhancing comfort during extended wear.
- Ergonomic Design: The belt is ergonomically designed with graduated pressure distribution, ensuring even pressure across different areas for maximum support and comfort.
- Breathable Fabric: Made from premium 3D breathable knitted fabric, the belt keeps you cool and dry. This material prevents heat buildup and skin discomfort, making it suitable for all-day use.
- Adjustable Compression: The dual elastic compression straps allow you to customize the level of pressure and support according to your individual needs, ensuring a secure and comfortable fit.



Sizing Guide
To ensure the best fit and optimal support, measure your waist circumference at your navel. Do not use your pants size. Refer to the chart below:

| Size | Waist Measurement (inches) | Waist Measurement (cm) |
|---|---|---|
| S | 28.7 - 35.8 | 73 - 91 |
| M | 32.3 - 39.8 | 82 - 101 |
| L | 35.8 - 43.7 | 91 - 111 |
| XL | 39.4 - 47.6 | 100 - 121 |
| XXL | 43.3 - 52.4 | 110 - 133 |
Note: It is recommended to size up if your waist measurement is at the top of a size range.
Maintenance
Proper care will extend the life of your Rakiie Back Support Belt:
- Cleaning: Hand wash only. Use mild soap and cold water. Do not bleach.
- Drying: Air dry completely. Do not tumble dry, iron, or dry clean. Avoid direct sunlight.
- Storage: Store in a cool, dry place away from direct heat and sunlight. Ensure Velcro fasteners are closed to prevent snagging other fabrics.
Troubleshooting
If you encounter any issues with your Rakiie Back Support Belt, consider the following:
- Discomfort or Skin Irritation: Ensure the belt is not overtightened. Check for proper sizing. If irritation persists, discontinue use and consult a healthcare professional.
- Belt Slipping: Re-adjust the primary fastener and compression straps to achieve a snug fit. Ensure you have selected the correct size according to the sizing guide.
- Reduced Support: Check if the belt is positioned correctly on your lower back. Ensure the fasteners are securely attached. Over time, Velcro may lose some effectiveness; ensure it is clean and free of lint.
Specifications
| Feature | Detail |
|---|---|
| Model Number | ESP005 |
| Brand | Rakiie |
| Color | Blue |
| Age Range | Adult |
| Support System | 8-point (4 memory-aluminum bars, 2 elastic springs, 2 polypropylene bars) |
| Special Features | Removable 3D massage pad, Breathable 3D knitted fabric, Adjustable compression straps |
| Care Instructions | Hand wash only |
| Package Dimensions | 27.61 x 24.99 x 7.9 cm |
| Item Weight | 449 grams |
Warranty and Support
Rakiie products come with a 1-year product protection. For any questions, concerns, or support needs regarding your Rakiie Back Support Belt, please contact Rakiie customer service. We are committed to providing round-the-clock customer support and hassle-free replacement services to ensure your satisfaction.
Please refer to the contact information provided with your purchase or visit the official Rakiie website for further assistance.

